6 Multiple Choice questions

From: HL (disclosure_email_at_yahoo.com)
Date: 03/31/04 

Date: 31 Mar 2004 07:27:00 -0800

Do I answer the following questions correctly?

1. The qdaemon subsystem is not running. What command can be used to
start it?
A. telinit q
B. init -s qdaemon
C. refresh -s qdaemon <<<
D. startsrc -s qdaemon

2. After installing fileset updates to upgrade the system from 4.3.2
to 4.3.3, the "oslevel" command still reports the oslevel to be
"4.3.2.0". What can be done to determine which filesets still need to
be upgraded so the oslevel command will report "4.3.3.0"?
A. lppchk -v
B. oslevel -l 4.3.3.0 <<<
C. installp -l 4.3.3.0
D. instfix -q -l 4.3.3.0

3. A system admin has just set up a new machine with two external hard
disks in an ultra SCSI chain. One is 9.1GB ultra SCSI SE disk and the
other is a 18.2 GB Differential disk. The system admin reboots the
machine and notices that only the SE disk is available. Which of the
following is the most likely cause?
A. There is a SCSI conflict between the two drives
B. The SE and Differential drives are on the same chain <<<
C. The SE disk is probably experiencing hardware problems
D. The Differential disk is probably experiencing hardware problems

4. A system administrator's daily monitoring has revealed a failing
disk drive. Where would this information be revealed?
A. lspv
B. errpt <<<
C. syslog
D. /var/adm/messages

5. A daemon program named "dbupdater" runs under the user "dbrun". It
needs to have the environment variable "RECOVERY=YES" defined when it
initializes for the first time. Where should this environment variable
be defined?
A. In the /home/dbrun/.profile file
B. In the /.profile file
C. In the /etc/.profile file
D. In the /etc/security/environment file <<<

6. A system admin's daily monitoring has revealed a failing disk
drive. The drive that is failing, hdisk0, is a lvm mirrored drive.
What is the first step that should be taken in order to physically
replace this drive?
A. Remove the physical volume from the system
B. Remove the physical volume from the volume group <<<
C. Remove the physical partitions from the volume group
D. Remove the logical volume copies from the failing drive

Relevant Pages

  • Re: 6 Multiple Choice questions
    ... The qdaemon subsystem is not running. ... What command can be used to ... One is 9.1GB ultra SCSI SE disk and the ... The SE and Differential drives are on the same chain <<< ...
    (comp.unix.aix)
  • Re: Trying to install Win2000 on harddrive with bad C partition
    ... When I try to start the computer I'm receiving a Disk ... and other testing programs show both C and E drives as ... once you boot the CD, you can mount the dying drive and its ... At last you end up at the hallowed linux bash command prompt, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Windows XP boot failure
    ... If you have a friend with a real Windows ... read/write to the drives using a command line ... For more information on a specific command, ... CHKDSK Checks a disk and displays a status report. ...
    (microsoft.public.windowsxp.basics)
  • Re: Problems with Booting XPe from CD-ROM
    ... enable command to EWFMGR when running etprep. ... With the two partitions on the disk, I assume the rest of the drive is ... Why Taskmanager Shell is behaving differently that Command shell is a bit ... that USB drives will not function. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Problems with Booting XPe from CD-ROM
    ... If you look at the history, running EWFMGR before ETPREP was part of the solution. ... With the two partitions on the disk, I assume the rest of the drive is left unpartioned. ... Why Taskmanager Shell is behaving differently that Command shell is a bit of a mistery. ... that USB drives will not function. ...
    (microsoft.public.windowsxp.embedded)