Re: help required
- From: markhobley@xxxxxxxxxxxxxxxxxxxxxxxx (Mark Hobley)
- Date: Sun, 15 Jan 2006 10:08:29 GMT
shady <shadab.farrukh@xxxxxxxxx> wrote:
> by controlling the pc i mean to control it right from power on to
> shutting down the pc also to run any excutable on my pc and all this
> has to be done through cell phone.
Ok. That's no clearer.
Do you want to be able to dial a number to switch on the pc?
There is a hardware device that enables this.
You now want to be able to obtain a telnet session from the mobile phone.
The PC will do this no problem. Are you connecting via the internet, or via a
modem?
I don't know anything about mobile phones. If you are connecting via the
internet, you will need a telnet client on your phone. If you are connecting
via a modem, you will need a terminal emulator. If you are connecting via a
modem, you will need to reconfigure your mobile phone to dial your modem
number instead of your internet service provider.
Shutdown of the PC.
This can be done from the telnet session.
Post follow ups on the progress you are making.
Regards,
Mark.
--
Mark Hobley
393 Quinton Road West
QUINTON
Birmingham
B32 1QE
Telephone: (0121) 247 1596
International: 0044 121 247 1596
Email: markhobley at hotpop dot donottypethisbit com
http://markhobley.yi.org/
.
- Follow-Ups:
- Re: help required
- From: shady
- Re: help required
- References:
- help required
- From: shady
- Re: help required
- From: Bill Marcum
- Re: help required
- From: shady
- help required
- Prev by Date: Re: help required
- Next by Date: Cross compiling from solaris x86 to sparc?
- Previous by thread: Re: help required
- Next by thread: Re: help required
- Index(es):
Relevant Pages
|
