Problems with HP dx5150/ATI Xpress 200 chipset

From: Williams, Jeffrey (jeff_at_sailorfej.net)
Date: 11/03/05

  • Next message: Helmut Schneider: "managing pf rules and logfiles" 
    Date: Wed, 02 Nov 2005 19:01:02 -0800

    I have recently purchased a number HP DX5150 SFF desktops with idea of
    using them as basic infrastructure servers (e.g. DNS, DHCP, and
    firewall). I prefer to use -stable versions of FreeBSD and OpenBSD.
    Following are the specs on the boxes:

    HP dx5150
    AMD Sempron 3000+
    ATI Radeon Xpress 200 chipset
    ATI SATA/100 hdd
    ATI USB
    ATI Integrated Graphics
    Broadcom BCM5751 network
    HP/ATI specific Award bios, v1.06

    I have tried installs with fbsd 4.11, 5.4 and obsd 3.7 and 3.8. I have
    done enough searching of mailing lists and google to know that this
    chipset is problematic at the moment for BSD and for that matter linux,
    however I hoping that someone can suggest fixes, work arounds, and
    expected upcoming releases that will allow me to run these boxes
    reliably on stable versions of fbsd and obsd.

    For all the installs I made the following changes to the default BIOS
    settings:

    Advanced Chipset features:
    GFX Multi-Function Mode: disabled
    UMA Frame Buffer Size: 16M
    Video Display Devices: CRT only
    Init Display First: Onboard

    fbsd 4.11 was the only one I was able to get to install fully and with
    basic functionality, including network working. Although I am not
    confident in its long term stability (continuous stray IRQ errors,
    incorrect drive geometry detection which is not correctable via fdisk,
    disfunctional APM)

    fbsd 5.4 boot fails unless APIC mode is completely disabled under
    Advanced BIOS Features, I tried it active with both MPS versions 1.1 and
    1.4. It will boot fully with APIC disabled but the bge driver fails to
    initialize and drive geometry is incorrectly detected as in 4.11, and
    the install invariably fails with a panic at various point during the
    copying of files to the new volumes (possibly to bad drive geometry?).
    APM driver(s) also seem to fail initialization.

    obsd 3.7 boots and installs, but unless USB Legacy support under
    Integrated Perifpherals/OnChip USB Controller is disabled the PS/2
    attached keyboard ceases to function (stalling install at the
    install/upgrade/shell prompt unless using serial console). As with
    fbsd5.4 the bge driver and apm driver(s) fail to initialize. obsd also
    incorrectly detects drive geometry but gets closer to the actual numbers
    fbsd, I did not try to manually correct, I am not as
    familiar/comfortable with openbsd's disklabel, the drive did "seem" more
    stable.

    obsd 3.8 boot fails completely unless USB Legacy support is disabled,
    with it disabled I was able to complete the install, however as with 3.7
    and fbsd5.4 the bge and apm drivers fail to initialize.

    APIC settings did not seem to affect obsd boot or installs, also there
    are no specific BIOS settings specifically identifying the installed OS
    as PNP or not. The PNP settings consist of "Reset Confifuration Data
    [enable/disable]", "Resources Controlled By [Auto(ESCD)/Manual]" with a
    Manual sub-menu of "IRQ x [PCI/reserved]", "Assign IRQ for VGA
    [enable/disable]", and "Assign IRQ for USB [enable/disable]".
    Manipulation of these settings had no apparent effect on the obsd or
    fbsd booting.

    Attached are the dmesg dumps from the various boot/install attempts, if
    you need any other info to help diagnose please let me know. I am
    hoping someone can help me get these to work, as I am not looking for
    forward to trying to return them to the vendor.

    Thanks
    Jeffrey Williams
    jeff@sailorfej.net

    dmesgs for fbsd4.11, fbsd5.4-APIC1.1, fbsd5.4-APIC1.4, fbsd5.4-noAPIC,
    obsd3.7-legUSB, obsd3.7-nolegUSB, obsd3.8-legUSB, obsd3.8-nolegUSB

    *************************************
    ************************** fbsd 4.11
    *************************************
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
    FreeBSD 4.11-RELEASE #0: Fri Jan 21 17:21:22 GMT 2005
         root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
    Timecounter "i8254" frequency 1193182 Hz
    CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
       Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0

    Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
       AMD Features=0xc0500000<<b20>,AMIE,DSP,3DNow!>
    real memory = 233766912 (228288K bytes)
    avail memory = 221896704 (216696K bytes)
    Preloaded elf kernel "kernel" at 0xc055c000.
    Pentium Pro MTRR support enabled
    md0: Malloc disk
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <Host to PCI bridge> on motherboard
    pci0: <PCI bus> on pcib0
    pcib5: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0
    pci1: <PCI bus> on pcib5
    pci1: <ATI model 5954 graphics accelerator> at 5.0 irq 11
    pcib6: <PCI to PCI bridge (vendor=1002 device=5a37)> at device 5.0 on pci0
    pci2: <PCI bus> on pcib6
    bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4200> mem
    0xfdef0000-0xfdefffff irq 11 at device 0.0 on pci2
    bge0: Ethernet address: 00:13:d3:95:43:b9
    miibus0: <MII bus> on bge0
    brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
    brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
    1000baseTX-FDX, auto
    atapci0: <Generic PCI ATA controller> port
    0xec00-0xec0f,0xf000-0xf003,0xf400-0xf407,0xf800-0xf803,0xfc00-0xfc07
    mem 0xfe02f000-0xfe02f1ff irq 5 at device 18.0 on pci0
    ata2: at 0xfc00 on atapci0
    ata3: at 0xf400 on atapci0
    ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 10
    at device 19.0 on pci0
    usb0: OHCI version 1.0, legacy support
    usb0: SMM does not respond, resetting
    usb0: <OHCI (generic) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10
    at device 19.1 on pci0
    usb1: OHCI version 1.0, legacy support
    usb1: SMM does not respond, resetting
    usb1: <OHCI (generic) USB controller> on ohci1
    usb1: USB revision 1.0
    uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 4 ports with 4 removable, self powered
    pci0: <USB controller> at 19.2 irq 10
    pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0
    atapci1: <Generic PCI ATA controller> port
    0xe400-0xe40f,0-0x3,0-0x7,0-0x3,0-0x7 at device 20.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci1
    ata1: at 0x170 irq 15 on atapci1
    isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0
    isa0: <ISA bus> on isab0
    pcib7: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0
    pci3: <PCI bus> on pcib7
    pcib1: <Host to PCI bridge> on motherboard
    pci4: <PCI bus> on pcib1
    pcib2: <Host to PCI bridge> on motherboard
    pci5: <PCI bus> on pcib2
    pcib3: <Host to PCI bridge> on motherboard
    pci6: <PCI bus> on pcib3
    pcib4: <Host to PCI bridge> on motherboard
    pci7: <PCI bus> on pcib4
    orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
    pmtimer0 on isa0
    fdc0: ready for input in output
    fdc0: cmd 3 failed at out byte 1 of 3
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model IntelliMouse Explorer, device ID 4
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1: configured irq 3 not in bitmap of probed irqs 0
    ppc0: parallel port not found.
    ad4: DMA limited to UDMA33, non-ATA66 cable or device
    ad4: 38166MB <ST340014AS> [77545/16/63] at ata2-master BIOSDMA
    acd0: CDROM <LITE-ON CD-ROM LTN-489S> at ata0-master PIO4
    Mounting root from ufs:/dev/ad4s1a
    swapon: adding /dev/ad4s1b as swap device
    Automatic boot in progress...
    /dev/ad4s1a:
    FILESYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad4s1a:
    clean, 233536 free
    (808 frags, 29091 blocks, 0.3% fragmentation)
    /dev/ad4s1f:
    FILESYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad4s1f:
    clean, 17702306 free
    (66842 frags, 2204433 blocks, 0.4% fragmentation)
    /dev/ad4s1e:
    FILESYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad4s1e:
    clean, 515154 free
    (34 frags, 64390 blocks, 0.0% fragmentation)
    Doing initial network setup:
      hostname
    ..
    bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         options=3<RXCSUM,TXCSUM>
         inet 192.168.150.62 netmask 0xffffff00 broadcast 192.168.150.255
         inet6 fe80::213:d3ff:fe95:43b9%bge0 prefixlen 64 tentative scopeid 0x1
         ether 00:13:d3:95:43:b9
         media: Ethernet autoselect (none)
         status: no carrier
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
         inet 127.0.0.1 netmask 0xff000000
    add net default: gateway 192.168.150.1
    Additional routing options:
      TCP keepalive=YES
    ..
    Routing daemons:
    ..
    Additional daemons:
      syslogd
    ..
    Doing additional network setup:
    ..
    Starting final network daemons:
    ..
    ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
    a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
    Starting standard daemons:
      cron
      sshd
      usbd
    ..
    Initial rc.i386 initialization:
      apm
    ..
    Configuring syscons:
      blanktime
    ..
    Additional ABI support:
    ..
    Local package initialization:
    ..
    Additional TCP options:
    ..

