Re: 4.3.3.0 upgraded to ML11, but still missing some filesets

From: Ken (ucstyle_at_hotmail.com)
Date: 09/25/03 

Date: 25 Sep 2003 07:42:33 -0700

I agree,
If you do a 'oslevel -rl 4330-11' it will show you the missing
filesets that are a lower level. These filesystems will show the
current level of files and what they need to be upgraded to.

HTH

"Andreas Schulze" <b79xan@gmx.de> wrote in message news:<bkse4f$emh6@news-1.bank.dresdner.net>...
> "Peter Harding" <peterharding@yahoo.com> schrieb im Newsbeitrag
> news:bf403c5e.0309240719.4824ab2b@posting.google.com...
> > Hi,
> >
> > I've just upgraded a 4.3.3.0 system with no ML's applied to ML11, this
> > was a success apart from a:
> > "ifor_ls.compat.gui 4.3.3.25 Requisite failure"
> >
> > oslevel -r gives me: 4330-04
> > and a instfix -i|grep ML gives me:
> >
> > All filesets for AIX43ML were found.
> > All filesets for 4.3.0.0_AIX_ML were found.
> > All filesets for 4.3.1.0_AIX_ML were found.
> > All filesets for 4.3.2.0_AIX_ML were found.
> > All filesets for 4.3.3.0_AIX_ML were found.
> > All filesets for 4330-02_AIX_ML were found.
> > Not all filesets for 4320-02_AIX_ML were found.
> > All filesets for 4330-03_AIX_ML were found.
> > All filesets for 4330-04_AIX_ML were found.
> > Not all filesets for 4330-05_AIX_ML were found.
> > All filesets for 4330-01_AIX_ML were found.
> > Not all filesets for 4330-06_AIX_ML were found.
> > Not all filesets for 4330-07_AIX_ML were found.
> > Not all filesets for 4330-08_AIX_ML were found.
> > Not all filesets for 4330-09_AIX_ML were found.
> > Not all filesets for 4330-10_AIX_ML were found.
> > Not all filesets for 4330-11_AIX_ML were found.
> >
> > I downloaded ML11 from IBM (4330011.tar.gz), so it should contain
> > *all* the filesets. Why are some of them missing?
> >
> > Thanks,
> > Pete.
>
> Hallo Peter,
>
> did you make sure, that you got the ML11 from ML00 on from the download
> page? You need to supply information both about the level you come from and
> the level you want to reach to get the corret ML package. In fact there may
> be 10 different ML11 packages. Should you choose the ML11 package from a
> higher level it will be smaller but some files will be missing resulting in
> your system staying downlevel. In your case I would recommend to get an ML11
> package from ML0 on (e.g. all updates ever published for 4.3.3) to try and
> close the gaps. If that does not work try to get two packages: one from ML0
> to ML06 and the second from ML06 to ML11 (that did help me on one occasion).
>
> HTH
> Andreas

Relevant Pages