comp.unix.aix
- hacmp 5.1 on aix 5.1 - sync issues with hw addr not unique, Alex Goncalves
- Problem adding new print queues. . ., Bill
- Problems with firmware upgrades, bfalk47755
- ftp put hangs,
UncleSteve
- Re: ftp put hangs,
Hajo Ehlers
- Re: ftp put hangs, Frank Fegert
- Re: ftp put hangs, Jon
- Re: ftp put hangs,
Hajo Ehlers
- Help with IPv6, Ravindra
- mkdev returns 1 as exit code without changing its state from Define and making available, venky
- HP 3800N print driver,
gdoogle
- Re: HP 3800N print driver, jim.sherrill@xxxxxxxxx
- port timeout,
esokol
- Re: port timeout, Frank Fegert
- MPIO NetApp,
Pete's
- Re: MPIO NetApp, Pete's
- Planning on running ncftpd on AIX, fillyawc
- using pax in place of tar,
TomK
- Re: using pax in place of tar,
Lőrinczy Zsigmond
- Re: using pax in place of tar, Mark Taylor
- Re: using pax in place of tar, Sven Mascheck
- Re: using pax in place of tar,
Lőrinczy Zsigmond
- dlopen() sees some symbols, but not others,
Rob Y
- Re: dlopen() sees some symbols, but not others, Paul Pluzhnikov
- Re: dlopen() sees some symbols, but not others, Gary R. Hook
- jfs2 filesystem crash???, rs6000er
- Re: help ...HACMP的問題, jthomp1515
- Mounting an AIX nfs share from linux,
JGoulart
- Re: Mounting an AIX nfs share from linux,
Paul Pluzhnikov
- Re: Mounting an AIX nfs share from linux, JGoulart
- Re: Mounting an AIX nfs share from linux,
Paul Pluzhnikov
- RSCT and file size monitoring!!! Tricky thing?,
Polani
- Re: RSCT and file size monitoring!!! Tricky thing?, Hajo Ehlers
- write mksysb to tape after the fact,
michael.shulman
- Re: write mksysb to tape after the fact,
jthomp1515
- Re: write mksysb to tape after the fact,
michael.shulman
- Re: write mksysb to tape after the fact, Joachim Gann
- Re: write mksysb to tape after the fact, dohhhh
- Re: write mksysb to tape after the fact, jthomp1515
- Re: write mksysb to tape after the fact, michael.shulman
- Re: write mksysb to tape after the fact,
michael.shulman
- Re: write mksysb to tape after the fact,
jthomp1515
- Reconciling Load Average and Percentage Idle,
Neil Truby
- Re: Reconciling Load Average and Percentage Idle,
Steve Thompson
- Re: Reconciling Load Average and Percentage Idle,
kcnainwal@xxxxxxxxx
- Re: Reconciling Load Average and Percentage Idle, Neil Truby
- Re: Reconciling Load Average and Percentage Idle,
kcnainwal@xxxxxxxxx
- Re: Reconciling Load Average and Percentage Idle,
Steve Thompson
- Is it possible to install xlc under user home directory (wihout root permissions), Basel
- Alternate Disk Migration problem, Mag
- get all shared memory segments,
upsa
- Re: get all shared memory segments,
Lőrinczy Zsigmond
- Re: get all shared memory segments,
0xDEADABE
- Re: get all shared memory segments, upsa
- Re: get all shared memory segments, rajbir
- Re: get all shared memory segments, rajbir
- Re: get all shared memory segments, Lőrinczy Zsigmond
- Re: get all shared memory segments, upsa
- Re: get all shared memory segments,
0xDEADABE
