OpenBSD 3.9 and simh.

I'm trying to install OpenBSD on Simh.
But (after installing the OS) hd reboot I obtain always the same error:

rootdev=0x900 rrootdev=0x900 rawdev=0x902
filesystem type 0 not known.. assuming ffs
panic: cannot mount root

this is simh configuration file I'm using:
set cpu 32m
set cpu conhalt
set tto 7b
set tti 7b
deposit rq time 100

load -r ka655x.bin

;; enable this after the initial install and
;; issue the command
;; set boot dua0:
;; at the chevron prompt
;at nvr nvr.bin

set rq0 ra92
at rq0 ra92-openbsd.dsk


;set rq1 ra82
;at rq1 /dev/null

;set rq2 ra82
;at rq2 /dev/null

;set rq3 ra82
;at rq3 /dev/null

;set tq tk50
;at tq0 openbsd.tap

set dz 7b
set dz lines=8
at -m dz0 2311

set xq mac=08-00-2b-24-72-00
at xq0 eth0

set lpt dis
set ts dis
set rl dis

;; uncomment the next three lines after the NVRAM
;; has been attached and the default boot device set
;dep bdr 0
;boot cpu
;exit



and this is the complete typescript of the session:
Script started on Sun Jan 7 14:58:30 2007
# ./vax vax.txt

VAX simulator V3.6-1
Invalid argument
Listening on port 2311 (socket 5)
Modem control activated
Eth: opened fxp0
sim> boot cpu


KA655-B V5.3, VMB 2.7
1) Dansk
2) Deutsch (Deutschland/Vsterreich)
3) Deutsch (Schweiz)
4) English (United Kingdom)
5) English (United States/Canada)
6) Espaqol
7) Frangais (Canada)
8) Frangais (France/Belgique)
9) Frangais (Suisse)
10) Italiano
11) Nederlands
12) Norsk
13) Portugujs
14) Suomi
15) Svenska
(1..15): 5
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
boot dua0:
(BOOT/R5:0 DUA0



2..
-DUA0
1..0..


OpenBSD/vax boot [1.9] [Mar 1 2006] <<
Press enter to autoboot now, or any other key to abort: 54
boot bsd
total=0x210b01 start=0x8000057c
[ using 243613 bytes of bsd a.out symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.9 (GENERIC) #293: Thu Mar 2 02:54:54 MST 2006
deraadt@xxxxxxxxxxxxxxx:/usr/src/sys/arch/vax/compile/GENERIC
MicroVAX 3800/3900 [0A000006 01530302]
cpu: KA655, CVAX microcode rev 6 Firmware rev 83
total memory = 33488896
avail memory = 27353088
using 434 buffers containing 1777664 bytes of memory
mainbus0 (root)
ibus0 at mainbus0
uba0 at ibus0: Q22
dz0 at uba0 csr 160100 vec 196 ipl 15
mtc0 at uba0 csr 174500 vec 508 ipl 15
mscpbus0 at mtc0: version 5 model 3
mscpbus0: DMA burst size set to 4
mt0 at mscpbus0 drive 0: TK50
mt1 at mscpbus0 drive 1: TK50
mt2 at mscpbus0 drive 2: TK50
mt3 at mscpbus0 drive 3: TK50
uda0 at uba0 csr 172150 vec 504 ipl 15
mscpbus1 at uda0: version 3 model 3
mscpbus1: DMA burst size set to 4
ra0 at mscpbus1 drive 0: RA92
ra1 at mscpbus1 drive 1: RD54
ra2 at mscpbus1 drive 2: RD54
rx0 at mscpbus1 drive 3: RX50
qe0 at uba0 csr 174440 vec 500 ipl 15: delqa, address 08:00:2b:24:72:00
booted from device: ra0
root on ra0a
rootdev=0x900 rrootdev=0x900 rawdev=0x902
filesystem type 0 not known.. assuming ffs
panic: cannot mount root
Stopped at _main+0x440: movl _mountlist, r0
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
panic: cannot mount root
Stack traceback :
_start+0x519(0x3ae120)
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
2 0 0 0 3 0x100204 pftm pfpurge
1 0 0 0 3 0x4 initexec swapper
* 0 -1 0 0 7 0x80204 swapper
ddb>
Simulation stopped, PC: 80175885 (BGEQ 80175880)
sim> q
Goodbye
# ^D

Script done on Sun Jan 7 14:59:10 2007



----
Thank You very much




.

Relevant Pages

  • Re: IBM / FreeBSD Install problem
    ... We have attempted various modifications to the boot process, ... When we attempt to boot to OS to install after making these above ... message "cpu id 38 too high". ... ACPI disabled, this message dissapears. ...
    (freebsd-questions)
  • Re: IBM / FreeBSD Install problem
    ... We have attempted various modifications to the boot process, ... When we attempt to boot to OS to install after making these above ... message "cpu id 38 too high". ... ACPI disabled, this message dissapears. ...
    (freebsd-hackers)
  • RE: IBM / FreeBSD Install problem
    ... IBM / FreeBSD Install problem ... We are attempting to install FreeBSD 6.2-RELEASE onto ... When we attempt to boot to OS to install after making ... message "cpu id 38 too high". ...
    (freebsd-questions)
  • Re: Install Problem at GUI Startup
    ... If I select ACPI Multiprocessor and install only one CPU, ... directory or trying to boot from a directory other than the root. ... I am using the non promise controller exactly as you suggest. ...
    (microsoft.public.windows.server.sbs)
  • Re: IBM / FreeBSD Install problem
    ... We have attempted various modifications to the boot process, ... When we attempt to boot to OS to install after making these above ... message "cpu id 38 too high". ... Dave Faulkner / Murray Taylor ...
    (freebsd-questions)