comp.unix.aix

• Thread Index

---

• Re: installing openssh on AIX 5.2
  • From: Hajo Ehlers
• Re: installing openssh on AIX 5.2
  • From: Richard Kopec
• Re: Wide Area Clustering with AIX
  • From: Patrick
• phantom disk in pdt
  • From: Patrick
• Addendum as always Re: installing openssh on AIX 5.2
  • From: Hajo Ehlers
• Re: installing openssh on AIX 5.2
  • From: Hajo Ehlers
• Re: installing openssh on AIX 5.2
  • From: Richard Kopec
• Re: FC adapters?
  • From: Dan Foster
• FC adapters?
  • From: Mike
• Re: A lot of paging, but only 70 % Memory used
  • From: Jurjen Oskam
• Re: installing openssh on AIX 5.2
  • From: Hajo Ehlers
• Re: installing openssh on AIX 5.2
  • From: Richard Kopec
• Re: create virtual disk and add this to a logical volume
  • From: John
• Re: installing openssh on AIX 5.2
  • From: Hajo Ehlers
• Re: odd issue with file system
  • From: Hajo Ehlers
• Re: A lot of paging, but only 70 % Memory used
  • From: F. Michael Orr
• installing openssh on AIX 5.2
  • From: Richard Kopec
• A lot of paging, but only 70 % Memory used
  • From: axelsche
• Re: odd issue with file system
  • From: rancidmoth
• Re: odd issue with file system
  • From: rancidmoth
• Re: odd issue with file system
  • From: rancidmoth
• AIX-SYSADMIN CERTIFICATION-Reg.
  • From: certking
• create virtual disk and add this to a logical volume
  • From: jbercx@xxxxxxxx
• Re: odd issue with file system
  • From: Laurenz Albe
• Re: Multiple NIM masters on same network
  • From: Hajo Ehlers
• Re: odd issue with file system
  • From: Hajo Ehlers
• Re: odd issue with file system
  • From: rancid moth
• odd issue with file system
  • From: rancid moth
• Re: AIX 5.3 on 43p
  • From: Dan Foster
• Re: AIX 5.3 on 43p
  • From: Mag
• Multiple NIM masters on same network
  • From: shpot4
• Re: AIX 5.3 on 43p
  • From: Dan Foster
• AIX 5.3 on 43p
  • From: Mag
• Wide Area Clustering with AIX
  • From: CernerJoe
• Re: Static IP address range for public network connectivity
  • From: unixsystems@xxxxxxxxx
• Re: varyonvg/varyoffvg command hung?
  • From: rs6000er
• Re: HACMP Non IP heartbeat between two buildings
  • From: unixsystems@xxxxxxxxx
• Re: HACMP Non IP heartbeat between two buildings
  • From: unixsystems@xxxxxxxxx
• Re: minimal hw/sw to start learning aix
  • From: Dave
• Re: mixing AIX 5.2 and AIX 5.3 on power5?
  • From: John
• Re: path of process.
  • From: Mark Taylor
• Re: How to share a directory on AIX with windows?
  • From: Mark Taylor
• Re: How to share a directory on AIX with windows?
  • From: Norman Black
• Re: path of process.
  • From: HuynhLoc
• Re: Additional memory on a lpar
  • From: Hajo Ehlers
• Re: mixing AIX 5.2 and AIX 5.3 on power5?
  • From: tmpolzin
• Re: Monitoring SAN with Tivoli ...
  • From: Greggy
• Re: Additional memory on a lpar
  • From: sk
• Additional memory on a lpar
  • From: Friedhelm Neyer
• Re: Changing home for root
  • From: Hajo Ehlers
• Re: Changing home for root
  • From: Laurenz Albe
• Re: How to share a directory on AIX with windows?
  • From: Frank Fegert
• How to share a directory on AIX with windows?
  • From: sanzen
• audit access to one directory only
  • From: rancid moth
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: mixing AIX 5.2 and AIX 5.3 on power5?
  • From: Frank Fegert
• Re: mixing AIX 5.2 and AIX 5.3 on power5?
  • From: Mike
• Re: minimal hw/sw to start learning aix
  • From: Dohhhh
• Re: mixing AIX 5.2 and AIX 5.3 on power5?
  • From: christiancolborn
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: minimal hw/sw to start learning aix
  • From: Dan Foster
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: minimal hw/sw to start learning aix
  • From: Dan Foster
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: sh,nawk,gcc
  • From: Mike
• mixing AIX 5.2 and AIX 5.3 on power5?
  • From: Mike
• Re: minimal hw/sw to start learning aix
  • From: Frank Fegert
• Re: minimal hw/sw to start learning aix
  • From: Dan Foster
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: minimal hw/sw to start learning aix
  • From: Dan Foster
• Re: minimal hw/sw to start learning aix
  • From: Frank Fegert
• Re: minimal hw/sw to start learning aix
  • From: Frank Fegert
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: minimal hw/sw to start learning aix
  • From: Dan Foster
• Re: minimal hw/sw to start learning aix
  • From: Ron Sesnaski
• Re: A simple question
  • From: rcee
• Re: minimal hw/sw to start learning aix
  • From: Frank Fegert
• Re: IBM Compiler Options
  • From: Uli Link
• minimal hw/sw to start learning aix
  • From: rsesnaski@xxxxxxxxx
• Re: varyonvg/varyoffvg command hung?
  • From: Steven
• Re: Changing home for root (Was: Re: root drive size)
  • From: Steven
• Re: Static IP address range for public network connectivity
  • From: Steven
• Re: Help with ftp user configuration.
  • From: Hajo Ehlers
• Re: root drive size
  • From: mousemo
• Re: Static IP address range for public network connectivity
  • From: Steve Greatbanks
• Re: Static IP address range for public network connectivity
  • From: unixsystems@xxxxxxxxx
• Re: AIX on an i5os partition? (BPIC)
  • From: christiancolborn
• Re: replacing rootvg with bigger disks- problems
  • From: Dan Foster
• sh,nawk,gcc
  • From: Guy Harrison
• Re: AIX on an i5os partition? (BPIC)
  • From: Dave
• AIX on an i5os partition? (BPIC)
  • From: christiancolborn
• Re: Changing home for root (Was: Re: root drive size)
  • From: Hajo Ehlers
• Re: smbmount on AIX
  • From: vlad . zam
• Changing home for root (Was: Re: root drive size)
  • From: Wil Cooley
• NIS AIX 5.2 Problem
  • From: yazoo[PL]
• Re: replacing rootvg with bigger disks- problems
  • From: vlad . zam
• Re: replacing rootvg with bigger disks- problems
  • From: Hajo Ehlers
• Re: console logging to syslog
  • From: Hajo Ehlers
• Re: varyonvg/varyoffvg command hung?
  • From: rs6000er
• Re: replacing rootvg with bigger disks- problems
  • From: Jurjen Oskam
• replacing rootvg with bigger disks- problems
  • From: pete
• Re: HACMP Non IP heartbeat between two buildings
  • From: steven.langdale@xxxxxxxxx
• HACMP Non IP heartbeat between two buildings
  • From: toto
• Re: console logging to syslog
  • From: peter
• Re: root drive size
  • From: Hajo Ehlers
• Re: root drive size
  • From: Steve Greatbanks
• Re: root drive size
  • From: Steve Greatbanks
• Re: Static IP address range for public network connectivity
  • From: Steve Greatbanks
• Re: AIX Fibre Attached Storage (SAN) to XP1024 and XP12K storage throughput problems
  • From: Markus Baertschi
• Re: SP node on house power?
