Strange problems with 3.4
From: helmingstay (foo_at_porto.bmb.uga.edu)
Date: 03/26/04
- Next message: Miod Vallat: "Re: Strange problems with 3.4"
- Previous message: J'm Sm'th: "Re: Getting software to recognize gcc-3.2.3"
- Next in thread: Miod Vallat: "Re: Strange problems with 3.4"
- Reply: Miod Vallat: "Re: Strange problems with 3.4"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 26 Mar 2004 11:30:45 -0800
I just installed 3.4 on a new machine with a Tyan Tiger MPX board and
a single Athlon XP CPU. I had all sorts of problems with the machine
hanging during boot, "stray interrupt 7" errors and the like. Through
a voodoo ritual of enabling and disabling things in the BIOS,
switching serial ports around (I'm using a serial console), disabling
npx in the kernel config, and lots of rebooting I've managed to get it
to boot. Dmesg follows. The next problem is that I get all sorts of
errors from the vi recover script during boot:
boot> boot -c
booting hd0a:/bsd: 4464500+838332 [58+204240+181750]=0x56cfd0
entry point at 0x100120
�
[ using 386464 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon XP Model 10 (Barton) ("AuthenticAMD" 686-class) 1.67
GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 535916544 (523356K)
avail mem = 491040768 (479532K)
using 4278 buffers containing 26898432 bytes (26268K) of memory
User Kernel Config
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(c5) BIOS, date 04/11/03, BIOS32 rev. 0 @
0xfd6b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd6b0/0x950
pcibios0: PCI BIOS has 13 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0800/0x800 0xe0000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 762 Host-PCI" rev 0x20
ppb0 at pci0 dev 1 function 0 "AMD 762 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "AMD 768 PCI-ISA" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 768 IDE" rev 0x04: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00ETA0>
wd0: 16-sector PIO, LBA48, 38166MB, 16383 cyl, 16 head, 63 sec,
78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"AMD 768 Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 16 function 0 "AMD 768 PCI-PCI" rev 0x05
pci2 at ppb1 bus 2
ohci0 at pci2 dev 0 function 0 "AMD 768 USB" rev 0x07: irq 10, OHCI
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
xl0 at pci2 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
10xl0: command never completed!
xl0: command never completed!
address 00:e0:81:28:1c:7a
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: command never completed!
xl0: command never completed!
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 4400 netmask 4400 ttymask 4482
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rwd0a: INCORRECT BLOCK COUNT I=8 (180 should be 0) (CORRECTED)
/dev/rwd0a: INCORRECT BLOCK COUNT I=1174657 (4 should be 0)
(CORRECTED)
/dev/rwd0a: UNREF FILE I=1174657 OWNER=root MODE=100600
/dev/rwd0a: SIZE=0 MTIME=Mar 26 13:36 2004 (CLEARED)
/dev/rwd0a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/rwd0a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/rwd0a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/rwd0a: 1550 files, 15531 used, 5143848 free (128 frags, 642965
blocks, 0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
/dev/rwd0e: 8008 files, 56222 used, 8339361 free (281 frags, 1042385
blocks, 0.0% fragmentation)
/dev/rwd0e: MARKING FILE SYSTEM CLEAN
/dev/rwd0d: INCORRECT BLOCK COUNT I=473988 (128 should be 0)
(CORRECTED)
/dev/rwd0d: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/rwd0d: SUMMARY INFORMATION BAD (SALVAGED)
/dev/rwd0d: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/rwd0d: 690 files, 3292 used, 5156103 free (135 frags, 644496
blocks, 0.0% fragmentation)
/dev/rwd0d: MARKING FILE SYSTEM CLEAN
setting tty flags
starting network
route: vin: bad value
writing to routing socket: Invalid argument
add net default: Invalid argument
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
preserving editor files
Use of uninitialized value in concatenation (.) or string at
/usr/libdata/perl5/i386-openbsd/5.8.0/XSLoader.pm line 43.
Use of uninitialized value in subroutine dereference at
/usr/libdata/perl5/i386-openbsd/5.8.0/XSLoader.pm line 44.
Use of uninitialized value in concatenation (.) or string at
/usr/libdata/perl5/Exporter.pm line 33.
Use of uninitialized value in concatenation (.) or string at
/usr/libdata/perl5/Exporter.pm line 34.
Use of uninitialized value in concatenation (.) or string at
/usr/libdata/perl5/Exporter.pm line 34.
Use of uninitialized value in array dereference at
/usr/libdata/perl5/Exporter.pm line 35.
Use of uninitialized value in numeric gt (>) at
/usr/libdata/perl5/Exporter.pm line 35.
Use of uninitialized value in array dereference at
/usr/libdata/perl5/Exporter.pm line 37.
Unquoted string "croak" may clash with future reserved word at
/usr/libdata/perl5/warnings.pm line 294.
Array found where operator expected at /usr/libdata/perl5/warnings.pm
line 294, at end of line
(Missing operator before ?)
syntax error at /usr/libdata/perl5/warnings.pm line 294, near "croak
@_ "
Compilation failed in require at
/usr/libdata/perl5/warnings/register.pm line 24.
Compilation failed in require at /usr/libdata/perl5/vars.pm line 7.
BEGIN failed--compilation aborted at /usr/libdata/perl5/vars.pm line
7.
Compilation failed in require at
/usr/libdata/perl5/i386-openbsd/5.8.0/DynaLoader.pm line 18.
BEGIN failed--compilation aborted at
/usr/libdata/perl5/i386-openbsd/5.8.0/DynaLoader.pm line 18.
Compilation failed in require at
/usr/libdata/perl5/i386-openbsd/5.8.0/XSLoader.pm line 108.
Compilation failed in require at /usr/libexec/vi.recover line 8.
Once I log in, I find that ps segfaults:
# ps -u root
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME
COMMAND
ps: nlist: can't find following symbols: _fscale _ccpu _physmem
_maxslp
Memory fault (core dumped)
So does dd:
# dd
<Ctrl-d>
Memory fault (core dumped)
I disabled ECC and ran memtest86 for 22 hours, and the memory is fine.
Also I checked the md5 sum of /bsd and it matches the distribution,
so the kernel image is not corrupted. Any help would be appreciated,
and let me know if more information is needed.
Thanks
-ryan
- Next message: Miod Vallat: "Re: Strange problems with 3.4"
- Previous message: J'm Sm'th: "Re: Getting software to recognize gcc-3.2.3"
- Next in thread: Miod Vallat: "Re: Strange problems with 3.4"
- Reply: Miod Vallat: "Re: Strange problems with 3.4"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
