'fetch' question

From: John Smith (jsmith_at_macroshaft.com)
Date: 12/30/04 

Date: Thu, 30 Dec 2004 09:15:59 -0500

does anyone know how to force fetch to only use ipv4 (ie the '-4' switch)
when doing installations from ports?

(fbsd 5.3)

Relevant Pages

  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: Configuring Cisco IPS High Bandwidth Using EtherChannel Load Balancing
    ... "If the paired interfaces are connected to the same switch, ... VLANs for the two ports. ... IPS is able to track traffic per-VLAN, ... VLAN Pair mode uses one interface only and this is the only supported ...
    (Focus-IDS)
  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: running out of IP Address! help!
    ... I believe it could handle 4096 VLANs + router interfaces. ... a layer-3 switch is the way to go. ... having subnets won't prevent broadcasts. ... will only hit ports that are members of that VLAN, ...
    (microsoft.public.win2000.networking)
  • Re: Auto-sensing for IPS devices
    ... Auto-Negotiation is essential in larger networks. ... about 1000's of switch ports and PC's connecting/disconnecting ... the ports at whatever they need to be. ... > you MUST set BOTH speed and duplex settings and you MUST set BOTH ...
    (Focus-IDS)