Re: [FreeBSD 5.1] Large hard disks vs old BIOS

From: Kris Kennaway (kkenn_at_xor.obsecurity.org)
Date: 10/29/04

  • Next message: ChrisS1642: "Re: Epson C86 USB printer FreeBSD 4.9"
    Date: Thu, 28 Oct 2004 22:58:51 GMT
    
    

    On 2004-10-28, Jehannes <john@ilseWITHOUTTHIS.nl> wrote:
    > Is there a way to make FreeBSD 5.1 recognize hard disks larger than the
    > BIOS supports?
    > I read somewhere that Linux could do it through direct access to the
    > hardware.
    > My BIOS is Award 6240 V 1.04 WB. It recognizes disks up to 8 Gb.
    > TIA

    I thought FreeBSD just worked, although of course you can't boot from
    a partition beyond where the BIOS can read. Does your experience show
    otherwise? If so, please provide more details.

    Kris


  • Next message: ChrisS1642: "Re: Epson C86 USB printer FreeBSD 4.9"

    Relevant Pages

    • FreeBSD on IBM BladeCenter?
      ... Any success stories out there of getting FreeBSD running on IBM BladeCenter hardware? ... tried with BIOS 1.2 on blade. ... FreeBSD 5.2.1 booting from CD, ... acpi_bus_number: can't get _ADR ...
      (freebsd-hackers)
    • Re: fBSD on Duron
      ... I'm assuming your trying to install freebsd... ... Next step, set all BIOS setting to there defaults (safe defaults, not ... only things you need are cpu, mainboard, ram, video, keyboard (this ones ... FreeBSD 5.2-RELEASE and later no longer support the 80386SX processor.) ...
      (freebsd-questions)
    • Re: 3 things working in -STABLE and not in -CURRENT
      ... >> BIOS) and rebooting. ... >> as I've been using FreeBSD for nine years now, ... FreeBSD's lack of hardware support in certain areas that are very ...
      (freebsd-current)
    • Re: xorg.conf dell optix gx260
      ... While looking at the error log is offering ... Will attempt to tell the BIOS that there is 12288 kB VideoRAM ... Current Operating System: FreeBSD Harlan.bjh.homenet 5.3-RELEASE FreeBSD ... I810: [dri] DRIScreenInit failed. ...
      (comp.unix.bsd.freebsd.misc)
    • Re: FreeBSD on IBM BladeCenter?
      ... Have you tried FreeBSD 6.Current? ... >HS20 blade machine type: 8843 ... >tried with BIOS 1.2 on blade. ... >tried with CPU write back cache enabled/disabled in BIOS. ...
      (freebsd-hackers)