Re: Configuring speed for SCO OpenServer

From: Tony Lawrence (foo_at_pcunix.com)
Date: 03/30/05 

Date: Wed, 30 Mar 2005 15:51:12 -0500

NSM wrote:
> "Tony Lawrence" <foo@pcunix.com> wrote in message
> news:C8adnfNb7K46ldbfRVn-qA@comcast.com...
>
>>NSM wrote:
>>
>>>For SCO OpenServer Release 5.0.6 and a US Robotics Sportster 56K
>
> external
>
>>>modem, what is the maximum speed that can be configured and what
>
> settings
>
>>>are best to use?
>>>
>>
>>57600 is the answer to both assuming the serial port isn't some really
>>ancient piece of junk.
>>
>>See http://aplawrence.com/Unixart/hispeed.html
>
>
> Thanks. No, it's a Compaq 66 MHz all SCSI system. Should do that speed fine.
> Time to transfer the files and shut her down.
>

It's not the speed of the machine, it's the chip set in the serial port.. 

-- 
Tony Lawrence
Unix/Linux/Mac OS X  resources: http://aplawrence.com

Relevant Pages

  • RS232 Redirector Program in C using Linux
    ... developing linux aps as well as in the serial port), ... failed to get current settings ... the int handler ... nbytes = write; ...
    (comp.os.linux.development.apps)
  • Re: Serial port communications with iPaq; max baud rate ?
    ... Making custom settings... ... //Init the device control block (for serial port) ... > I'm connecting a microcontroller to the iPaq using the serial port (I ...
    (microsoft.public.windowsce.embedded.vc)
  • Re: Ultra 60 wont boot - displays garbage on serial port
    ... The other, which is set up identically, will not boot. ... I plugged the terminal into the good U60 and everything came out ttya without a problem. ... tried a large number of different terminal settings (baud, bit length, ... If it is some obscure serial port setting, ...
    (comp.sys.sun.hardware)
  • Re: Local Printing with IE
    ... the settings configured in IE come up as the defaults in my program when I ... I've also tried printing to a network printer and the same result occurs: ... Windows CE control panel --> Printers to the same serial port? ...
    (microsoft.public.windowsce.platbuilder)
  • Woody serial mouse problems solved in BIOS?
    ... I see some reference to port settings as the boot messages appear, ... You can change the IRQ and address of each serial port setting in Woody using ... last lines of the file manually, and check them against what the BIOS is ... use a symlink '/dev/mouse' ... ...
    (Debian-User)