  • From: Markus Baertschi
• Re: max nfs volume size
  • From: Patrick Begou
• Re: Nmon2Trend, webbased access to nmon trend/realtime graphs
  • From: Frank Fegert
• max nfs volume size
  • From: wmueller
• root drive size
  • From: mousemo
• Static IP address range for public network connectivity
  • From: unixsystems
• Re: qdaemon not running after system boot AIX 5.2
  • From: steven_nospam at Yahoo! Canada
• Nmon2Trend, webbased access to nmon trend/realtime graphs
  • From: snuf
• Re: qdaemon not running after system boot AIX 5.2
  • From: Hajo Ehlers
• Re: varyonvg/varyoffvg command hung?
  • From: Chris
• Re: qdaemon not running after system boot AIX 5.2
  • From: Chris
• smbmount on AIX
  • From: Patrick
• qdaemon not running after system boot AIX 5.2
  • From: steven_nospam at Yahoo! Canada
• varyonvg/varyoffvg command hung?
  • From: rs6000er
• Re: Link aggregation with Fibre Channels?
  • From: sk
• Link aggregation with Fibre Channels?
  • From: sk
• Re: AIX loadable modules
  • From: Patrick Begou
• Re: NSS_LDAP and AIX 5.1
  • From: Patrick Begou
• Re: AIX as openldap client
  • From: Patrick Begou
• Re: lsof - actual files open
  • From: Herbert Groot Jebbink
• Re: path of process.
  • From: 0xbeef
• Re: 43 P server error
  • From: Frank Fegert
• Re: Job Required
  • From: Frank Fegert
• Re: Question SRC's
  • From: base60
• Re: downloading bos.adt.libm
  • From: rynox
• Re: Strange ssh+NIS behaivor
  • From: Hajo Ehlers
• Addendum :Re: AIX Fibre Attached Storage (SAN) to XP1024 and XP12K ...
  • From: Hajo Ehlers
• Re: Strange ssh+NIS behaivor
  • From: Peter Hessler
• Re: AIX Fibre Attached Storage (SAN) to XP1024 and XP12K storage throughput problems
  • From: Hajo Ehlers
• Re: Strange ssh+NIS behaivor
  • From: Hajo Ehlers
• Re: Trying to edit .profile and use nano without super user privileges
  • From: Eric.Jones
• 43 P server error
  • From: Kamran
• Job Required
  • From: Kamran
• Re: AIX Fibre Attached Storage (SAN) to XP1024 and XP12K storage throughput problems
  • From: CernerJoe
• Strange ssh+NIS behaivor
  • From: Peter Hessler
• Re: AIX Fibre Attached Storage (SAN) to XP1024 and XP12K storage throughput problems
  • From: Dan Foster
• AIX Fibre Attached Storage (SAN) to XP1024 and XP12K storage throughput problems
  • From: CernerJoe
• Re: Maintanence level for AIX 5.2
  • From: Paul Landay
• Re: Trying to edit .profile and use nano without super user privileges
  • From: J-Rod
• Re: path of process.
  • From: Gary R. Hook
• Re: AIX loadable modules
  • From: Gary R. Hook
• Re: lsof - actual files open
  • From: Mark Taylor
• Re: lsof - actual files open
  • From: Mark Taylor
• Re: Open network ports - process ID
  • From: Mark Taylor
• Re: AIX loadable modules
  • From: Patrick Begou
• Re: Open network ports - process ID
  • From: Wil Cooley
• Open network ports - process ID
  • From: System Audit
• Secure LDAP with 64-bit SDK 1.4.2
  • From: Branden
• Re: path of process.
  • From: 0xbeef
• Re: AIX loadable modules
  • From: Patrick Begou
• Re: AIX loadable modules
  • From: Michael Kraemer
• Re: AIX 4.3 install problem
  • From: mizzleman
• AIX loadable modules
  • From: Patrick Begou
• ldap and auditing
  • From: Marco
• Re: Question SRC's
  • From: mbmuttur
• path of process.
  • From: HuynhLoc
• Re: Question SRC's
  • From: mbmuttur
• Question SRC's
  • From: rdo_nl@xxxxxxxxxxx
• Re: Trying to edit .profile and use nano without super user privileges
  • From: Eric.Jones
• Re: STREAM device node permission
  • From: kcnainwal@xxxxxxxxx
• Re: AIX on an as400 partition???
  • From: Jay Maynard
• Re: AIX on an as400 partition???
  • From: TomK
• SOLVED: Installing Pari, GPG, GMP, various Perl modules on AIX 5.3
  • From: usenet
• Re: AIX 4.3 install problem
  • From: Dan Foster
• Re: AIX 4.3 install problem
  • From: mizzleman
• Re: AIX on an as400 partition???
  • From: Dohhhh
• Re: Monitoring SAN with Tivoli ...
  • From: Frank Fegert
• Re: Trying to edit .profile and use nano without super user privileges
  • From: Frank Fegert
• Re: Two p570
  • From: Roman Rodionov
• Re: Monitoring SAN with Tivoli ...
  • From: Greggy
• Trying to edit .profile and use nano without super user privileges
  • From: J-Rod
• Re: Monitoring SAN with Tivoli ...
  • From: Frank Fegert
• Monitoring SAN with Tivoli ...
  • From: Greggy
• Re: STREAM device node permission
  • From: Hajo Ehlers
• Fileset size on the AIX 5.1 Documentation CD ( en_US )
  • From: Hajo Ehlers
• Re: ansicore_32.o not part of libC.a
  • From: Gary R. Hook
• Two p570
  • From: BL
• Re: SP node on house power?
  • From: Dan Foster
• SP node on house power?
  • From: The Grue - James T. Sprinkle
• Re: Upgrade H50 to AIX 5.3 won't boot from CD
  • From: robert . macnutt
• Re: Trouble with essl - PLEASE HELP
  • From: Hajo Ehlers
• Upgrade H50 to AIX 5.3 won't boot from CD
  • From: robert . macnutt
• Re: Building gd-2.0.33 on AIX 5.3
  • From: Hajo Ehlers
• Re: Help with ftp user configuration.
  • From: Hajo Ehlers
• Re: system command returns 32512
  • From: Jeff Herrick
• Help with ftp user configuration.
  • From: Lig
• Install an HP StorageWorks SDLT 320 on a p520 ?
  • From: Philippe C.
• Re: system command returns 32512
  • From: kiranhiremath
• Building gd-2.0.33 on AIX 5.3
  • From: Richard
• Re: lsof - actual files open
  • From: Victor A Abell
• Need help in memory/paging space issue jfs_use_read_lock
  • From: sohail.hasan@xxxxxxxxx
• STREAM device node permission
  • From: kcnainwal@xxxxxxxxx
• Re: A simple question
  • From: Laurenz Albe
• Re: console logging to syslog
  • From: Hajo Ehlers
• Re: users loign restrictions
  • From: Steve Greatbanks
• A simple question
  • From: rcee
• Re: AIX on an as400 partition???
  • From: Dan Foster
• Re: objdump -S doesn't shows source
  • From: Paul Pluzhnikov
• Re: console logging to syslog
  • From: peter
• Trouble with essl - PLEASE HELP
  • From: sss
• Re: * in /etc/passwd password field.
  • From: steven_nospam at Yahoo! Canada
• Re: VERITAS CLUSTER AND AIX
  • From: Dohhhh
• Re: IBM Compiler Options
  • From: Kevin Bowling
• * in /etc/passwd password field.