- Re: get all shared memory segments,
Lőrinczy Zsigmond
- TOPSVCS will not start, HACMP (clstrmgr) crashes node on start,
Bobohoolie
- Re: TOPSVCS will not start, HACMP (clstrmgr) crashes node on start, lucianomelomartins
- boot stops with 25B0, mirekb
- patches: AIX vs Solaris installation method, MJB
- getting dlopen() to link against my main executable, Rob Y
- bos.adt.libm.5.2.0.0,
Unix
- Re: bos.adt.libm.5.2.0.0,
Mark Taylor
- Re: bos.adt.libm.5.2.0.0, Mark Taylor
- Re: bos.adt.libm.5.2.0.0, Duhhh
- Re: bos.adt.libm.5.2.0.0,
Michael Kraemer
- Re: bos.adt.libm.5.2.0.0, Gary R. Hook
- Re: bos.adt.libm.5.2.0.0,
Mark Taylor
- ERROR: Volume Group rootvg on node: p650 is configured to auto-varyon., byron . hsu
- TAMfOS (Tivoli Access Manager for Operating Systems) - experience, kona
- testing PLM, Lukasz
- AIX 5.3 Network Interface Backup and etherchannel setup, AZUNIX
- Internal tape drive missing on P630 / 7028-6C4 ??, Sterve
- hot key by shell script,
shilpi . prasad
- Re: hot key by shell script, Lőrinczy Zsigmond
- DR Plan,
madunix
- Re: DR Plan, madunix
- Re: DR Plan,
Pete's
- Re: DR Plan, Mag
- automatic form feed on laserjet printer,
Tim Wunder
- Re: automatic form feed on laserjet printer,
Michael W. Ryder
- Re: automatic form feed on laserjet printer,
Tim Wunder
- Re: automatic form feed on laserjet printer, Michael W. Ryder
- Re: automatic form feed on laserjet printer, Tim Wunder
- Re: automatic form feed on laserjet printer,
Tim Wunder
- Re: automatic form feed on laserjet printer,
Michael W. Ryder
- packed decimal !!,
Sree
- Re: packed decimal !!,
smallpond
- Re: packed decimal !!, michael . abel
- Re: packed decimal !!,
smallpond
- Booting Problem 7029-8E3,
v.srikrishnan@xxxxxxxxx
- Re: Booting Problem 7029-8E3,
Andy
- Re: Booting Problem 7029-8E3,
v.srikrishnan@xxxxxxxxx
- Re: Booting Problem 7029-8E3, dohhhh
- Re: Booting Problem 7029-8E3, Andy
- Re: Booting Problem 7029-8E3, v.srikrishnan@xxxxxxxxx
- Re: Booting Problem 7029-8E3, aixdude
- Re: Booting Problem 7029-8E3,
v.srikrishnan@xxxxxxxxx
- Re: Booting Problem 7029-8E3,
Andy
- tar command and DVD,
Polani
- Re: tar command and DVD, tmpolzin
- Re: tar command and DVD, michael . abel
- Strange ksh93 problem, sambrntt
- Is perfstat API better /dev/kmem reading?, sergey . ku . groups
- What is better? getprocs and /proc, sergey . ku . groups
- Dead path EMC storage, inymen
- diff for patch,
MP
- Re: diff for patch, Laurenz Albe
- GUI design in AIX,
lssudhir@xxxxxxxxx
- Re: GUI design in AIX, Lőrinczy Zsigmond
- Re: GUI design in AIX, smallpond
- Pattern for a file,
astalavista
- Re: Pattern for a file, sllabres
- how to sync a cluster with interactive /yes -is it risky?,
karcanson
- Re: how to sync a cluster with interactive /yes -is it risky?, Andreas Schulze
- <Possible follow-ups>
- how to sync a cluster with interactive /yes -is it risky?, karcanson
- Cluster Synchronaization ?,
maw
- Re: Cluster Synchronaization ?, karcanson
- help with j2pg....,
cmstan2002@xxxxxxxxx