    Tue Nov 1 12:51:32 PST 2005
    stray irq 7
    Nov 1 12:51:39 eons2 /kernel: stray irq 7
    stray irq 7
    Nov 1 12:51:39 eons2 /kernel: stray irq 7
    stray irq 7
    too many stray irq 7's; not logging any more
    Nov 1 12:53:14 eons2 /kernel: stray irq 7
    Nov 1 12:53:14 eons2 /kernel: too many stray irq 7's; not logging any more
    Nov 1 12:54:59 eons2 login: ROOT LOGIN (root) ON ttyv0

    *************************************
    ************************** fbsd5.4-APIC1.1
    *************************************
    /boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
    syms=[0x4+0x7670+0x4+0x9d05]
    SMAP type=01 base=0000000000000000 len=000000000009f800
    SMAP type=02 base=00000000000f0000 len=0000000000010000
    SMAP type=02 base=00000000fec00000 len=0000000001400000
    SMAP type=02 base=00000000e0000000 len=0000000010000000
    SMAP type=03 base=000000000eef3000 len=000000000000d000
    SMAP type=04 base=000000000eef0000 len=0000000000003000
    SMAP type=02 base=000000000009f800 len=0000000000000800
    SMAP type=01 base=0000000000100000 len=000000000edf0000
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
             The Regents of the University of California. All rights reserved.
    FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
         root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3621c.
    Table 'FACP' at 0xeef30c0
    Table 'SSDT' at 0xeef6780
    Table 'SRAT' at 0xeef6880
    Table '' at 0xeef6980
    Table 'ASF!' at 0xeef6a00
    Table 'APIC' at 0xeef66c0
    MADT: Found table at 0xeef66c0
    MP Configuration Table version 1.1 found at 0xc00f24f4
    APIC: Using the MADT enumerator.
    MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
    MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
    ACPI APIC Table: <HP AWRDACPI>
    Calibrating clock(s) ... i8254 clock: 1193222 Hz
    CLK_USE_I8254_CALIBRATION not specified - using default frequency
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Calibrating TSC clock ... TSC clock: 1790840677 Hz
    CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
       Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0

    Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
       AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
    Data TLB: 32 entries, fully associative
    Instruction TLB: 32 entries, fully associative
    L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
    L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
    associative
    L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
    real memory = 250544128 (238 MB)
    Physical memory chunk(s):
    0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
    0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
    0x0000000000c25000 - 0x000000000ea8bfff, 233205760 bytes (56935 pages)
    avail memory = 235614208 (224 MB)
    bios32: Found BIOS32 Service Directory header at 0xc00fab20
    bios32: Entry = 0xfb130 (c00fb130) Rev = 0 Len = 1
    pcibios: PCI BIOS entry at 0xf0000+0xb1a0
    pnpbios: Found PnP BIOS data at 0xc00fbc80
    pnpbios: Entry = f0000:bcb0 Rev = 1.0
    Other BIOS signatures found:
    APIC: CPU 0 has ACPI ID 0
    MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
    ioapic0: Routing external 8259A's -> intpin 0
    ioapic0: intpin 0 -> ExtINT (edge, high)
    ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
    ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
    ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
    ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
    ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
    ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
    ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
    ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
    ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
    ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
    ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
    ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
    ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
    ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
    ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
    ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
    ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
    ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
    ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
    ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
    ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
    ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
    ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
    MADT: Interrupt override: source 9, irq 21
    ioapic0: intpin 9 disabled
    ioapic0: intpin 21 trigger: level
    ioapic0: intpin 21 polarity: low
    lapic0: Routing NMI -> LINT1
    lapic0: LINT1 trigger: edge
    lapic0: LINT1 polarity: active-high
    MADT: Ignoring local NMI routed to ACPI CPU 1
    ioapic0 <Version 2.1> irqs 0-23 on motherboard
    cpu0

