Re: found problem in 3.5 stable emu driver

From: John Doe (john_at_vcable.net)
Date: 05/08/04 

Date: Sat, 08 May 2004 13:02:02 +0000

Bas Keur wrote:
> | i found problem in OpenBSD i386 3.5 stable, this problem also exist in
> | 3.4 stable.
>
> Are you *really* sure it's the OS ? :)

Yes, i sure.

>
> $ dmesg |grep -A4 "emu0 at"
> emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev 0x0a:
> irq 9
> ac97: codec id 0x454d4328
> ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo
> audio0 at emu0
> "Creative Labs SoundBlaster Live Digital Input" rev 0x0a at pci0 dev 10
> function 1 not configured
>
>
> | $ cat /etc/mixerctl.conf
> | inputs.mic=7
> | inputs.mic.mute=on
> | record.volume=15,15
> | record.volume.mute=on
>
> $ mixerctl inputs.mic inputs.mic.mute record.volume record.volume.mute
> inputs.mic=255
> inputs.mic.mute=off
> record.volume=15,15
> record.volume.mute=on
>
> | By default microphone is mute, but when play any audio file
> | mic volume is on and if speakers volume is center (from 1 min
> | to 8 max,| now is 4, sorry of my bad english)
> | i hear terabble noise.
>
> I'm playing my techno collection at this very moment and the
> sound quality is perfect. (as in *Cristal Clear*) no noise at all.
> (Some might call it noise though, you know 'old people')
> But seriously, works fine here with 3.4 & 3.5
> My mic doesn't have your issues either.

May be in your system this problem does't exist.

I now found problem.
The problem is that my microphone is voluminous and get
all noises from my room and insert into card.
I know this problem exist in windows too, the microphone
cable must be swich off from card or mute (i use mute in windows) when
the micrphone is too close to speakers.

>
> | Any body know how to resolve this problem?
>
> Hmz.. what are the specs of your machine ? (Mem/Cpu)
> Did you try loading your bios to it's default configuration ?
>

Regards,
Condor
>
> Good luck.
>
>

Relevant Pages

  • Re: Sound IN, not going in...
    ... Windows XP, ... No matter what we ... the microphone would be muted. ... and we would see the mute boxes be checked. ...
    (microsoft.public.windowsxp.general)
  • Re: How to use Microphone
    ... I've checked that micphone is not mute. ... There's no topic for setting up a microphone... ... perhaps because i am using windows 2000, ...
    (microsoft.public.windowsxp.general)
  • Re: mute usb microphone with keyboard
    ... but not have to do so through the control panel. ... to be able to mute and unmute the microphone by pressing a series of keys ... Depending on the sound recorder you use, the commands may ...
    (microsoft.public.windowsxp.general)
  • Re: How to mute microphone of a phone device while on the call. ??
    ... So, will it be possible through hardware audio mixer api, to mute the ... microphone only and continue functioning speaker-headset part of the device ... >> should be able to get the voice from other side.. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Microphone does NOT work
    ... I once recorded an awful lot of silence because my mic was mute. ... Is Microphone ... >The Voice Recognition Panel has nothing to do with configuring the mic. ...
    (microsoft.public.windowsxp.customize)
Loading