Re: Really slow FTP performance


a...@xxxxxxxx wrote:

any dropped packets or other errors - entstat -d entX ?
any errors in error report?
is all communication slow, or just ftp?
what are the settings that you say you verified? autonegotiate?
have you run diags? have you tried different cable? different port?
different NIC?

I just went back a few minutes ago and took a closer look at the switch
port. It was autodetecting my card at 100/half even though the cards
was set to 100/full. I fixed the port on the switch and presto,
screaming performance. Thanks for the reply.

Dan

.

Relevant Pages

  • SUMMARY: Sun Qlogic HBA + Compaq/HP SAN Switch Issues
    ... I had failed to specify exactly which HBA card I was using. ... talk Fabric Mode (or connect on the F_Port in order for proper switch ... cannot do Fabric Mode...only Loop mode which is why this is not working. ... Bind by World Wide Port Name: ...
    (SunManagers)
  • Re: Network Multipathing Question
    ... requires two switches and no switch configuration is necessary. ... backup port (inactive) ... The second card would be on standby. ...
    (AIX-L)
  • x86 embedded Unix OS - help and suggestons
    ... I looking to build an FTP server and possible do NFS, ... Would this be enough to load the OS just to do ftp, RAID and possible NFS. ... I already have a DEC 2114 4 port ethernet card made by Intel. ...
    (comp.unix.questions)
  • Re: ssh scans
    ... that host is an Arrowpoint ... Port 5001 is the default port for the Application Peering Protocol. ... I highly doubt your switch has been compromised. ... > I can't get a telnet, or http response, but ssh and ftp do. ...
    (Incidents)
  • Re: Improving network performance
    ... > network and switch. ... A 4-port 100 mb/s card costs approximately twice as much as a single port ...
    (comp.os.linux.hardware)
Loading