    *************************************
    ************************** fbsd5.4-APIC1.4
    *************************************
    /boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
    syms=[0x4+0x7670+0x4+0x9d05]
    SMAP type=01 base=0000000000000000 len=000000000009f800
    SMAP type=02 base=00000000000f0000 len=0000000000010000
    SMAP type=02 base=00000000fec00000 len=0000000001400000
    SMAP type=02 base=00000000e0000000 len=0000000010000000
    SMAP type=03 base=000000000eef3000 len=000000000000d000
    SMAP type=04 base=000000000eef0000 len=0000000000003000
    SMAP type=02 base=000000000009f800 len=0000000000000800
    SMAP type=01 base=0000000000100000 len=000000000edf0000
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
             The Regents of the University of California. All rights reserved.
    FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
         root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3621c.
    Table 'FACP' at 0xeef30c0
    Table 'SSDT' at 0xeef6780
    Table 'SRAT' at 0xeef6880
    Table '' at 0xeef6980
    Table 'ASF!' at 0xeef6a00
    Table 'APIC' at 0xeef66c0
    MADT: Found table at 0xeef66c0
    MP Configuration Table version 1.4 found at 0xc00f24f4
    APIC: Using the MADT enumerator.
    MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
    MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
    ACPI APIC Table: <HP AWRDACPI>
    Calibrating clock(s) ... i8254 clock: 1193226 Hz
    CLK_USE_I8254_CALIBRATION not specified - using default frequency
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Calibrating TSC clock ... TSC clock: 1790839408 Hz
    CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
       Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0

    Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
       AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
    Data TLB: 32 entries, fully associative
    Instruction TLB: 32 entries, fully associative
    L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
    L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
    associative
    L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
    real memory = 250544128 (238 MB)
    Physical memory chunk(s):
    0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
    0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
    0x0000000000c25000 - 0x000000000ea8bfff, 233205760 bytes (56935 pages)
    avail memory = 235614208 (224 MB)
    bios32: Found BIOS32 Service Directory header at 0xc00fab20
    bios32: Entry = 0xfb130 (c00fb130) Rev = 0 Len = 1
    pcibios: PCI BIOS entry at 0xf0000+0xb1a0
    pnpbios: Found PnP BIOS data at 0xc00fbc80
    pnpbios: Entry = f0000:bcb0 Rev = 1.0
    Other BIOS signatures found:
    APIC: CPU 0 has ACPI ID 0
    MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
    ioapic0: Routing external 8259A's -> intpin 0
    ioapic0: intpin 0 -> ExtINT (edge, high)
    ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
    ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
    ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
    ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
    ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
    ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
    ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
    ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
    ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
    ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
    ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
    ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
    ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
    ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
    ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
    ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
    ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
    ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
    ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
    ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
    ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
    ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
    ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
    MADT: Interrupt override: source 9, irq 21
    ioapic0: intpin 9 disabled
    ioapic0: intpin 21 trigger: level
    ioapic0: intpin 21 polarity: low
    lapic0: Routing NMI -> LINT1
    lapic0: LINT1 trigger: edge
    lapic0: LINT1 polarity: active-high
    MADT: Ignoring local NMI routed to ACPI CPU 1
    ioapic0 <Version 2.1> irqs 0-23 on motherboard
    cpu0 B

    *************************************
    ************************** fbsd5.4-noAPIC
    *************************************
    /boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
    syms=[0x4+0x7670+0x4+0x9d05]
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
             The Regents of the University of California. All rights reserved.
    FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
         root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
    mptable_probe: MP Config Table has bad signature:
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Sempron(tm) Processor 3000+ (1790.83-MHz 686-class CPU)
       Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0

    Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
       AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
    real memory = 250544128 (238 MB)
    avail memory = 235614208 (224 MB)
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <HP AWRDACPI> on motherboard
    acpi0: Power Button (fixed)
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
    cpu0: <ACPI CPU> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    pci1: <display, VGA> at device 5.0 (no driver attached)
    pcib2: <PCI-PCI bridge> at device 5.0 on pci0
    pci2: <PCI bus> on pcib2
    bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4200> mem
    0xfdef0000-0xfdefffff irq 11 at device 0.0 on pci2
    miibus0: <MII bus> on bge0
    brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
    brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
    1000baseTX-FDX, auto
    bge0: Ethernet address: 00:13:d3:95:43:b9
    atapci0: <GENERIC ATA controller> port
    0xec00-0xec0f,0xf000-0xf003,0xf400-0xf407,0xf800-0xf803,0xfc00-0xfc07
    irq 5 at device 18.0 on pci0
    ata2: channel #0 on atapci0
    ata3: channel #1 on atapci0
    ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 10
    at device 19.0 on pci0
    usb0: OHCI version 1.0, legacy support
    stray irq7
    usb0: SMM does not respond, resetting
    usb0: <OHCI (generic) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10
    at device 19.1 on pci0
    usb1: OHCI version 1.0, legacy support
    stray irq7
    usb1: SMM does not respond, resetting
    usb1: <OHCI (generic) USB controller> on ohci1
    usb1: USB revision 1.0
    uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 4 ports with 4 removable, self powered
    pci0: <serial bus, USB> at device 19.2 (no driver attached)
    pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
    atapci1: <GENERIC ATA controller> port
    0xe400-0xe40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
    ata0: channel #0 on atapci1
    ata1: channel #1 on atapci1
    isab0: <PCI-ISA bridge> at device 20.3 on pci0
    isa0: <ISA bus> on isab0
    pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
    pci3: <ACPI PCI bus> on pcib3
    acpi_tz0: <Thermal Zone> on acpi0
    sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
    acpi0
    sio0: type 16550A, console
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model IntelliMouse Explorer, device ID 4
    orm0: <ISA Option ROMs> at iomem
    0xd0000-0xd17ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    ppc0: parallel port not found.
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 1790834539 Hz quality 800
    Timecounters tick every 10.000 msec
    acd0: CDROM <LITE-ON CD-ROM LTN-489S/8QS4> at ata0-master PIO4
    ad4: 38166MB <ST340014AS/3.43> [77545/16/63] at ata2-master UDMA33
    Mounting root from ufs:/dev/ad4s1a
    Pre-seeding PRNG: kickstart.
    Loading configuration files.
    Entropy harvesting: interrupts ethernet point_to_point kickstart.
    swapon: adding /dev/ad4s1b as swap device
    Starting file system checks:
    /dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    Idev/ad4s1a: clWean, 230032 freeA (1512 frags, 28R565 blocks, 0.6%N
    fragmentation)
      N/dev/ad4s1e: DEFGER FOR BACKGROUN:D CHECKING
      /usr stray irq7
    was notstray irq7
      properltoo many stray irq 7's: not logging anymore
    y dismounted
    /dev/ad4s1d: DEFER FOR BACKGROUNWD CHECKING
    ARNING: /var was not properly dismounted

