Re: network configuration problems

From: X (zoran.majcenic_at__NO_SPAM_inet.hr)
Date: 06/17/03 

Date: Tue, 17 Jun 2003 15:52:55 +0200

Hi,

Thanks for responding.

lsattr -El ent1 gives

bus_intr_lvl 12 Bus interrupt level False

intr_priority 3 Interrupt priority False

xmt_que_size 512 TRANSMIT queue size True

bus_mem_addr 0xd0000 Bus memory address False

dma_bus_mem 0x342000 Address of bus memory used for DMA False

bus_io_addr 0x7280 Bus I/O address False

dma_lvl 3 DMA arbitration level False

bnc_select dix Adapter CONNECTOR True

use_alt_addr no Enable ALTERNATE ETHERNET address True

alt_addr 0x ALTERNATE ETHERNET address True

rec_pool_size 37 RECEIVE buffer pool size True

lsattr -El en1 gives:

mtu 1500 Maximum IP Packet Size for This Device True

remmtu 576 Maximum IP Packet Size for REMOTE Networks True

netaddr 10.16.38.42 Internet Address True

state up Current Interface Status True

arp on Address Resolution Protocol (ARP) True

netmask 255.255.0.0 Subnet Mask True

security none Security Level True

authority Authorized Users True

broadcast Broadcast Address True

netaddr6 N/A True

alias6 N/A True

prefixlen N/A True

alias4 N/A True

rfc1323 N/A True

tcp_nodelay N/A True

tcp_sendspace N/A True

tcp_recvspace N/A True

tcp_mssdflt N/A True

lcsfg -vl ent1 gives:

DEVICE LOCATION DESCRIPTION

ent1 00-02 Ethernet High-Perfomance LAN

Adapter (8ef5)

Network address 02608C2DC756

ROS Level and ID 0015

Displayable Message 802.3/ETHERNET

Part Number 000G3369

EC Level C73859

Device Driver Level 01

Dignostic Level 01

FRU Number 000G3368

Serial Number 00189163

Manufacturer 204491

And yes I can ping the address of the card.

"Steve Nottingham" <steve@wakefieldrfc.freeserve.co.uk> wrote in message
news:42862645.0306170431.23fe8452@posting.google.com...
> "X" <zoran.majcenic@_NO_SPAM_inet.hr> wrote in message
news:<bcmp42$79aq$1@as201.hinet.hr>...
> > Hello,
> >
> > I came in posession of one RS/6000 7006 model. It have one built-in
network
> > card and one additional.
> > Neither have UTP connector. Built-in has AUI (if I identify it
correctly),
> > additional AUI and BNC.
> > I also have one convertor from IBM:
> > Ethernet Type 10-BaseT Transceiver
> > I have connected this convertor to additional card because it doesn't
fit
> > tightly into a base card, plugged-in
> > network cable, and have transmit and receive leds glowing.
> > OS is AIX 5.1 ML3 and I have used smit tcpip to configure en1.
> > But I simply can not ping in our out. I have played with cable type
option
> > but that didn't get me far.
> > Can anyone advise how to configure network ?
> >
> > Thanks
>
> Is the cable from the card going into a switch ? I believe the card
> will only support 10 Mbs, so check your switch settings if needed.
>
> What output do you get from lsattr -El ent1, lsattr -El en1 and lscfg
> -vl ent1 ?
>
> Can you can ping the IP address of the card ?
>
> Steve

Relevant Pages

  • Re: 802.11g and Pocket PCs
    ... I DO have the Linksys WCF54G card, ... > network is not my game. ... >> within a device bus with external communications with a network. ... >>> slow the university network down, do to the frequent need to wait for ...
    (microsoft.public.pocketpc.wireless)
  • Re: 802.11g and Pocket PCs
    ... I DO have the Linksys WCF54G card, ... network is not my game. ... > I don't like to adopt radicalism in any field of my life. ... > within a device bus with external communications with a network. ...
    (microsoft.public.pocketpc.wireless)
  • Re: P5/Celeron comments?
    ... type of video capture card require. ... That restriction is caused by the mix of PCI Express and PCI ... which means a PCI bus card may get the "short straw". ... and you only get time slices from each camera. ...
    (alt.comp.periphs.mainboard.asus)
  • My First Posted Trip Report... Day 6 of 8
    ... This is the first time I've actually POSTED a trip report on radp although I've made up several and put them on my web site lame though it may be. ... Didn't bother to go back to BWV since the bus that goes there also comes here. ... When we got to the Dolphin, some little girl tried to reach up to the hand grips for standing passengers and missed it by a good four inches. ... Now, earlier in the day, I had gotten a new room card because I've had so many problems with vendors not being able to swipe the card and get the info off the magnetic stripe. ...
    (rec.arts.disney.parks)
  • Why SGPoreans so fierce and violent?
    ... She claws driver till he BLEEDS ... concession card ... But inside his bus cabin, the 33-year-old driver was helpless against ... concession card. ...
    (soc.culture.singapore)