comp.unix.sco.misc

• Thread Index

---

• Re: Problem installing gnutools5.0.7kj on 5.0.7 with MP5
  • From: Boyd Lynn Gerber
• Problem installing gnutools5.0.7kj on 5.0.7 with MP5
  • From: Steve M. Fabac, Jr.
• SCO Open server on MS Vitural Server RS2
  • From: Barkingmadscot
• CANNOT INSTALL SCO 5.0.6 ON IBM X206 - DRIVER IPSRAID
  • From: Bruno
• Re: Pressed vs Burned CD
  • From: Bob Bailin
• Re: OT: Pressed vs Burned CD
  • From: Bill Vermillion
• Re: OT: Pressed vs Burned CD
  • From: fabiog@xxxxxxxxxx
• OT: Pressed vs Burned CD
  • From: Dave Dickerson
• Re: popper/corrupt email
  • From: fabiog@xxxxxxxxxx
• Re: lpstat cancel question
  • From: Jeff Hyman
• Re: lpstat cancel question
  • From: Jean-Pierre Radley
• Re: HELP; i need a remote printer
  • From: RedGrittyBrick
• lpstat cancel question
  • From: Jeff Hyman
• Apparent logoff's due to inactivity.
  • From: gadgetman
• HELP; i need a remote printer
  • From: jeronimo
• popper/corrupt email
  • From: Dave Burris
• Re: slink boot error in OpenServer 3
  • From: Tom
• Re: 73 GB scsi, 5.0.5, blad: fdisk sees a 4 GB drive
  • From: Pat Welch
• Re: More on Spamassassin on SCO 5.0.7 with MP5
  • From: Stephen M. Dunn
• Re: More on Spamassassin on SCO 5.0.7 with MP5
  • From: Boyd Lynn Gerber
• Re: More on Spamassassin on SCO 5.0.7 with MP5
  • From: Steve M. Fabac, Jr.
• Re: Mozilla 1.7.13 Mail & Newsgroups window on OSR6
  • From: Roger Cornelius
• Re: LP command syntax question
  • From: Brian K. White
• Re: 73 GB scsi, 5.0.5, blad: fdisk sees a 4 GB drive
  • From: Dan Martin
• Re: 73 GB scsi, 5.0.5, blad: fdisk sees a 4 GB drive
  • From: fabiog@xxxxxxxxxx
• 73 GB scsi, 5.0.5, blad: fdisk sees a 4 GB drive
  • From: Dan Martin
• Re: More on Spamassassin on SCO 5.0.7 with MP5
  • From: Bela Lubkin
• Re: LP command syntax question
  • From: Steve M. Fabac, Jr.
• More on Spamassassin on SCO 5.0.7 with MP5
  • From: Steve M. Fabac, Jr.
• Re: Problem with Skunkware procmail 3.1.5 & 5.0.7 MP5
  • From: Steve M. Fabac, Jr.
• Re: Problem with Skunkware procmail 3.1.5 & 5.0.7 MP5
  • From: Boyd Lynn Gerber
• Re: Problem with Skunkware procmail 3.1.5 & 5.0.7 MP5
  • From: Steve M. Fabac, Jr.
• Re: LP command syntax question
  • From: Scott McMillan
• Re: LP command syntax question
  • From: David G
• Re: LP command syntax question
  • From: Ian Wilson
• Re: Problem with Skunkware procmail 3.1.5 & 5.0.7 MP5
  • From: Boyd Lynn Gerber
• Problem with Skunkware procmail 3.1.5 & 5.0.7 MP5
  • From: Steve M. Fabac, Jr.
• Re: Anyone know where the slides for the SCO Forum 2006 are?
  • From: Andreas Kohl
• Re: LP command syntax question
  • From: Bob Rasmussen
• Re: LP command syntax question
  • From: Scott McMillan
• Anyone know where the slides for the SCO Forum 2006 are?
  • From: carl@xxxxxxxxxxxxx
• Re: LP command syntax question
  • From: David G
• Re: Printer Question
  • From: scott
• Re: 2 Hdd - one boot new SCO and the other old SCO
  • From: John DuBois
• Re: LP command syntax question
  • From: ThreeStar
• Re: LP command syntax question
  • From: Bob Rasmussen
• Re: LP command syntax question
  • From: Scott McMillan
• Re: 2 Hdd - one boot new SCO and the other old SCO
  • From: Scott McMillan
• Re: Moving hardware to a new server
  • From: Scott McMillan
• Re: LP command syntax question
  • From: David G
• Re: LP command syntax question
  • From: Bob Rasmussen
• LP command syntax question
  • From: David G
• Re: Moving hardware to a new server
  • From: javabean04
• Re: 2 Hdd - one boot new SCO and the other old SCO
  • From: 1und1
• Re: 2 Hdd - one boot new SCO and the other old SCO
  • From: John DuBois
• qpopper 4.0.8
  • From: fabiog@xxxxxxxxxx
• Re: Printer Question
  • From: Pat Welch
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Printer Question
  • From: Curt
• Re: 2 Hdd - one boot new SCO and the other old SCO
  • From: Bill Vermillion
• Re: Wyse150 terminals revert to old settings at login
  • From: Bob Bailin
• Re: Moving hardware to a new server
  • From: Bob Bailin