- Re: help with j2pg...., sllabres
- refreshing inetd,
Mel
- Re: refreshing inetd, c00p
- Re: refreshing inetd, c00p
- Re: refreshing inetd, Lőrinczy Zsigmond
- LTO 3580 Tape drive on AIX 4.3.3 ML8,
old-racefan
- Re: LTO 3580 Tape drive on AIX 4.3.3 ML8,
aixdude
- Re: LTO 3580 Tape drive on AIX 4.3.3 ML8, old-racefan
- Re: LTO 3580 Tape drive on AIX 4.3.3 ML8,
aixdude
- problem with starting hacmp service !, maw
- Process And Cpu,
Emre
- Re: Process And Cpu,
Mark Taylor
- Re: Process And Cpu, rajbir
- Re: Process And Cpu, Mark Taylor
- Re: Process And Cpu,
Mark Taylor
- FYI: AIX O/S updated to support 2007 Daylight Saving Time change, Hajo Ehlers
- Test pattern file name,
astalavista
- Re: Test pattern file name,
Mark Taylor
- Re: Test pattern file name, astalavista
- Re: Test pattern file name,
Mark Taylor
- Issue Restoring mksysb via FC Tape drive, c00p
- gcc 4.1.1 on AIX 5.2,
Ravindra
- Re: gcc 4.1.1 on AIX 5.2, Michael Kraemer
- Re: gcc 4.1.1 on AIX 5.2,
Frank Fegert
- Re: gcc 4.1.1 on AIX 5.2, Ravindra
- setting CPU quota,
Harshal
- Re: setting CPU quota, sivalingasamy@xxxxxxxxx
- fileplace and striped logical volumes, rossdruker
- windows-2.9 test hangs on AIX 5.1 with tk 8.4.14, allenjo5
- Redistributing the xlC runtime filesets,
fia_wrc_fanatic
- Re: Redistributing the xlC runtime filesets, Paul Landay
- Shareware: txt2pdf 9.2, mail
- xlf vs xlc,
Ganesh
- Re: xlf vs xlc, Patrick Begou
- Uncharacteristic behavior of system call cs,
shankha
- Re: Uncharacteristic behavior of system call cs,
Gary R. Hook
- Re: Uncharacteristic behavior of system call cs,
shankha
- Re: Uncharacteristic behavior of system call cs, Gary R. Hook
- Re: Uncharacteristic behavior of system call cs, shankha
- Re: Uncharacteristic behavior of system call cs, Gary R. Hook
- Re: Uncharacteristic behavior of system call cs,
shankha
- Re: Uncharacteristic behavior of system call cs,
Gary R. Hook
- HMC Cut & Paste,
bennett . tony
- Re: HMC Cut & Paste,
michael.shulman
- Re: HMC Cut & Paste, Jurjen Oskam
- Re: HMC Cut & Paste,
Andre Naumann
- Re: HMC Cut & Paste, bennett . tony
- Re: HMC Cut & Paste,
michael.shulman
- Problems with G++ - Undefined symbol: .,
Andrew Black (delete obvious bit)
- Re: Problems with G++ - Undefined symbol: .,
Paul Pluzhnikov
- Re: Problems with G++ - Undefined symbol: .,
Andrew Black (delete obvious bit)
- Re: Problems with G++ - Undefined symbol: ., Ravindra
- Re: Problems with G++ - Undefined symbol: ., Andrew Black (delete obvious bit)
- Re: Problems with G++ - Undefined symbol: ., Ravindra
- Re: Problems with G++ - Undefined symbol: .,
Andrew Black (delete obvious bit)
- Re: Problems with G++ - Undefined symbol: .,
Paul Pluzhnikov
- How to enable SHA-1 on AIX LDAP clients,
ctierney42
- Re: How to enable SHA-1 on AIX LDAP clients,
aixdude
- Re: How to enable SHA-1 on AIX LDAP clients, ctierney42
- Re: How to enable SHA-1 on AIX LDAP clients,
aixdude
- Printing PDF,
astalavista
- Re: Printing PDF, sllabres
- very annoying problem,
Mike Klein
