Re: server hangs at sms menu?
From: Chris (chris.young_at_sigmaintegrators.com)
Date: 10/11/05
- Next message: vlad.zam_at_gmail.com: "Re: Maximum number of HMCs that can connect to a p5 system: can it be changed?"
- Previous message: admin_at_loial.co.uk: "Re: USB Flash drive on p-series"
- In reply to: Mike: "server hangs at sms menu?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 11 Oct 2005 05:47:50 -0700
1. This is a biggie... make sure that if you are using a Serial
heartbeat that the heartbeat cable is NOT connected to S2. On servers
with more than two Serial adapters, S1 and S2 are considered console
cables. If for one reason or another HA doesn't shutdown properly (and
both nodes shutdown at the same time, the slower server - still active
with HA will send signals across the serial cable which I've seen cause
this problem.)
2. There is a possibility of noise on the serial port causing the SMS
menus to be called - but unlikely.
Chris Young
Consultant
riscguru@yahoo.com
- Next message: vlad.zam_at_gmail.com: "Re: Maximum number of HMCs that can connect to a p5 system: can it be changed?"
- Previous message: admin_at_loial.co.uk: "Re: USB Flash drive on p-series"
- In reply to: Mike: "server hangs at sms menu?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