  • From: System Audit
• unexpected System V semaphore behavior on AIX 5.2
  • From: Terrence Sullivan
• Re: Migrate AIX 5.2ML04 to 5.3ML3: Can't find the migrate choice from the menus
  • From: ArneS
• Re: system command returns 32512
  • From: Jeff Herrick
• Re: users loign restrictions
  • From: steven_nospam at Yahoo! Canada
• Re: system command returns 32512
  • From: Laurenz Albe
• Re: system command returns 32512
  • From: Jeff Herrick
• Re: AIX on an as400 partition???
  • From: christiancolborn
• Re: system command returns 32512
  • From: kiranhiremath
• Re: Migrate AIX 5.2ML04 to 5.3ML3: Can't find the migrate choice from the menus
  • From: Greg
• Re: lsof - actual files open
  • From: Knut Hellebø
• Re: ansicore_32.o not part of libC.a
  • From: Anunay
• Re: file system serial
  • From: Mark Taylor
• Re: Unable to load library on AIX 5.2
  • From: Laurenz Albe
• Re: system command returns 32512
  • From: Laurenz Albe
• Re: system command returns 32512
  • From: kiranhiremath
• Re: users loign restrictions
  • From: Steve Greatbanks
• Re: users loign restrictions
  • From: Steve Greatbanks
• Re: IBM Compiler Options
  • From: Uli Link
• Re: Unable to load library on AIX 5.2
  • From: kcnainwal@xxxxxxxxx
• users loign restrictions
  • From: Riz
• IBM Compiler Options
  • From: Kevin Bowling
• objdump -S doesn't shows source
  • From: qasim.zaidi@xxxxxxxxx
• Re: 7044-170 AIX install problem
  • From: Randy HR Tsang
• Re: 7044-170 AIX install problem
  • From: Randy HR Tsang
• Re: AIX on an as400 partition???
  • From: zyzygy
• Re: console logging to syslog
  • From: 0xbeef
• Re: Migrate AIX 5.2ML04 to 5.3ML3: Can't find the migrate choice from the menus
  • From: 0xbeef
• Re: ansicore_32.o not part of libC.a
  • From: Paul Pluzhnikov
• Re: Migrate AIX 5.2ML04 to 5.3ML3: Can't find the migrate choice from the menus
  • From: Dan Foster
• Migrate AIX 5.2ML04 to 5.3ML3: Can't find the migrate choice from the menus
  • From: ArneS
• ansicore_32.o not part of libC.a
  • From: mrussak
• HACMP and application server
  • From: Friedhelm Neyer
• Re: console logging to syslog
  • From: peter
• Re: console logging to syslog
  • From: Hajo Ehlers
• Re: VERITAS CLUSTER AND AIX
  • From: takarov2003
• Re: console logging to syslog
  • From: peter
• VERITAS CLUSTER AND AIX
  • From: jackit
• Re: Unable to load library on AIX 5.2
  • From: Paul Pluzhnikov
• Unable to load library on AIX 5.2
  • From: Vij
• Re: console logging to syslog
  • From: Steve Greatbanks
• Re: AIX on an as400 partition???
  • From: Dan Foster
• Re: device packages?!?
  • From: Roman Rodionov
• Re: AIX on an as400 partition???
  • From: Roman Rodionov
• Re: file system serial
  • From: Roman Rodionov
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Roman Rodionov
• AIX on an as400 partition???
  • From: cc
• Re: 7044-170 AIX install problem
  • From: Roman Rodionov
• Re: system command returns 32512
  • From: Jeff Herrick
• Re: trouble with serial console access to p630
  • From: Don
• Re: gigabit adapters for a 7025-f80
  • From: Dan Foster
• Re: console logging to syslog
  • From: Wil Cooley
• gigabit adapters for a 7025-f80
  • From: bob
• Re: system command returns 32512
  • From: Jeff Herrick
• Re: the importance of FIRMWARE(?!?!)
  • From: cc
• Re: system command returns 32512
  • From: Laurenz Albe
• Re: file system serial
  • From: Mark Taylor
• Re: system command returns 32512
  • From: Jeff Herrick
• Re: 7044-170 AIX install problem
  • From: Dave
• PAM under AIX 5.2 problem
  • From: repas
• console logging to syslog
  • From: peter
• NSS_LDAP and AIX 5.1
  • From: Patrick Begou
• Re: admin = true
  • From: Ted Linnell
• Re: system command returns 32512
  • From: Laurenz Albe
• Re: libptools_ptr.a missing - RSA Authentication Server ACE
  • From: Hajo Ehlers
• Re: User audit trails
  • From: rcee
• Re: the importance of FIRMWARE(?!?!)
  • From: Frank Fegert
• Re: Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
  • From: Frank Fegert
• Re: system command returns 32512
  • From: kiranhiremath
• Re: the importance of FIRMWARE(?!?!)
  • From: No Body
• Re: 7044-170 AIX install problem
  • From: Randy HR Tsang
• Re: AIX 4.1./RS6000 boot hang, help requested.
  • From: Chris
• libptools_ptr.a missing - RSA Authentication Server ACE
  • From: John
• Re: aix5.2
  • From: base60
• Re: AIX 4.3 install problem
  • From: Dan Foster
• Re: AIX 4.3 install problem
  • From: mizzleman
• Re: AIX 4.3 install problem
  • From: mizzleman
• (OT) Re: the importance of FIRMWARE(?!?!)
  • From: Hajo Ehlers
• Re: the importance of FIRMWARE(?!?!)
  • From: Dan Foster
• Re: the importance of FIRMWARE(?!?!)
  • From: cc
• Re: device packages?!?
  • From: Dan Foster
• Re: 7044-170 AIX install problem
  • From: Roman Rodionov
• Re: the importance of FIRMWARE(?!?!)
  • From: Hajo Ehlers
• Re: SCAN_ERROR_CHRP Resource Name: sysplanar0
  • From: Roman Rodionov
• Re: Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
  • From: cc
• Re: p520, hmc, kvm
  • From: cc
• the importance of FIRMWARE(?!?!)
  • From: cc
• Re: device packages?!?
  • From: cc
• Re: Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
  • From: Dave
• Re: CDE fails on Xserver
  • From: Roman Rodionov
• Re: AIX 4.3 install problem
  • From: Dan Foster
• p520, hmc, kvm
  • From: Isaac Traxler
• Re: AIX 4.3 install problem
  • From: Dan Foster
• Re: AIX 4.3 install problem
  • From: Dan Foster
• Re: AIX 4.3 install problem
  • From: mizzleman
• Re: returning value from dbx
  • From: Gary R. Hook
• Re: AIX as openldap client
  • From: Patrick Begou
• Re: system command returns 32512
  • From: Dan Foster
• Re: device packages?!?
  • From: cc
• Re: system command returns 32512
  • From: kiranhiremath
• Re: 32 bits powerpc lsof binary for AIX 5.3
  • From: JeffryAWilson@xxxxxxxxx
• Re: system command returns 32512
  • From: Dan Foster
• Re: system command returns 32512
  • From: kiranhiremath
• Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
  • From: prsanwal@xxxxxxxxx
• Re: system command returns 32512
  • From: Dan Foster
• system command returns 32512
  • From: kiranhiremath
• Re: returning value from dbx
  • From: Mark Taylor
• Re: aix5.2
  • From: Hajo Ehlers
• Re: aix5.2
  • From: Patrick Begou
• Re: device packages?!?
