Switching server on after power failure?

From: Charles Lavin (x_at_x.x)
Date: 10/08/05

  • Next message: shpot4_at_yahoo.com: "Re: /usr/sbin/acct/lastlogin" 
    Date: Sat, 8 Oct 2005 13:27:44 -0400

    Hi --

    I have an RS/6000 model 7043 (43p-140) running AIX 5. How do I set it up to
    switch itself back on when power resumes (i.e. after a power failure)? I've
    been all over SMIT and I can't find (or understand?) the option.

    I have a model 7013 running AIX 3 that switches itself on automatically upon
    resumption of power. The 7043 needs to be manually switched on every time.

    Thanks,
    CL

  • Next message: shpot4_at_yahoo.com: "Re: /usr/sbin/acct/lastlogin"

    Relevant Pages

    • Re: Bridgeport boss 4 Spindle not powering up (continued)
      ... you need to reset a safety interlock on the motor switch pod ... I can work my way through the average power ... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive). ...
      (rec.crafts.metalworking)
    • Re: PC doesnt start
      ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ...
      (microsoft.public.windowsxp.hardware)
    • Re: Protecting the system
      ... Two notices, one "press briefly to shut down" pointing at the power button, ... the plug or, if it has a switch, the PSU. ... minimise writes to the flash device which ext3 would be constantly doing ... The other thing I need to store is the system configuration files - ...
      (uk.comp.os.linux)
    • Re: second power supply
      ... How often do you reach to the back of the computer and switch the main PSU switch off? ... there is always power to the ... The link I provided was to show the workings and wiring of the PS-ON mechanism on a PSU and to counter your argument that more needed to be done than closing the circuit in question to get the PSU to work. ...
      (microsoft.public.windowsxp.general)
    • Re: What about this Amp
      ... It doesn't have the lit up rocker switches, it has 2 toggles, and the power light is small and square... ... Somebody thought that there's already a spot on the switch, and all you have to do is solder. ... I have a customized Marshall Vintage 30 2x12 cab that I sometimes use. ... Less preamp tubes makes it easier and cheaper to get more gain. ...
      (alt.guitar)