- Re: very annoying problem,
Frank Fegert
- Re: very annoying problem,
Mike Klein
- Re: very annoying problem, Frank Fegert
- Re: very annoying problem, Jurjen Oskam
- Re: very annoying problem, Patrick Begou
- Re: very annoying problem,
Mike Klein
- Re: very annoying problem, Jurjen Oskam
- Re: very annoying problem,
Frank Fegert
- AIX Settings for Migration Project, jdmash55@xxxxxxxxx
- Error While Connecting to AIX 5.2 thro' Putty, karan
- CDROM NFS to AIX5.3 Hangs on read,
marionl@xxxxxxxxxx
- Re: CDROM NFS to AIX5.3 Hangs on read, marionl@xxxxxxxxxx
- Remote Mount CDFS for loading AIX filesets,
steven_nospam at Yahoo! Canada
- Re: Remote Mount CDFS for loading AIX filesets,
c00p
- Re: Remote Mount CDFS for loading AIX filesets, scott_doyland
- Re: Remote Mount CDFS for loading AIX filesets, steven_nospam at Yahoo! Canada
- Re: Remote Mount CDFS for loading AIX filesets,
c00p
- AIX 5.1 to 5.3 Upgrade,
tb303
- Re: AIX 5.1 to 5.3 Upgrade, pinoy2ser
- terminate weird proccess,
jjur
- Re: terminate weird proccess, bennett . tony
- vacpp 8.0.0.0,
stevint
- Re: vacpp 8.0.0.0, sol gongola
- Re: vacpp 8.0.0.0,
Laurenz Albe
- Re: vacpp 8.0.0.0,
stevint
- Re: vacpp 8.0.0.0, Michael Kraemer
- Re: vacpp 8.0.0.0, stevint
- Re: vacpp 8.0.0.0,
stevint
- Failure on physical volume 0000000000000000,
rutherf
- Re: Failure on physical volume 0000000000000000, Bobohoolie
- DB2 LDAP queries, bscottberg
- Introducing pitchbuster.com - Bust those sales pitches, TruthSeeker
- C locale, empty strings literals and NULL pointers on 5.3,
Hans Rosenfeld
- Re: C locale, empty strings literals and NULL pointers on 5.3, Lőrinczy Zsigmond
- Re: C locale, empty strings literals and NULL pointers on 5.3, Gary R. Hook
- SSH 4.5P1 HOSTBASED authentication,
herbert koelman
- Re: SSH 4.5P1 HOSTBASED authentication,
Claudiu Costin
- Re: SSH 4.5P1 HOSTBASED authentication,
herbert koelman
- Re: SSH 4.5P1 HOSTBASED authentication, Darren Tucker
- Re: SSH 4.5P1 HOSTBASED authentication, herbert koelman
- Re: SSH 4.5P1 HOSTBASED authentication,
herbert koelman
- Re: SSH 4.5P1 HOSTBASED authentication,
Claudiu Costin
- Moving tapes in a library without software,
Scott
- Re: Moving tapes in a library without software,
Jurjen Oskam
- Re: Moving tapes in a library without software,
0xDEADABE
- Re: Moving tapes in a library without software, Menno Willemse
- Re: Moving tapes in a library without software, 0xDEADABE
- Re: Moving tapes in a library without software,
0xDEADABE
- Re: Moving tapes in a library without software,
Jurjen Oskam
- unable to build Math-GMP perl module on AIX 5.3, zrnaqvi
- Unable to install Java 1.4 due to License Problem,
stevint
- Re: Unable to install Java 1.4 due to License Problem, Mark Taylor
- Re: Unable to install Java 1.4 due to License Problem, Joachim Gann
- Re: Unable to install Java 1.4 due to License Problem, Philip Morten
- Re: Unable to install Java 1.4 due to License Problem, Menno Willemse
- 43P140 processor upgrade, Dave