  • From: Dan Foster
• aix5.2
  • From: s2s Paris
• Re: AIX as openldap client
  • From: Patrick Begou
• Re: device packages?!?
  • From: Hajo Ehlers
• Re: Python 2.4.2 on AIX 5.1 build with xlc
  • From: Hajo Ehlers
• Re: device packages?!?
  • From: Dan Foster
• Re: admin = true
  • From: Laurenz Albe
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Hajo Ehlers
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Dan Foster
• Re: returning value from dbx
  • From: anoop . vijayan
• Re: SAN disks, tape and FC Adapters
  • From: Al Barth
• Re: 7044-170 AIX install problem
  • From: Randy HR Tsang
• Re: aix 5.3ml02 can't umount filesystem
  • From: liming
• Re: AIX as openldap client
  • From: Gary Tay Teng Teck
• Re: device packages?!?
  • From: cc
• Re: device packages?!?
  • From: Hajo Ehlers
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: cc
• Re: device packages?!?
  • From: mm
• Re: device packages?!?
  • From: aixdude
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: Hajo Ehlers
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: cc
• Re: device packages?!?
  • From: cc
• Re: device packages?!?
  • From: Hajo Ehlers
• Re: AIX as openldap client
  • From: Erik C.J. Laan
• Re: device packages?!?
  • From: Dan Foster
• Re: AIX as openldap client
  • From: repas
• Re: device packages?!?
  • From: cc
• Re: Basic question about redirecting output
  • From: BD
• Re: strange error in aix5.3??
  • From: David Rye
• Re: Basic question about redirecting output
  • From: sol gongola
• Re: Non Blocking Connect/Select AIX 4.2+
  • From: David Rye
• Basic question about redirecting output
  • From: BD
• Re: device packages?!? (installing fibre-channel cards)
  • From: Hajo Ehlers
• Non Blocking Connect/Select AIX 4.2+
  • From: David Rye
• admin = true
  • From: System Audit
• Re: device packages?!?
  • From: cc
• Re: device packages?!? (installing fibre-channel cards)
  • From: David Rye
• AIX as openldap client
  • From: Patrick Begou
• Re: device packages?!?
  • From: Dan Foster
• Re: device packages?!?
  • From: cc
• Re: Correct usage of RTLD_GLOBAL flag?
  • From: Gary R. Hook
• Re: device packages?!?
  • From: Dan Foster
• Re: Usage of RTLD_GLOBAL with -brtl
  • From: Gary R. Hook
• Re: strange error in aix5.3??
  • From: Dan Foster
• Re: Anyone doing SEA failover?
  • From: Wil Cooley
• Re: returning value from dbx
  • From: Gary R. Hook
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Gary R. Hook
• device packages?!? (installing fibre-channel cards)
  • From: cc
• device packages?!?
  • From: cc
• strange error in aix5.3??
  • From: rs6000er
• What does odm database error mean
  • From: d'Jonz'Z
• User audit trails
  • From: Knut Hellebø
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Anunay
• Re: AIX 4.3 install problem
  • From: mizzleman
• Re: 7044-170 AIX install problem
  • From: steven_nospam at Yahoo! Canada
• Re: 32 bits powerpc lsof binary for AIX 5.3
  • From: abe
• Re: How to grant NFS mounting permission to a basic user
  • From: gniagnia
• can not mkvg for concurrent
  • From: golfyacoolza
• 32 bits powerpc lsof binary for AIX 5.3
  • From: grostoon
• 7044-170 AIX install problem
  • From: Randy HR Tsang
• Re: AIX Os emulation
  • From: Mark Taylor
• Re: How to grant NFS mounting permission to a basic user
  • From: Mark Taylor
• How to grant NFS mounting permission to a basic user
  • From: gniagnia
• returning value from dbx
  • From: anoop . vijayan
• Re: AIX 4.3 install problem
  • From: rcee
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Paul Pluzhnikov
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Paul Pluzhnikov
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Anunay
• AIX Os emulation
  • From: fox
• Re: quorum question
  • From: rancid moth
• Re: SAN disks, tape and FC Adapters
  • From: TomK
• Re: quorum question
  • From: Dan Foster
• Re: quorum question
  • From: rancid moth
• Re: Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Gary R. Hook
• AIX 4.3 install problem
  • From: mizzleman
• Re: trouble with serial console access to p630
  • From: Don
• Re: HACMP5.1 node priority
  • From: Patrick
• Re: AIX media purchase
  • From: Dave
• Re: AIX media purchase
  • From: Michael W. Ryder
• Re: Correct usage of RTLD_GLOBAL flag?
  • From: Paul Pluzhnikov
• AIX media purchase
  • From: nicklebon
• Re: vios and powerpath
  • From: Swen Jung
• Re: HACMP5.1 node priority
  • From: Sandeep
• Re: SCAN_ERROR_CHRP Resource Name: sysplanar0
  • From: Dan Foster
• Re: SCAN_ERROR_CHRP Resource Name: sysplanar0
  • From: danm@xxxxxxxxxxxxxxxxx
• Re: SCAN_ERROR_CHRP Resource Name: sysplanar0
  • From: Dan Foster
• SCAN_ERROR_CHRP Resource Name: sysplanar0
  • From: danm@xxxxxxxxxxxxxxxxx
• Re: cfgmrgr unknown error ( Addendum )
  • From: Hajo Ehlers
• Re: SAN disks, tape and FC Adapters
  • From: Hajo Ehlers
• Re: cfgmrgr unknown error
  • From: Hajo Ehlers
• Re: SAN disks, tape and FC Adapters
  • From: tlowrie@xxxxxxxxx
• Re: Remote execution of commands on AIX
  • From: Mike
• Re: Migrating 3590 to 3592 in 3494 and TSM
  • From: Steven
• Re: AIX runtime problem
  • From: hem
• cfgmrgr unknown error
  • From: Riz
• Re: AIX runtime problem
  • From: Uli Link
• Symbols not exported by ansi_32.o in AIX 5.1 only
  • From: Anunay
• Re: Correct usage of RTLD_GLOBAL flag?
  • From: Anunay
• Re: AIX runtime problem
  • From: hem
• Re: AIX runtime problem
  • From: hem
• HACMP5.1 node priority
  • From: Ajay
• Re: Remote execution of commands on AIX
  • From: Larry Starr
• Remote execution of commands on AIX
  • From: vidhs157
• Remote execution of commands on AIX
  • From: vidhs157
• Re: aix 5.3ml02 can't umount filesystem
  • From: pmalenfa
• Re: quorum question
  • From: Dan Foster
• quorum question
  • From: rancid moth
• Applying ML Updates to NIM SPOT/LPPsource
  • From: cdwells
• Re: mksysb too big
  • From: Mike
• Re: What does "ss_wr_net: Bad file number" mean?
  • From: Hajo Ehlers
• Re: SAN disks, tape and FC Adapters
  • From: Steve Greatbanks
• Re: SAN disks, tape and FC Adapters
  • From: Hajo Ehlers
• Converting Oracle9RAC and raw device to Oracle10G and GPFS
  • From: ArneS
• Re: SAN disks, tape and FC Adapters
  • From: Steve Greatbanks
• Re: LVM Error
  • From: praveen
• Re: SAN disks, tape and FC Adapters
  • From: Dan Foster
• Re: Warnings when running perl
  • From: aix
• Re: xmperf and missing font
  • From: Patrick
• Re: SAN disks, tape and FC Adapters
  • From: tlowrie@xxxxxxxxx
• Re: mksysb too big
  • From: Dan Foster
• xmperf and missing font
  • From: Patrick
• Re: mksysb too big
  • From: Patrick
• Re: LVM Error
  • From: solguy
• Re: SAN disks, tape and FC Adapters
  • From: Dan Foster
• MIgrating resources btw LAPRs
  • From: praveen
• SAN disks, tape and FC Adapters
  • From: tlowrie@xxxxxxxxx
• Re: Anyone doing SEA failover?