    Setting hostname: .
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
             inet 127.0.0.1 netmask 0xff000000
             inet6 ::1 prefixlen 128
             inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
    Additional routing options:.
    Starting devd.
    Mounting NFS file systems:.
    Starting syslogd.
    ELF ldconfig path: /lib /usr/lib /usr/lib/compat
    a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
    Starting local daemons:.
    Updating motd.
    Configuring syscons: blanktime.
    Initial i386 initialization:.
    Additional ABI support:.
    Starting cron.
    Local package initialization:.
    Additional TCP options:.
    Starting background file system checks in 60 seconds.

    Wed Nov 2 16:26:42 UTC 2005

    *************************************
    ************************** obsd3.7-legUSB
    *************************************
    booting fd0a:/bsd: 4302596+825452=0x4e40b8
    entry point at 0x100120
                            í
    Copyright (c) 1982, 1986, 1989, 1991, 1993
             The Regents of the University of California. All rights reserved.
    Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org

    OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
         deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
    cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class) 1.80 GHz
    cpu0:
    FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
    real mem = 250126336 (244264K)
    avail mem = 222449664 (217236K)
    using 3078 buffers containing 12607488 bytes (12312K) of memory
    mainbus0 (root)
    bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
    apm0 at bios0: Power Management spec V1.2
    apm0: APM engage (device 1): interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM system defaults failed: interface not connected (3)
    apm0: APM disconnect failed: interface not connected (3)
    pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
    pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
    pcibios0: bad IRQ table checksum
    pcibios0: PCI BIOS has 11 Interrupt Routing table entries
    pcibios0: PCI Exclusive IRQs: 5 10 11
    pcibios0: no compatible PCI ICU found
    pcibios0: Warning, unable to fix up PCI interrupt routing
    pcibios0: PCI bus #3 is the last bus
    WARNING: can't reserve area for I/O APIC.
    WARNING: can't reserve area for Local APIC.
    WARNING: can't reserve area for BIOS PROM.
    bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1800
    cpu0 at mainbus0
    pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
    pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5950 rev 0x01
    ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x5a3f rev 0x00
    pci1 at ppb0 bus 1
    vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x5954 rev 0x00
    wsdisplay0 at vga1: console (80x25, vt100 emulation)
    ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, unknown
    BCM5750 (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
    bge0: chip initialization failed
    pciide0 at pci0 dev 18 function 0 vendor "ATI", unknown product 0x4379
    rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel
    1 configured to native-PCI
    pciide0: using irq 5 for native-PCI interrupt
    wd0 at pciide0 channel 0 drive 0: <ST340014AS>
    wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
    pciide0: channel 1 ignored (not responding; disabled or no drives?)
    ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4374 rev
    0x00: irq 10, version 1.0, legacy support
    usb0 at ohci0: USB revision 1.0
    uhub0 at usb0
    uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4375 rev
    0x00: irq 10, version 1.0, legacy support
    usb1 at ohci1: USB revision 1.0
    uhub1 at usb1
    uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 4 ports with 4 removable, self powered
    ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4373 rev
    0x00: irq 10
    ehci0: EHCI version 1.0
    ehci0: companion controllers, 4 ports each: ohci0 ohci1
    usb2 at ehci0: USB revision 2.0
    uhub2 at usb2
    uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    uhub2: single transaction translator
    uhub2: 8 ports with 8 removable, self powered
    vendor "ATI", unknown product 0x4372 (class serial bus subclass SMBus,
    rev 0x10) at pci0 dev 20 function 0 not configured
    pciide1 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4376
    rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
    channel 1 wired to compatibility
    atapiscsi0 at pciide1 channel 0 drive 0
    scsibus0 at atapiscsi0: 2 targets
    cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
    5/cdrom removable
    pciide1: channel 1 ignored (not responding; disabled or no drives?)
    pcib0 at pci0 dev 20 function 3 vendor "ATI", unknown product 0x4377 rev
    0x00
    ppb2 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4371 rev 0x00
    pci3 at ppb2 bus 3
    pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
    pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
    pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
    pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
    isa0 at pcib0
    isadma0 at isa0
    pckbc0 at isa0 port 0x60/5
    kbc: cmd word write error
    npx0 at isa0 port 0xf0/16: using exception 16
    pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
    pccom0: console
    biomask f7ef netmask ffef ttymask ffef
    rd0: fixed, 3800 blocks
    root on rd0a
    rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