- SCSI Hot Swap Manager Missing, ankhu
- Flushing a message queue,
soccertl
- Re: Flushing a message queue, soccertl
- Getting hostnames from HMC comamnd line, Polani
- How to send attachment with mail in AIX ???,
Arvind
- Re: How to send attachment with mail in AIX ???,
jp
- Re: How to send attachment with mail in AIX ???, Tim Wunder
- Re: How to send attachment with mail in AIX ???, Clive George
- Re: How to send attachment with mail in AIX ???, sol gongola
- Re: How to send attachment with mail in AIX ???,
c00p
- Re: How to send attachment with mail in AIX ???, Tim Wunder
- Re: How to send attachment with mail in AIX ???, Michael Wuensche
- Re: How to send attachment with mail in AIX ???,
jp
- Re: ML level in AIX, Gregory Young
- Re: alt disk install - confusion, Gregory Young
- HACMP 5.3 3-nodes cluster, calls network_down 5 sec after node_up by itself, Blagoycho
- ICMP SEQ # and ICMP ID question, Jigs
- Flow control and full duplex.,
Patrick Finnegan
- Re: Flow control and full duplex., scott_doyland
- AIX - Java14_64.sdk base file set 1.4.0.0,
stevint
- Re: AIX - Java14_64.sdk base file set 1.4.0.0, Paul Landay
- warning led on a IBM P510,
relikwie
- Re: warning led on a IBM P510,
David Littlewood
- Re: warning led on a IBM P510, scott_doyland
- Re: warning led on a IBM P510,
David Littlewood
- filtering with ipsec,
Patrick Begou
- Re: filtering with ipsec, Bela
- Compilation Problems under AIX5.2 and gcc,
William R. Mattil
- Re: Compilation Problems under AIX5.2 and gcc,
William R. Mattil
- Re: Compilation Problems under AIX5.2 and gcc,
Frank Fegert
- Re: Compilation Problems under AIX5.2 and gcc, William R. Mattil
- Re: Compilation Problems under AIX5.2 and gcc, Ian Northeast
- Re: Compilation Problems under AIX5.2 and gcc,
Frank Fegert
- Re: Compilation Problems under AIX5.2 and gcc, Jozek
- Re: Compilation Problems under AIX5.2 and gcc,
William R. Mattil
- hmc/firmware upgrade,
pinoy2ser
- Re: hmc/firmware upgrade, Andre Naumann
- Re: hmc/firmware upgrade,
Stackwick
- Re: hmc/firmware upgrade,
Andre Naumann
- Re: hmc/firmware upgrade, pinoy2ser
- Re: hmc/firmware upgrade,
Andre Naumann
- Show CPU and process,
Rahan
- Re: Show CPU and process,
sarccastik
- Re: Show CPU and process,
Rahan
- Re: Show CPU and process, Kuba Glebicki
- Re: Show CPU and process, Rahan
- Re: Show CPU and process,
Rahan
- Re: Show CPU and process,
sarccastik
- xterm or dtterm use kernel usage, pinoy2ser
- emacs 22.0.91 for aix 5.3 available, Perry Smith
- login in script,
capeme
- Re: login in script, c00p
- Re: login in script, capeme
- case of hidden memory in 5.3,
rutherf
- Re: case of hidden memory in 5.3,
Clive George
- Re: case of hidden memory in 5.3, rutherf
- Re: case of hidden memory in 5.3,
Frank Fegert
- Re: case of hidden memory in 5.3, Mark Taylor
- Re: case of hidden memory in 5.3,
Clive George
- booting up into ascii mode instead of GUI,
pete
- Re: booting up into ascii mode instead of GUI, c00p
- Re: booting up into ascii mode instead of GUI,
Jim Lahue
