[OpenBSD 3.4] Wake on Lan fail after shutdown

From: Steffen (no.spam_at_arcor.de)
Date: 07/29/04 

Date: Thu, 29 Jul 2004 00:46:34 +0200

Hi,

i use a Asus P2L97 Board (latest Bios release) with a 3Com 3c905C
100Base-TX Nic. Both, Board and Nic support WoL (Bios settings are ok).
My problem is, that WoL only work in one case ... i had to switch on the
PC for a few seconds and switch it of immediately. After these action i
can start the PC with a magic packet. My power supply support WoL, so i
think this cant be the reason...

Any ideas?

Steffen

PS: here is my dmesg ... 

-- 
Thanks 
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 375
MHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR real mem  = 402231296 (392804K)
avail mem = 366616576 (358024K)
using 4278 buffers containing 20213760 bytes (19740K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b8) BIOS, date 07/04/00, BIOS32 rev. 0 @
0xf04d0 apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xd52
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0cc0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB PCI-ISA" rev
0x00) pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility wd0
at pciide0 channel 0 drive 0: <ST340014A> wd0: 16-sector PIO, LBA48,
38166MB, 16383 cyl, 16 head, 63 sec, 78165360 sectors atapiscsi0 at
pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-540E, 3.0A> SCSI0 5/cdrom
removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST340014A>
wd1: 16-sector PIO, LBA48, 38166MB, 16383 cyl, 16 head, 63 sec, 78165360
sectors wd2 at pciide0 channel 1 drive 1: <IC35L090AVV207-0>
wd2: 16-sector PIO, LBA48, 78533MB, 16383 cyl, 16 head, 63 sec,
160836480 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 4 function 3 not
configured rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 10
address 00:00:21:d4:f4:34 rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:e0:7d:7d:a8:55 rlphy1 at rl1 phy 0: RTL internal phy
vga1 at pci0 dev 12 function 0 "ATI Mach64 GU" rev 0x9a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 13 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 12
address 00:04:76:1e:22:0a exphy0 at xl0 phy 24: Broadcom 3C905C internal
PHY, rev. 6 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83781D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask d040 netmask dc40 ttymask dc42
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Relevant Pages