Re: first time install problem

From: Jan Mannoury (mja_at_werktniet.nl)
Date: 09/26/05 

Date: Mon, 26 Sep 2005 14:35:21 +0200

On Mon, 26 Sep 2005 13:53:38 +0200, Jan Mannoury <mja@werktniet.nl>
wrote:

>i'll be honest. it seems i didn't make the / partition 150 mb but only
>1.5
>i'm going to find a quiet spot to sit down and be very ashamed of
>myself for the rest of the day.

nope. i was looking at the wrong table it was rd0a thats only 1.7M not
wd0a. here's my dmesg if anyone can make anything out of it:

OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class) 1.54 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536391680 (523820K)
avail mem = 483627008 (472292K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 09/23/02, BIOS32 rev. 0 @
0xfb450
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Vanta" rev 0x15
wsdisplay0 at vga1: console (80x25, vt100 emulation)
em0 at pci0 dev 9 function 0 "Intel PRO/1000MT (82541EI)" rev 0x00:
irq 10, address: 00:0e:0c:6d:a4:e1
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5 address
00:10:a7:0f:62:f3
rlphy0 at rl0 phy 0: RTL internal phy
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y120P0>
wd0: 16-sector PIO, LBA, 117246MB, 240121728 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, U30> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"VIA VT8233 AC97" rev 0x50 at pci0 dev 17 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2,
iclass 3/1
uhid at uhidev0 not configured
uid 0 on /: file system full

janm 

-- 
I am the Lizard King
I can do anything

Relevant Pages