- Re: booting up into ascii mode instead of GUI, Gary R. Hook
- Re: booting up into ascii mode instead of GUI, David Littlewood
- Re: chvg -t on a Fast, pinoy2ser
- Re: difference of *.so and *.a files,
Gary R. Hook
- <Possible follow-ups>
- Re: difference of *.so and *.a files, Gary R. Hook
- Re: Portability issues, Gary R. Hook
- HMC Patches,
Mag
- Re: HMC Patches,
Jurjen Oskam
- Re: HMC Patches,
Mag
- Re: HMC Patches, Jurjen Oskam
- Re: HMC Patches,
Mag
- Re: HMC Patches,
Jurjen Oskam
- scripting mkuser,
relikwie
- Re: scripting mkuser, Clive George
- Re: scripting mkuser, aix
- websm com.ibm.jcb.RemoteSourceException, rutherf
- Risc system/6000 530h - serial console,
clearsreen
- Re: Risc system/6000 530h - serial console, Jerald H. Mathews
- Re: Risc system/6000 530h - serial console,
s11018
- Re: Risc system/6000 530h - serial console,
Frank Fegert
- Re: Risc system/6000 530h - serial console, Paul Landay
- Re: Risc system/6000 530h - serial console, Frank Fegert
- Re: Risc system/6000 530h - serial console,
Frank Fegert
- Console Locks Up,
Boysey
- Re: Console Locks Up, aix
- Re: Console Locks Up, Jerald H. Mathews
- Re: webSM problems?,
gunnar . petersson
- Re: webSM problems?, Hajo Ehlers
- g++ 4.1.1 with pthread option on powerpc-ibm-aix5.3.0.0, Alberto
- Can I use 5 Ethernet adapter cards in a RS/6000 44P ?, j3
- Looking for SSH + PAM BFF or RPM,
herbert koelman
- Re: Looking for SSH + PAM BFF or RPM,
Darren Tucker
- Re: Looking for SSH + PAM BFF or RPM,
herbert koelman
- Re: Looking for SSH + PAM BFF or RPM, Darren Tucker
- Re: Looking for SSH + PAM BFF or RPM,
herbert koelman
- Re: Looking for SSH + PAM BFF or RPM,
Darren Tucker
- Re: HMC emulation, sivalingasamy@xxxxxxxxx
- Appropriate applications for GPFS,
ctierney42
- Re: Appropriate applications for GPFS,
Blade
- Re: Appropriate applications for GPFS, ctierney42
- Re: Appropriate applications for GPFS,
Blade
- mkdvd normally slow?,
pinoy2ser
- Re: mkdvd normally slow?,
aixdude
- Re: mkdvd normally slow?,
pinoy2ser
- Re: mkdvd normally slow?, aixdude
- Re: mkdvd normally slow?,
pinoy2ser
- Re: mkdvd normally slow?,
aixdude
- GhostScript on AIX,
lupo75
- Re: GhostScript on AIX,
Martin Etteldorf
- Re: GhostScript on AIX,
lupo75
- Re: GhostScript on AIX, Martin Etteldorf
- Re: GhostScript on AIX, lupo75
- Re: GhostScript on AIX, Martin Etteldorf
- Re: GhostScript on AIX,
lupo75
- Re: GhostScript on AIX,
Martin Etteldorf
- Searching a number other than 0, chaitu
- printer - HP OfficeJet 7310 all in one,
Tim Wunder
- Message not available
- Re: printer - HP OfficeJet 7310 all in one, Tim Wunder
- Message not available
- Printing to a File in AIX 5.3, jesper
- Re: DELETE logical I/O SLOT AIX,
Mark Taylor
- Re: DELETE logical I/O SLOT AIX, pinoy2ser
- Diff between compressed file system and a normal jfs2, rcee
- Re: Fuser command running long,
rcee
- Re: Fuser command running long, sethwai@xxxxxxxxx
- Re: Java Class not found,
Uli
- Re: Java Class not found, Laurenz Albe
