Re: software raid survey
Michel wrote "By the way, for doing what you have done, striping and
then mirroring, you can very well do that with gstripe and gmirror,
very easily, with
much less risk than with gvinum."
I did not know that, thanks. Maybe next time I have a break between
projects, I will give it a shot.
- first pre-emptive raid
... proper server rather than as a desktopish installation being used as a ... is striping or mirroring faster as far as i/o goes (or does the ... somehow over all the drives though #20.5.2 Redundant Data Storage has ...
- Re: gmirror, gvinum or ccd to mirror root-filesystem under 6.0R
... ccd or gvinum for software-raid for mirroring the root ... I am very happy with gmirror; I have only observed two major problems ... (This wasn't the root filesystem btw - if it was the root filesystem ...
- Re: RAID 0 OR NOT?
... > security as these files are pretty much backed up already ... > performance between the serial ATA hard drives that come ... striping or mirroring just feels loser and quicker. ...
- RE: integrated SATA RAID controller on Intel server board SE7520bd2
... Regarding multiple posts on the current ata driver in 5.4 not supporting ... hardware mirroring with the Intel ICH5R and ICH6R chips ... ... if you are playing around with gmirror on the same ... information on the last sector of your disks. ...
- Re: Would ZFS and gmirror work well together in a two-node failover cluster?
... Don't forget to change the SCSI ... there would be a SATA JBOD attached internally with a 3Ware or Areca card. ... Right, there would be a primary server,which contains the mounted drives and the failover, where only the ggated and gmirror see the ... gmirror would be doing mirroring, but ZFS would be doing RAIDZ2. ...