Re: In search of Parallel and serial cards for Openserver 6

From: Bob Stockler (bob_at_trebor.iglou.com)
Date: 09/24/05


Date: 24 Sep 2005 15:32:52 -0400

Boss wrote (on Sat, Sep 24, 2005 at 02:48:39PM -0400):

| I am in need of an additional serial port and an additional parallel
| port on an OSR6 server I just installed. The motherboard has PCI and
| PCIX-1 slots available. I had planned on using USB for the printer, but
| (as you may already know) OSR USB printing is still not ready for primetime.
|
| I know the Digi NEO 2-port DB9 card supports OSR5 and I have used SIIG
| PCI parallel ports on OSR5.0.7.
|
| I have already tried two PCI parallel ports and neither are recognized
| by the OS. A hw -r pci report shows one as a "Simple communications
| controller" and the other as a "Simple 16550 controller" which are
| wrong. 16550, after all, is a serial UART chip.
|
| Has anyone tried a 1 or 2 port serial, a 1 port parallel or a combo PCI
| card with OSR6.

The Digi Neo ports do NOT work on OpenServer 6. And Digi says
the Digi model shown on the OSR 6 hardware combatibility list
does NOT work on it either.

Bob

-- 
Bob Stockler  +-+  bob@trebor.iglou.com  +-+  http://members.iglou.com/trebor
Author: MENU EDIT II - The BEST Creator/Editor/Manager for filePro User Menus.
Fully functional (time-limited) demos available by email request (specify OS).


Relevant Pages

  • In search of Parallel and serial cards for Openserver 6
    ... I am in need of an additional serial port and an additional parallel ... port on an OSR6 server I just installed. ... PCI parallel ports on OSR5.0.7. ... I have already tried two PCI parallel ports and neither are recognized ...
    (comp.unix.sco.misc)
  • Re: AHCI - remove probing of ata2
    ... ACPI: bus type pci registered ... registered new interface driver hub ... USB Universal Host Controller Interface driver v3.0 ... hub 1-0:1.0: 2 ports detected ...
    (Linux-Kernel)
  • Re: 2.6.19-rc4-mm2: ahci: probe of 0000:00:1f.2 failed with error -16
    ... Any idea (ahci, pci)? ... ACPI: Local APIC address 0xfee00000 ... NetLabel: Initializing ... ports already in use, ...
    (Linux-Kernel)
  • Re: PUC rewrite
    ... platforms to RELENG_7 and noticed that support for the 3Com PCI ... However, if I have the 3com PCI modem installed, cuau0 becomes the modem and I am not able to login via the console ... irq 10 at device 14.0 on pci0 ... usb1: companion controller, 4 ports each: usb0 ...
    (freebsd-current)
  • RE: IRQ Conflicts / Crashing.... a little more info.
    ... PCI devices are the Firewire/USB card and a modem. ... I've tried it on the MoBo ports and the PCI ports. ... > A further bit of possibly relevant information: My wireless USB antenna ...
    (microsoft.public.windowsxp.perform_maintain)