Re: Problems with dual boot AIX 5.2 and 5.3

I think you don't have O.S. in your hdisk0 or your disk not is good,
but we can try to see what you have in your disk.

Execute this command:

lqueryvg -p hdisk0 -Avt.

Harrison.

.

Relevant Pages

  • Re: change defect hdisk0 on rs6000
    ... > we have a defect internal harddisk (hdisk0). ... > Resource Name: hdisk0 ... > Resource Class: disk ... > Detail Data ...
    (comp.unix.aix)
  • Re: rootvg in odm on hdisk0, in maintenance mode on hdisk1. Wrong odm? [Virus checked]
    ... You can leave it this way, but it drove me crazy, so I would change the SCSI ID so that the disk I ... wanted to be hdisk0 was always the lowest SCSI id of all the other SCSI drives on that SCSI card/bus. ... hdisk1 or will then be seen as hdisk0, when the ODM is available again. ...
    (AIX-L)
  • Re: Replacing rootvg mirror disk
    ... Verify extent of staleness: ... lsvg -l rootvg ... Unmirror the rootvg from the bad disk (hdisk0): ...
    (AIX-L)
  • Re: How to compute free space on Physical Disks?
    ... lspv -p hdisk0 - show allocated and unallocated PPs ... lscfg -vl hdisk0 - show what size disk ... IndiaInfo Mail - the free e-mail service with a difference! ...
    (AIX-L)
  • Re: Replacing hdisk0
    ... Your data survived hdisk0 failure. ... > In the case you have free disk bay, I would suggest you first to insert the ... > new disk and mirror rootvg to the new disk. ... This will remove rootvg from hdisk 0 use lspv to check. ...
    (comp.unix.aix)