c8xx hba open unix 8
From: Ron Kirschner (ron_at_jedron.com)
Date: 03/31/05
- Next message: fernando.scheid_at_gmail.com: "Re: Routing Problem on OpenServer 5.0.6"
- Previous message: brian_at_aljex.com: "Re: Configuring speed for SCO OpenServer"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Thu, 31 Mar 2005 05:58:28 -0500
I installed a couple of Open Unix 8.0.0 UnixWare systems 3 years ago, and
support for this version seems to have disappeared from SCO's website.
Both installs were on HP TC4100 systems using Symbios 53c8xx SCSI
controller - HBA package c8xx.
Both of these systems get SCSI errors with dat tape drives, often resulting
in system hangs.
for example: cpio -icuvdm < /dev/rct0 always hangs the systems while dd
if=/dev/rct0 | cpio -icuvdm does not.
one of the system hangs at least once a week after the tape backup
completes, while the tape is rewinding!
I have been looking for updated firmware or HBA without luck.
Does anyone know of a fix for this?
- Next message: fernando.scheid_at_gmail.com: "Re: Routing Problem on OpenServer 5.0.6"
- Previous message: brian_at_aljex.com: "Re: Configuring speed for SCO OpenServer"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|