  • From: Wil Cooley
• LVM Error
  • From: praveen
• Re: Connection failure between VIO server and HMC
  • From: Wil Cooley
• DMV Databases?
  • From: as400
• Re: perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3?
  • From: Dan Foster
• Re: AIX runtime problem
  • From: Paul Pluzhnikov
• What does "ss_wr_net: Bad file number" mean?
  • From: rsine
• Re: Correct usage of RTLD_GLOBAL flag?
  • From: Paul Pluzhnikov
• FS: IBM 7133-T40 parts & IBM 44P-270s/7044-270
  • From: mfinley1
• Re: perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3?
  • From: Friedhelm Neyer
• Re: Connection failure between VIO server and HMC
  • From: epacket
• Re: Connection failure between VIO server and HMC
  • From: day88
• Re: aix 5.3ml02 can't umount filesystem
  • From: Mark Taylor
• Re: gpfs fs mount order
  • From: Henry T.
• Re: Need a scsi card for a EServer - P550
  • From: Hajo Ehlers
• Re: gpfs fs mount order
  • From: Hajo Ehlers
• Re: semaphores on AIX
  • From: Laurenz Albe
• Re: mksysb too big
  • From: Kristo
• Re: AIX runtime problem
  • From: hem
• Re: AIX runtime problem
  • From: Dan Foster
• AIX runtime problem
  • From: hem
• semaphores on AIX
  • From: rcee
• Correct usage of RTLD_GLOBAL flag?
  • From: Anunay
• perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3?
  • From: Dan Foster
• Warnings when running perl
  • From: MoshiachNow
• Re: gpfs fs mount order
  • From: Henry T.
• SUMA and FTP issue
  • From: Dan Foster
• Re: Need a scsi card for a EServer - P550
  • From: Chris
• Need a scsi card for a EServer - P550
  • From: Chris
• Re: mksysb too big
  • From: jthomp1515
• Re: Migrate SP nodes to p570
  • From: Hajo Ehlers
• Re: How to programmatically set EXTSHM=ON for shmat()
  • From: gregn2211
• Re: Sudden problem with apache and mod_jk
  • From: kurt . bremser
• Migrate SP nodes to p570
  • From: bjdboyer
• Re: Tivoli TSM Backup/Restore question
  • From: Dohhhh
• CDE fails on Xserver
  • From: Riz
• Re: Sudden problem with apache and mod_jk
  • From: Frank Fegert
• Re: Help on Porting to Linux
  • From: Lorinczy Zsigmond
• aix 5.3ml02 can't umount filesystem
  • From: liming
• Re: Tivoli TSM Backup/Restore question
  • From: Jurjen Oskam
• Re: lsof - actual files open
  • From: Dohhhh
• Re: no power to cdrom on new pseries
  • From: Dohhhh
• Re: console into a p630???
  • From: Dohhhh
• Re: Model type and serial number in AIX 4.1.*
  • From: Dohhhh
• Re: Tivoli TSM Backup/Restore question
  • From: Dohhhh
• Re: trouble with serial console access to p630
  • From: pmalenfa
• Re: mksysb too big
  • From: pmalenfa
• Re: Anyone doing SEA failover?
  • From: epacket
• Re: mksysb too big
  • From: praveen
• Anyone doing SEA failover?
  • From: Wil Cooley
• Re: trouble with serial console access to p630
  • From: Don
• mksysb too big
  • From: Mike
• Re: trouble with serial console access to p630
  • From: steven_nospam at Yahoo! Canada
• trouble with serial console access to p630
  • From: Don
• Re: hscroot password for DS 8000 HMC
  • From: Nimal ABHAYA
• Re: Help on Porting to Linux
  • From: Gary R. Hook
• Re: LPAR setup recommendation
  • From: Hajo Ehlers
• Re: gpfs fs mount order
  • From: Hajo Ehlers
• Re: lsof - actual files open
  • From: rmdashrsplat
• Re: hscroot password for DS 8000 HMC
  • From: vlad . zam
• gpfs fs mount order
  • From: Henry T.
• Usage of RTLD_GLOBAL with -brtl
  • From: Anunay
• Re: LPAR setup recommendation
  • From: Steve Greatbanks
• Re: how to get openssh for aix
  • From: Darren Tucker
• Re: LPAR setup recommendation
  • From: Steve Greatbanks
• Re: how to get openssh for aix
  • From: Kristo
• Re: how to get openssh for aix
  • From: Kristo
• Re: "traveling" crontab
  • From: Ted Linnell
• Re: LPAR setup recommendation
  • From: Steve Greatbanks
• Re: LPAR setup recommendation
  • From: Hajo Ehlers
• Re: LPAR setup recommendation
  • From: Steve Greatbanks
• Re: how to get openssh for aix
  • From: Darren Tucker
• LPAR setup recommendation
  • From: John
• Re: how to get openssh for aix
  • From: Wil Cooley
• Re: "A loss of redundancy on input power was detected"
  • From: christiancolborn
• Re: p5 server differences?
  • From: Mike
• hscroot password for DS 8000 HMC
  • From: Nimal ABHAYA
• Re: p5 server differences?
  • From: Steve Greatbanks
• p5 server differences?
  • From: Mike
• Re: Is it Ok to kill rcp.ttdbserver?
  • From: Eric
• Re: "A loss of redundancy on input power was detected"
  • From: Dan Foster
• Re: "A loss of redundancy on input power was detected"
  • From: Hajo Ehlers
• Re: "A loss of redundancy on input power was detected"
  • From: christiancolborn
• Re: "A loss of redundancy on input power was detected"
  • From: christiancolborn
• Re: console into a p630???
  • From: prichard
• Re: invalid char ptr on AIX
  • From: Briantb
• Re: "A loss of redundancy on input power was detected"
  • From: aixdude
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: BD
• Re: "A loss of redundancy on input power was detected"
  • From: Dan Foster
• Re: "A loss of redundancy on input power was detected"
  • From: Dan Foster
• Re: "A loss of redundancy on input power was detected"
  • From: Dan Foster
• Re: Bull's Samba 3.0.4.0 AIX 4.3.binary does not work?
  • From: stevue
• "A loss of redundancy on input power was detected"
  • From: christiancolborn
• Re: Same print queue with different printer configured
  • From: alvintsh
• Re: Nmon don't show all fcs adapters
  • From: patux
• SHAREWARE: txt2pdf 8.5
  • From: mail
• Re: lsof - actual files open
  • From: Mike
• Re: Same print queue with different printer configured
  • From: steven_nospam at Yahoo! Canada
• Re: Same print queue with different printer configured
  • From: laixsoft
• Same print queue with different printer configured
  • From: alvintsh
• Re: lsof - actual files open
  • From: Herbert Groot Jebbink
• Is it Ok to kill rcp.ttdbserver?
  • From: Adrian Davis
• Re: lsof - actual files open
  • From: Mike
• Re: Nmon don't show all fcs adapters
  • From: Mark Taylor
• lsof - actual files open
  • From: Herbert Groot Jebbink
• Re: AIX 4.1./RS6000 boot hang, help requested.