    *************************************
    ************************** obsd3.7-nolegUSB
    *************************************
    >> OpenBSD/i386 BOOT 2.06
    boot>
    booting hd0a:/bsd: 4686240+945680 [52+241328+223324]=0x5d0864
    entry point at 0x100120
                            í
    [ using 465076 bytes of bsd ELF symbol table ]
    Copyright (c) 1982, 1986, 1989, 1991, 1993
             The Regents of the University of California. All rights reserved.
    Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org

    OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
         deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
    cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class) 1.80 GHz
    cpu0:
    FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
    real mem = 233349120 (227880K)
    avail mem = 206032896 (201204K)
    using 2874 buffers containing 11771904 bytes (11496K) of memory
    mainbus0 (root)
    bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
    apm0 at bios0: Power Management spec V1.2
    apm0: APM engage (device 1): interface not connected (3)
    apm0: AC on, battery charge unknown
    apm0: APM set CPU busy: interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM system defaults failed: interface not connected (3)
    apm0: APM disconnect failed: interface not connected (3)
    pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
    pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
    pcibios0: bad IRQ table checksum
    pcibios0: PCI BIOS has 11 Interrupt Routing table entries
    pcibios0: PCI Exclusive IRQs: 5 10 11
    pcibios0: no compatible PCI ICU found
    pcibios0: Warning, unable to fix up PCI interrupt routing
    pcibios0: PCI bus #3 is the last bus
    WARNING: can't reserve area for I/O APIC.
    WARNING: can't reserve area for Local APIC.
    WARNING: can't reserve area for BIOS PROM.
    bios0: ROM list: 0xc0000/0xc000
    cpu0 at mainbus0
    pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
    pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5950 rev 0x01
    ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x5a3f rev 0x00
    pci1 at ppb0 bus 1
    vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x5954 rev 0x00
    wsdisplay0 at vga1: console (80x25, vt100 emulation)
    wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
    ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, unknown
    BCM5750 (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
    bge0: chip initialization failed
    pciide0 at pci0 dev 18 function 0 vendor "ATI", unknown product 0x4379
    rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel
    1 configured to native-PCI
    pciide0: using irq 5 for native-PCI interrupt
    wd0 at pciide0 channel 0 drive 0: <ST340014AS>
    wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
    pciide0: channel 1 ignored (not responding; disabled or no drives?)
    ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4374 rev
    0x00: irq 10, version 1.0, legacy support
    usb0 at ohci0: USB revision 1.0
    uhub0 at usb0
    uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4375 rev
    0x00: irq 10, version 1.0, legacy support
    usb1 at ohci1: USB revision 1.0
    uhub1 at usb1
    uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 4 ports with 4 removable, self powered
    ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4373 rev
    0x00: irq 10
    ehci0: EHCI version 1.0
    ehci0: companion controllers, 4 ports each: ohci0 ohci1
    usb2 at ehci0: USB revision 2.0
    uhub2 at usb2
    uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    uhub2: single transaction translator
    uhub2: 8 ports with 8 removable, self powered
    vendor "ATI", unknown product 0x4372 (class serial bus subclass SMBus,
    rev 0x10) at pci0 dev 20 function 0 not configured
    pciide1 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4376
    rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
    channel 1 wired to compatibility
    atapiscsi0 at pciide1 channel 0 drive 0
    scsibus0 at atapiscsi0: 2 targets
    cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
    5/cdrom removable
    pciide1: channel 1 ignored (not responding; disabled or no drives?)
    pcib0 at pci0 dev 20 function 3 vendor "ATI", unknown product 0x4377 rev
    0x00
    ppb2 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4371 rev 0x00
    pci3 at ppb2 bus 3
    pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
    pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
    pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
    pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
    isa0 at pcib0
    isadma0 at isa0
    pckbc0 at isa0 port 0x60/5
    pckbd0 at pckbc0 (kbd slot)
    pckbc0: using irq 1 for kbd slot
    wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
    wsdisplay0
    pmsi0 at pckbc0 (aux slot)
    pckbc0: using irq 12 for aux slot
    wsmouse0 at pmsi0 mux 0
    pcppi0 at isa0 port 0x61
    midi0 at pcppi0: <PC speaker>
    sysbeep0 at pcppi0
    npx0 at isa0 port 0xf0/16: using exception 16
    pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
    pccom0: console
    biomask e7ed netmask efed ttymask ffef
    pctr: user-level cycle counter enabled
    dkcsum: wd0 matched BIOS disk 80
    root on wd0a
    rootdev=0x0 rrootdev=0x300 rawdev=0x302
    Automatic boot in progress: starting file system checks.
    /dev/rwd0a: file system is clean; not checking
    /dev/rwd0e: file system is clean; not checking
    /dev/rwd0d: file system is clean; not checking
    setting tty flags
    starting network
    starting system logger
    starting rpc daemons:.
    savecore: no core dump
    checking quotas: done.
    building ps databases: kvm dev.
    clearing /tmp
    starting pre-securelevel daemons:.
    setting kernel security level: kern.securelevel: 0 -> 1
    creating runtime link editor directory cache.
    preserving editor files
    starting network daemons: sendmail inetd sshd.
    starting local daemons:.
    standard daemons: cron.
    Tue Nov 1 07:22:24 PST 2005

