Re: Moving from AIX 5.2 to 5.3



Hajo,

thanks a bunch for the detailed reply! I forgot to check the redbooks, which
I'll soon do,

best,
Mike

On Fri, 10 Feb 2006, Hajo Ehlers wrote:

\ Date: 10 Feb 2006 17:20:18 -0800
\ From: Hajo Ehlers <service@xxxxxxxxxxxxx>
\ Newsgroups: comp.unix.aix
\ Subject: Re: Moving from AIX 5.2 to 5.3
\
\ Michael E. Thomadakis wrote:
\ > Hi Hajo,
\ >
\ > On Fri, 10 Feb 2006, Hajo Ehlers wrote:
\ ...
\ > | If you have only one machine then i would do
\ > |
\ > | 1) use ' alt_disk_install ' to clone the live system to another free
\ > | disk
\ > | ( Keep the hdisk number AND the physical location number )
\ > |
\ > | 2) Active this new disk for booting.
\ >
\ > After the alt_disk_install, the system will reboot automatically off of the
\ > new hdisk, right?
\
\ Yes and keep clam because it is booting twice
\
\ >
\ > Or do I need to explicitly specify that this is the new hdisk to boot from?
\ > How?
\
\ No
\
\ > |
\ > | 3) Do a reboot to test this cloned rootvg
\ > | 4.1) If successfull, insert the AIX 5.3 CD and do your migration to AIX
\ > | 5.3
\ > |
\ >
\ > I can also specify that I want everything to be JFS2 at this point?
\ >
\
\ I truly do not know . Just give a try and if it fails use the step
\ mentioned later to convert from jfs to jfs2 ( Steps are NOT TESTED and
\ can lead to an unbootable system )
\
\ > We have some s/w installed in /opt . Is it going to get lost by the migrate?
\
\ If you do a migration - no
\ Read the AIX 5.3 Installation Guide about installation types. or the
\ mentioned PDF down below
\
\ > | If it fails, revert to the old version.
\ >
\ > How do I revert back to the old rootvg with alt_disk_install?
\
\ Boot the new installation and use the -W option of the alt_disk_install
\ or change the bootlist
\
\ >
\ > Can I keep different versions / releases of AIX in different hdisks and wake
\ > up the one I want to boot from next via the bootlist? How do I specify this
\ > via the alt_disk_install?
\
\ See the man pages for details
\
\ alt_disk_install Command
\ http://publib16.boulder.ibm.com/doc_link/en_US/a_doc_lib/cmds/aixcmds1/alt_disk_install.htm
\
\ image.data File and creation
\ http://publib16.boulder.ibm.com/doc_link/en_US/a_doc_lib/files/aixfiles/image.data.htm
\
\ mkszfile Command
\ http://publib16.boulder.ibm.com/doc_link/en_US/a_doc_lib/cmds/aixcmds3/mkszfile.htm
\
\
\ So for the doing. Read:
\ pSeries Administration and Support for AIX 5L Version 5.3
\ http://www.redbooks.ibm.com/redpieces/pdfs/sg247199.pdf
\ Chapter 3.6 to 3.8
\ because it shows all nessessary steps and should answer most of your
\ question
\
\ Addtional Information about converting from JFS to JFS2
\ Steps in case the alt_disk_install shell create jfs2 filesystem. Used
\ ONLY if the runing kernel is 64bit All steps are untested and can lead
\ to an unbootable system!
\
\ 1) Create a new /image.data - any existing will be overriden.
\ $ mkszfile -X
\
\ 2) Move the file to /image.data4jfs2
\ 3) Edit the /image.data4jfs2 abd change the type to JFS2 and check also
\ the log entries
\ 4) Do the alt_disk_install with the -i option ( -i /image.data4jfs2 )
\
\ hth
\ Hajo
\
\
.



Relevant Pages

  • Re: AIX 5.3 Installation Tips ( Man page, power4 fail on boot , DLPAR , Firmware )
    ... due to the helpful posts replies already out there by Gary Hook ("man ... Apr 2006) and Hajo Ehlers ("Install man pages ... AIX 5.3 Installation Tips ... AIX 5.3 Installation Tips ...
    (comp.unix.aix)
  • Re: Moving from AIX 5.2 to 5.3
    ... On Fri, 10 Feb 2006, Hajo Ehlers wrote: ... new hdisk, right? ... Or do I need to explicitly specify that this is the new hdisk to boot from? ... insert the AIX 5.3 CD and do your migration to AIX ...
    (comp.unix.aix)
  • Re: Performance Aide / perfagent.server
    ... "Hajo Ehlers" writes: ... Where can I find this fileset? ... AIX Performance AIDE and AIX Performance Toolbox are seperately ...
    (comp.unix.aix)
  • Re: console logging to syslog
    ... Hajo Ehlers wrote: ... switching all syslog debug, info etc etc on wont help if the operating system does not use syslog. ... which seems to be the problem with aix, unless some aix admin on here can tell me different ... On AIX you have the bootlog, console log, and errorlog. ...
    (comp.unix.aix)