  • From: Jerald H. Mathews
• Re: set program resources
  • From: Hajo Ehlers
• set program resources
  • From: Marco
• Re: "traveling" crontab
  • From: pmalenfa
• Re: NCR command uselib AIX equivalent
  • From: Gary R. Hook
• Re: How to programmatically set EXTSHM=ON for shmat()
  • From: Gary R. Hook
• Re: AIX 4.1./RS6000 boot hang, help requested.
  • From: Chris
• operator overloading for ostream in g++
  • From: Matrix
• Re: Help on Porting to Linux
  • From: Matrix
• Re: chpasswd command - where is it?
  • From: dhack
• Re: chpasswd command - where is it?
  • From: dhack
• Re: chpasswd command - where is it?
  • From: steven_nospam at Yahoo! Canada
• chpasswd command - where is it?
  • From: dhack
• Nmon don't show all fcs adapters
  • From: patux
• Re: console into a p630???
  • From: Darrell Frappier
• Connection failure between VIO server and HMC
  • From: Wil Cooley
• Re: no power to cdrom on new pseries
  • From: Dave
• Re: Help on Porting to Linux
  • From: Paul Pluzhnikov
• Re: Tivoli TSM Backup/Restore question
  • From: nospam
• Re: console into a p630???
  • From: Jerald H. Mathews
• Build Apache 2.0.55 on AIX 5.1 with vac V6
  • From: Hajo Ehlers
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: steven_nospam at Yahoo! Canada
• Help on Porting to Linux
  • From: Matrix
• Re: console into a p630???
  • From: cc
• no power to cdrom on new pseries
  • From: cc
• Re: console into a p630???
  • From: Jerald H. Mathews
• console into a p630???
  • From: cc
• Re: Model type and serial number in AIX 4.1.*
  • From: Hajo Ehlers
• Re: Does VIO server support raw device
  • From: Mark Taylor
• Re: Model type and serial number in AIX 4.1.*
  • From: Dave
• vios and powerpath
  • From: pvb265
• Re: AIX 4.1./RS6000 boot hang, help requested.
  • From: Jerald H. Mathews
• Re: Model type and serial number in AIX 4.1.*
  • From: Ajay
• Re: Model type and serial number in AIX 4.1.*
  • From: Dan Foster
• Model type and serial number in AIX 4.1.*
  • From: Ajay
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: Laurenz Albe
• Re: jfs2 in 32-bit kernel?
  • From: Steve Greatbanks
• AIX 4.1./RS6000 boot hang, help requested.
  • From: Chris
• Re: jfs2 in 32-bit kernel?
  • From: No Body
• Re: Tivoli TSM Backup/Restore question
  • From: Jurjen Oskam
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: BD
• Re: Completely removing HACMP 5.2
  • From: Patrick
• Re: Migrating 3590 to 3592 in 3494 and TSM
  • From: hunter . zhough
• Re: Completely removing HACMP 5.2
  • From: Dave
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: steven_nospam at Yahoo! Canada
• Tivoli TSM Backup/Restore question
  • From: nospam
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: BD
• Re: Completely removing HACMP 5.2
  • From: Patrick
• Re: Does VIO server support raw device
  • From: vlad . zam
• Completely removing HACMP 5.2
  • From: user
• Re: Migrating 3590 to 3592 in 3494 and TSM
  • From: Hajo Ehlers
• Re: IBM7318-S20 and serial barcode scanner data capture
  • From: laixsoft
• Re: Deleting password for a user
  • From: Ravindra
• SystemV Printer Problems
  • From: jdmash55
• Re: Does VIO server support raw device
  • From: linyy_ca
• Re: Oracle Forms on AIX
  • From: Jeff Herrick
• NCR command uselib AIX equivalent
  • From: authxsp
• Re: Deleting password for a user
  • From: vlad . zam
• Re: Migrating 3590 to 3592 in 3494 and TSM
  • From: hunter . zhough
• Re: vSCSI mapping
  • From: vlad . zam
• Re: IBM7318-S20 and serial barcode scanner data capture
  • From: Doug B>)
• Re: Does VIO server support raw device
  • From: Mark Taylor
• Re: Does VIO server support raw device
  • From: Mark Taylor
• Re: FYI: Building various GPL Stuff on AIX
  • From: Hajo Ehlers
• Re: FYI: Building various GPL Stuff on AIX
  • From: Kevin Bowling
• Re: 7013-590 and Etherstreamer MC/32: supported on 4.3.3?
  • From: Kevin Bowling
• How to programmatically set EXTSHM=ON for shmat()
  • From: gregn2211
• Re: Deleting password for a user
  • From: Ravindra
• vSCSI mapping
  • From: linyy_ca
• Does VIO server support raw device
  • From: linyy_ca
• Re: Migrating 3590 to 3592 in 3494 and TSM
  • From: Hajo Ehlers
• Re: "traveling" crontab
  • From: Patrick
• Re: jfs2 in 32-bit kernel?
  • From: rs6000er
• aix 5.3 performance tuning??
  • From: rs6000er
• Migrating 3590 to 3592 in 3494 and TSM
  • From: hunter . zhough
• Python 2.4.2 on AIX 5.1 build with xlc
  • From: Hajo Ehlers
• Re: FYI: Building various GPL Stuff on AIX
  • From: Hajo Ehlers
• FYI: Building various GPL Stuff on AIX
  • From: Hajo Ehlers
• Re: Oracle Forms on AIX
  • From: Mark Taylor
• Re: paging strategy
  • From: Mark Taylor
• Re: Deleting password for a user
  • From: steven_nospam at Yahoo! Canada
• OT: newsreagder/server settings [was: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!]
  • From: Frank Fegert
• Deleting password for a user
  • From: Ravindra
• Oracle Forms on AIX
  • From: rehorst@xxxxxxxx
• Re: IBM7318-S20 and serial barcode scanner data capture
  • From: steven_nospam at Yahoo! Canada
• Re: "traveling" crontab
  • From: Peter Much
• Re: paging strategy
  • From: Peter Much
• Re: IBM7318-S20 and serial barcode scanner data capture
  • From: laixsoft
• IBM 7318-S20 and Symbol barcode scanner data capture
  • From: Doug B>)
• IBM7318-S20 and serial barcode scanner data capture
  • From: Doug B>)
• Re: jfs2 in 32-bit kernel?
  • From: Hajo Ehlers
• Re: jfs2 in 32-bit kernel?
  • From: Mark Taylor
• Re: jfs2 in 32-bit kernel?
  • From: Steve Greatbanks
• Re: jfs2 in 32-bit kernel?
  • From: Steve Greatbanks
• Re: Checking xlc compiler installation on AIX 5L
  • From: Patrick Begou
• dlopen problem
  • From: Anunay
• dlopen problem
  • From: Anunay
• Re: Command is respawning too rapidly
  • From: Jurjen Oskam
• Re: long user name support in AIX 5.2?
  • From: Steve Greatbanks
• Re: 7013-590 and Etherstreamer MC/32: supported on 4.3.3?
  • From: Uli Link
• Re: long user name support in AIX 5.2?
  • From: Philippe C.
• Command is respawning too rapidly
  • From: Chris
• Re: paging strategy
  • From: base60
• 7013-590 and Etherstreamer MC/32: supported on 4.3.3?
  • From: Jay Maynard
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: rootvg not varied on
  • From: Mark Taylor
• Re: rootvg not varied on
  • From: gertk
• Re: jfs2 in 32-bit kernel?
  • From: rs6000er
• Re: jfs2 in 32-bit kernel?