    *************************************
    ************************** obsd3.8-legUSB
    *************************************
    booting hd0a:/bsd: 4804352+939504 [52+247280+228802]=0x5eea4c
    entry point at 0x100120
                            í
    [ using 476508 bytes of bsd ELF symbol table ]
    Copyright (c) 1982, 1986, 1989, 1991, 1993
             The Regents of the University of California. All rights reserved.
    Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org

    OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
         deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
    cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 128KB
    L2 cache) 1.80 GHz
    cpu0:
    FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
    cpu0: AMD Powernow: FID VID TTP TM
    real mem = 233349120 (227880K)
    avail mem = 205914112 (201088K)
    using 2874 buffers containing 11771904 bytes (11496K) of memory
    mainbus0 (root)
    bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
    apm0 at bios0: Power Management spec V1.2
    apm0: APM engage (device 1): interface not connected (3)
    apm0: AC on, battery charge unknown
    apm0: APM get event: interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM system defaults failed: interface not connected (3)
    apm0: APM disconnect failed: interface not connected (3)
    apm0: flags 70102 dobusy 0 doidle 0
    pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
    pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
    pcibios0: bad IRQ table checksum
    pcibios0: PCI BIOS has 11 Interrupt Routing table entries
    pcibios0: PCI Exclusive IRQs: 5 10 11
    pcibios0: no compatible PCI ICU found
    pcibios0: Warning, unable to fix up PCI interrupt routing
    pcibios0: PCI bus #3 is the last bus
    WARNING: can't reserve area for I/O APIC.
    WARNING: can't reserve area for Local APIC.
    WARNING: can't reserve area for BIOS PROM.
    bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
    cpu0 at mainbus0
    pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
    pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
    ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
    pci1 at ppb0 bus 1
    vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
    wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
    wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
    ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
    (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
    bge0: chip initialization failed
    pciide0 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x00: DMA
    pciide0: using irq 5 for native-PCI interrupt
    pciide0: port 0: device present, speed: 1.5Gb/s
    wd0 at pciide0 channel 0 drive 0: <ST340014AS>
    wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
    wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
    ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 10,
    version 1.0, legacy support

    *************************************
    ************************** obsd3.8-nolegUSB
    *************************************
    booting hd0a:/bsd: 4804352+939504 [52+247280+228802]=0x5eea4c
    entry point at 0x100120
                            í
    [ using 476508 bytes of bsd ELF symbol table ]
    Copyright (c) 1982, 1986, 1989, 1991, 1993
             The Regents of the University of California. All rights reserved.
    Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org

    OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
         deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
    cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 128KB
    L2 cache) 1.80 GHz
    cpu0:
    FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
    cpu0: AMD Powernow: FID VID TTP TM
    real mem = 233349120 (227880K)
    avail mem = 205914112 (201088K)
    using 2874 buffers containing 11771904 bytes (11496K) of memory
    mainbus0 (root)
    bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
    apm0 at bios0: Power Management spec V1.2
    apm0: APM engage (device 1): interface not connected (3)
    apm0: AC on, battery charge unknown
    apm0: APM get event: interface not connected (3)
    apm0: APM get event: interface not connected (3)
    apm0: APM system defaults failed: interface not connected (3)
    apm0: APM disconnect failed: interface not connected (3)
    apm0: flags 70102 dobusy 0 doidle 0
    pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
    pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
    pcibios0: bad IRQ table checksum
    pcibios0: PCI BIOS has 11 Interrupt Routing table entries
    pcibios0: PCI Exclusive IRQs: 5 10 11
    pcibios0: no compatible PCI ICU found
    pcibios0: Warning, unable to fix up PCI interrupt routing
    pcibios0: PCI bus #3 is the last bus
    WARNING: can't reserve area for I/O APIC.
    WARNING: can't reserve area for Local APIC.
    WARNING: can't reserve area for BIOS PROM.
    bios0: ROM list: 0xc0000/0xc000
    cpu0 at mainbus0
    pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
    pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
    ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
    pci1 at ppb0 bus 1
    vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
    wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
    wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
    ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
    (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
    bge0: chip initialization failed
    pciide0 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x00: DMA
    pciide0: using irq 5 for native-PCI interrupt
    pciide0: port 0: device present, speed: 1.5Gb/s
    wd0 at pciide0 channel 0 drive 0: <ST340014AS>
    wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
    wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
    ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 10,
    version 1.0, legacy support
    usb0 at ohci0: USB revision 1.0
    uhub0 at usb0
    uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 10,
    version 1.0, legacy support
    usb1 at ohci1: USB revision 1.0
    uhub1 at usb1
    uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
    uhub1: 4 ports with 4 removable, self powered
    ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 10
    usb2 at ehci0: USB revision 2.0
    uhub2 at usb2
    uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
    uhub2: 8 ports with 8 removable, self powered
    "ATI IXP400 SMBus" rev 0x10 at pci0 dev 20 function 0 not configured
    pciide1 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA
    (unsupported), channel 0 configured to compatibility, channel 1 wired to
    compatibility
    atapiscsi0 at pciide1 channel 0 drive 0
    scsibus0 at atapiscsi0: 2 targets
    cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
    5/cdrom removable
    pciide1: channel 1 ignored (not responding; disabled or no drives?)
    pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
    ppb2 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
    pci3 at ppb2 bus 3
    pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
    pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
    pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
    pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
    isa0 at pcib0
    isadma0 at isa0
    pckbc0 at isa0 port 0x60/5
    pckbd0 at pckbc0 (kbd slot)
    pckbc0: using irq 1 for kbd slot
    wskbd0 at pckbd0: console keyboard, using wsdisplay0
    pmsi0 at pckbc0 (aux slot)
    pckbc0: using irq 12 for aux slot
    wsmouse0 at pmsi0 mux 0
    pcppi0 at isa0 port 0x61
    midi0 at pcppi0: <PC speaker>
    spkr0 at pcppi0
    sysbeep0 at pcppi0
    npx0 at isa0 port 0xf0/16: using exception 16
    pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
    pccom0: console
    biomask e7ed netmask efed ttymask ffef
    pctr: user-level cycle counter enabled
    dkcsum: wd0 matches BIOS drive 0x80
    root on wd0a
    rootdev=0x0 rrootdev=0x300 rawdev=0x302
    Automatic boot in progress: starting file system checks.
    /dev/rwd0a: file system is clean; not checking
    /dev/rwd0e: file system is clean; not checking
    /dev/rwd0d: file system is clean; not checking
    setting tty flags
    starting network
    starting system logger
    starting rpc daemons:.
    savecore: no core dump
    checking quotas: done.
    building ps databases: kvm dev.
    clearing /tmp
    starting pre-securelevel daemons:.
    setting kernel security level: kern.securelevel: 0 -> 1
    creating runtime link editor directory cache.
    preserving editor files
    starting network daemons: sendmail inetd sshd.
    starting local daemons:.
    standard daemons: cron.
    Tue Nov 1 07:42:37 PST 2005

  • Next message: Helmut Schneider: "managing pf rules and logfiles"