  • From: rs6000er
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: long user name support in AIX 5.2?
  • From: kevinm3574
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: paging strategy
  • From: Frank Fegert
• Re: "traveling" crontab
  • From: Unused1980
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Unused1980
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: "traveling" crontab
  • From: Unused1980
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Frank Fegert
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Frank Fegert
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: rootvg not varied on
  • From: Pawel
• Re: rootvg not varied on
  • From: Pawel
• Re: rootvg not varied on
  • From: Pawel
• Re: rootvg not varied on
  • From: Pawel
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Jurjen Oskam
• Re: HAMCP and passwd
  • From: Pawel
• Re: root scp with no ssh login
  • From: Pawel
• Re: downloading bos.adt.libm
  • From: Hajo Ehlers
• Re: paging strategy
  • From: Hajo Ehlers
• Re: h80 32 bit to 64 bit on AIX 5.1
  • From: Dan Foster
• Re: h80 32 bit to 64 bit on AIX 5.1
  • From: Patrick
• Re: "traveling" crontab
  • From: Patrick
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Frank Fegert
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: SVMon broken!!?!!?
  • From: Jurjen Oskam
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Jurjen Oskam
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Jurjen Oskam
• Re: long user name support in AIX 5.2?
  • From: Steve Greatbanks
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Kevin Bowling
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: Steve Greatbanks
• Re: paging strategy
  • From: Steve Greatbanks
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Rick Jones
• Re: Checking xlc compiler installation on AIX 5L
  • From: vxdiskadm
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• long user name support in AIX 5.2?
  • From: kevinm3574
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: paging strategy
  • From: Steve Greatbanks
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Frank Fegert
• SVMon broken!!?!!?
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: aix 5.3 on 7026-H80?
  • From: Mike
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Rick Jones
• Re: aix 5.3 on 7026-H80?
  • From: Steve Greatbanks
• Re: aix 5.3 on 7026-H80?
  • From: Frank Fegert
• Re: aix 5.3 on 7026-H80?
  • From: praveen
• Re: aix 5.3 on 7026-H80?
  • From: Mike
• Re: aix 5.3 on 7026-H80?
  • From: Frank Fegert
• aix 5.3 on 7026-H80?
  • From: Mike
• Re: "traveling" crontab
  • From: jthomp1515
• Re: determining if an executable is 64-bit
  • From: Gary R. Hook
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: steven_nospam at Yahoo! Canada
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Jurjen Oskam
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: Downloading file from remote server to local drive
  • From: gai
• Re: Downloading file from remote server to local drive
  • From: gai
• Re: procfs mount hangs 5L diskless system
  • From: lcaamano
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Michael Kraemer
• Re: rootvg not varied on
  • From: Mark Taylor
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Jurjen Oskam
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Michael Kraemer
• Re: Checking xlc compiler installation on AIX 5L
  • From: Jurjen Oskam
• Re: rootvg not varied on
  • From: Mark Taylor
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: mikescollan
• downloading bos.adt.libm
  • From: rynox
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: paging strategy
  • From: Frank Fegert
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Mark Taylor
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Mark Taylor
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Mark Taylor
• Re: Checking xlc compiler installation on AIX 5L
  • From: Anunay
• ?? Can I plug an USB DVD-Recoderd on a pSeries 5XX ??
  • From: Philippe C.
• invalid char ptr
  • From: Viru
• Re: Checking xlc compiler installation on AIX 5L
  • From: Patrick Begou
• Solution of slow compilation on AIX is here
  • From: Viru
• Re: Is DBX available for AIX 5.2 ?
  • From: Anunay
• invalid char ptr on AIX
  • From: Viru
• Re: Checking xlc compiler installation on AIX 5L
  • From: Anunay
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• NAS 300 user permissions
  • From: Rav
• Re: "traveling" crontab
  • From: Ted Linnell
• Re: paging strategy
  • From: Ted Linnell
• Re: paging strategy
  • From: base60
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• Re: Checking xlc compiler installation on AIX 5L
  • From: Unused1980
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Hajo Ehlers
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• h80 32 bit to 64 bit on AIX 5.1
  • From: John Yard
• Re: "traveling" crontab
  • From: Hajo Ehlers
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: paging strategy
  • From: Hajo Ehlers
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: Error says: 0403-059 There cannot be more than 9 levels of recursion
  • From: base60
• Re: paging strategy
  • From: base60
• Re: MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: Dan Foster
• MAssive Performance hit after AIX 4.3 -> 5.2 upgrade!!
  • From: christiancolborn
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: christiancolborn
• Re: "traveling" crontab
  • From: Patrick
• Re: determining if an executable is 64-bit
  • From: jthomp1515
• Re: paging strategy
  • From: Frank Fegert
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: Frank Fegert
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: Steve Greatbanks
• Re: jfs2 in 32-bit kernel?
  • From: Steve Greatbanks
• Re: determining if an executable is 64-bit
  • From: Patrick
• "traveling" crontab
  • From: Patrick
• Re: Need help recovering data from gtar tape
  • From: sllabres
• Re: read write mount of a snapshot logical volume - HP-UX.
  • From: Unused1980
• determining if an executable is 64-bit
  • From: Brad
• Re: rootvg not varied on
  • From: jthomp1515
• Re: QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: steven_nospam at Yahoo! Canada
• Re: activate mailx in AIX 5.2
  • From: Unused1980
• Re: activate mailx in AIX 5.2
  • From: saam
• Re: activate mailx in AIX 5.2
  • From: Unused1980
• QUESTION: Crontab syntax for "Second Sunday in a month"
  • From: BD
• Re: Downloading file from remote server to local drive
  • From: saam
• Re: AIX: Symbol xdr_sizeof, __rpc_createerr were not found
  • From: Gary R. Hook
• Re: Need help recovering data from gtar tape
  • From: Mark Taylor
• Re: Checking xlc compiler installation on AIX 5L
  • From: Gary R. Hook
• Re: Downloading file from remote server to local drive
  • From: Hajo Ehlers
• activate mailx in AIX 5.2
  • From: saam
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: gertk
• Re: How do you determine if AIX has multithreading enabled? What happpens if u try to load a multhrithreaded library using dlopen() and OS does not support it?
  • From: Gary R. Hook
• Re: Is DBX available for AIX 5.2 ?
  • From: Gary R. Hook
• Re: jfs2 in 32-bit kernel?
  • From: rs6000er
• Re: Read access to files
  • From: Tom
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: praveen
• Re: Checking xlc compiler installation on AIX 5L
  • From: aix
• Re: Checking xlc compiler installation on AIX 5L
  • From: Anunay
• Re: installing oracle 8i client on aix 5.3
  • From: Pete's
• read write mount of a snapshot logical volume - HP-UX.
  • From: Gary Bond
• Re: Read access to files
  • From: praveen
• Re: installing oracle 8i client on aix 5.3
  • From: tmpolzin
• Re: rootvg not varied on
  • From: gertk
• Downloading file from remote server to local drive
  • From: gai
• Re: rootvg not varied on
  • From: aix
• Re: Checking xlc compiler installation on AIX 5L
  • From: aix
• installing oracle 8i client on aix 5.3
  • From: rynox
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: praveen
• Re: is there an equivalent to slices on aix and how to mount.
  • From: vlad . zam
• Re: Boot a server from a SPOT image on a DVD using NIM ?
  • From: vlad . zam
• Read access to files
  • From: Tom
• Boot a server from a SPOT image on a DVD using NIM ?
  • From: Philippe C.
• Re: Error says: 0403-059 There cannot be more than 9 levels of recursion
  • From: Ravindra
• Error says: 0403-059 There cannot be more than 9 levels of recursion
  • From: Ravindra
• Checking xlc compiler installation on AIX 5L
  • From: Anunay
• Re: jfs2 in 32-bit kernel?
  • From: Steve Greatbanks
• Re: rootvg not varied on
  • From: Kristo
• Re: paging strategy
  • From: rachik
• Re: NIM SPOT not okay - missing network boot image
  • From: sgeigenmueller
• Re: NFS directory not found on AIX 4.3 nfs-client
  • From: Knut Rauscher
• Re: jfs2 in 32-bit kernel?
  • From: rcee
• Re: paging strategy
  • From: rcee
• Re: is there an equivalent to slices on aix and how to mount.
  • From: zyzygy
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: Need help recovering data from gtar tape
  • From: Paul Pluzhnikov
• Re: tar recovery needed
  • From: Paul Pluzhnikov
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: gertk
• Re: rootvg not varied on
  • From: gertk
• Re: HACMP: Group Services ,Error in writing to log file.
  • From: Frank Fegert
• Re: rootvg not varied on
  • From: praveen
• Re: strings command
  • From: hubcap
• HACMP: Group Services ,Error in writing to log file.
  • From: praveen
• Re: Sendmail core dumping
  • From: praveen
• Re: Big directories & performance
  • From: Steve Greatbanks
• Need help recovering data from gtar tape
  • From: Anthony.Weber@xxxxxxxxxxx
• Re: strings command
  • From: aix
• Re: Sendmail core dumping
  • From: Dan Foster
• rootvg not varied on
  • From: gertk
• jfs2 in 32-bit kernel?
  • From: rs6000er
• Re: is there an equivalent to slices on aix and how to mount.
  • From: Jurjen Oskam
• Re: Check if user can access a specific file.
  • From: Jurjen Oskam
• Re: Big directories & performance
  • From: Jurjen Oskam
• Re: strings command
  • From: praveen
• Sendmail core dumping
  • From: praveen
• Re: Automatic Completion
  • From: artinghan
• Re: 4.3.3 FTP Issue
  • From: Bob Clark
• Re: Big directories & performance
  • From: steven_nospam at Yahoo! Canada
• Re: Big directories & performance
  • From: Mark Taylor
• Found 452 AIX jobs
  • From: JobVolume.com
• Re: nmon 10 segmentation fault
  • From: rossdruker
• Re: NFS directory not found on AIX 4.3 nfs-client
  • From: lcaamano
• Re: NIM SPOT not okay - missing network boot image
  • From: lcaamano
• Re: strings command
  • From: hubcap
• NIM SPOT not okay - missing network boot image
  • From: sgeigenmueller
• Re: Automatic Completion
  • From: Naresh
• Re: strings command
  • From: aix
• Re: Big directories & performance
  • From: stevem
• How do you determine if AIX has multithreading enabled? What happpens if u try to load a multhrithreaded library using dlopen() and OS does not support it?
  • From: harshanand . nayak
• Re: Big directories & performance
  • From: Mark Taylor
• Re: Big directories & performance
  • From: steven_nospam at Yahoo! Canada
• Re: Check if user can access a specific file.
  • From: hunter . zhough
• Re: is there an equivalent to slices on aix and how to mount.
  • From: Jurjen Oskam
• Re: paging strategy
  • From: Mark Taylor
• Big directories & performance
  • From: stevem
• Re: tar recovery needed
  • From: rmwindows
• Re: part numbers for model 7043-150
  • From: Andreas Schulze
• Re: Check if user can access a specific file.
  • From: rmwindows
• NFS directory not found on AIX 4.3 nfs-client
  • From: Knut Rauscher
• Re: 4.3.3 FTP Issue
  • From: rmwindows
• Re: strings command
  • From: Nicholas Buckley
• Re: paging strategy
  • From: Frank Fegert
• tar recovery needed
  • From: fondue.meat
• Re: strings command
  • From: Paul Pluzhnikov
• Re: paging strategy
  • From: Dan Foster
• Re: source based routing in AIX
  • From: rakeshson@xxxxxxxxx
• Re: paging strategy
  • From: base60
• Re: paging strategy
  • From: base60
• Re: source based routing in AIX
  • From: rakeshson@xxxxxxxxx
• Re: paging strategy
  • From: base60
• Found 2247 unix jobs at www.jobvolume.com
  • From: JobVolume.com
• procfs mount hangs 5L diskless system
  • From: lcaamano
• Re: Installing browser on AIX
  • From: rynox
• strings command
  • From: connect
• 4.3.3 FTP Issue
  • From: bob
• Re: Got trouble when I build freetds and unixODBC on AIX5.3, need help!
  • From: mike
• 51 to 53 migration issue
  • From: kevin . counts
• Re: is there an equivalent to slices on aix and how to mount.
  • From: sjm
• Re: is there an equivalent to slices on aix and how to mount.
  • From: kevinm3574
• Re: Automatic Completion
  • From: Jurjen Oskam
• Re: is there an equivalent to slices on aix and how to mount.
  • From: Gary R. Hook
• Re: hardware req's for AIX 5.2-5.3????
  • From: Gary R. Hook
• Check if user can access a specific file.
  • From: hunter . zhough
• Re: is there an equivalent to slices on aix and how to mount.
  • From: aix
• Re: Automatic Completion
  • From: vlad . zam
• Re: is there an equivalent to slices on aix and how to mount.
  • From: vlad . zam
• is there an equivalent to slices on aix and how to mount.
  • From: kevinm3574
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Mark Taylor
• Re: source based routing in AIX
  • From: sjm
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Markus Baertschi
• Re: Hostname change problem
  • From: Anunay
• Re: nmon 10 segmentation fault
  • From: sjm
• Re: ls questions.
  • From: sjm
• Re: Hostname change problem
  • From: Dan Foster
• Re: Hostname change problem
  • From: Anunay
• Re: Hostname change problem
  • From: sjm
• Re: Automatic Completion
  • From: sjm
• Re: paging strategy
  • From: Mark Taylor
• Automatic Completion
  • From: bleclerc
• Re: Problem in movinig 1500 files
  • From: Hugo Bandilla
• LUM 4.6.8 reservable and offline licenses
  • From: Hugo Bandilla
• dlpar graphic card and usb port
  • From: day88
• Hostname change problem
  • From: Anunay
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Andreas Schulze
• source based routing in AIX
  • From: rakeshson@xxxxxxxxx
• Re: paging strategy
  • From: Frank Fegert
• Re: devices.pci.14103c00
  • From: mrkhairy
• Re: paging strategy
  • From: 0xbeef
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: bobmct
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: Jerald H. Mathews
• Re: paging strategy
  • From: base60
• Re: Problem in movinig 1500 files
  • From: base60
• paging strategy
  • From: Patrick
• Problem in movinig 1500 files
  • From: Chan
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: base60
• Re: massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: 0xbeef
• Re: hardware req's for AIX 5.2-5.3????
  • From: steven_nospam at Yahoo! Canada
• hardware req's for AIX 5.2-5.3????
  • From: christiancolborn
• massive performance hit after aix 4.3 -> 5.2 upgrade
  • From: christiancolborn
• Re: devices.pci.14103c00
  • From: Chris
• LFT unable to display with GXT250P adapter card
  • From: Chris
• Re: Question of Keyboard on 7046-B50 system unit?
  • From: Jerald H. Mathews

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(11)