• Re: Wyse150 terminals revert to old settings at login
  • From: Bill Vermillion
• Re: Wyse150 terminals revert to old settings at login
  • From: billa
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Wyse150 terminals revert to old settings at login
  • From: billa
• 2 Hdd - one boot new SCO and the other old SCO
  • From: 1und1
• Re: Moving hardware to a new server
  • From: Ian Wilson
• Re: Moving hardware to a new server
  • From: Steve M. Fabac, Jr.
• Re: Moving hardware to a new server
  • From: akhan
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Moving hardware to a new server
  • From: Walter Vaughan
• Moving hardware to a new server
  • From: javabean04
• Re: Wyse150 terminals revert to old settings at login
  • From: Roger Cornelius
• Unixware 7.1.4 and Adaptec 2120s
  • From: fabiog@xxxxxxxxxx
• Remove my address from mail list: How to?
  • From: Richard
• slink boot error in OpenServer 3
  • From: Tom
• Re: Wyse150 terminals revert to old settings at login
  • From: Ian Wilson
• Re: Wyse150 terminals revert to old settings at login
  • From: Ian Wilson
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Wyse150 terminals revert to old settings at login
  • From: Roger Cornelius
• Re: Wyse150 terminals revert to old settings at login
  • From: Bob Rasmussen
• Re: Wyse150 terminals revert to old settings at login
  • From: Roger Cornelius
• Re: Wyse150 terminals revert to old settings at login
  • From: ThreeStar
• Re: Wyse150 terminals revert to old settings at login
  • From: Bill Vermillion
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: Wyse150 terminals revert to old settings at login
  • From: Bill Vermillion
• Re: Wyse150 terminals revert to old settings at login
  • From: ThreeStar
• Wyse150 terminals revert to old settings at login
  • From: lansman54
• Re: sendmail : .forward and keeping copy
  • From: B...@xxxxxxxxx
• Re: USB hard drive for backup
  • From: pisymbol
• Re: nmap for openserver
  • From: Joe Dunning
• Vegas Show
  • From: Jeff Hyman
• Re: nmap for openserver
  • From: ThreeStar
• USB hard drive for backup
  • From: scamper
• Re: netcat, rlpr, Net printer interface script
  • From: Bela Lubkin
• Re: netcat, rlpr, Net printer interface script
  • From: Pat Welch
• Re: netcat, rlpr, Net printer interface script
  • From: Brian K. White
• netcat, rlpr, Net printer interface script
  • From: Brian K. White
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Bill Vermillion
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Brian K. White
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Tony Lawrence
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: billa
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Tony Lawrence
• Re: Apache 2.0.50 SCO Unix osr 5
  • From: Rick
• Re: Apache 2.0.50 SCO Unix osr 5
  • From: mbennett
• Re: CPU2: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Bob Bailin
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: sarahbeattie101
• Re: CPU2: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: sarahbeattie101
• Re: nmap for openserver
  • From: Bill Vermillion
• Re: nmap for openserver
  • From: John DuBois
• Re: nmap for openserver
  • From: Boyle M. Owl
• Re: nmap for openserver
  • From: Brian K. White
• Re: nmap for openserver
  • From: Joe Dunning
• Obtaining duplex link status
  • From: Michael Mullay
• Re: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: JP
• Re: CPU2: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Pat Welch
• Apache 2.0.50 SCO Unix osr 5
  • From: Martin
• Re: nmap for openserver
  • From: Brian K. White
• Re: nmap for openserver
  • From: Joe Dunning
• Re: nmap for openserver
  • From: ThreeStar
• Re: CPU2: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: Bill Vermillion
• CPU2: NOTICE: Sdsk: Unrecoverable error writing SCSI disk
  • From: sarahbeattie101
• Re: VisionFS upgrade
  • From: Richard
• Re: Com 1 sticks at 2400 baud
  • From: Flip
• Re: printerserver
  • From: Brian K. White
• Re: VisionFS upgrade
  • From: Scott McMillan
• Re: printerserver
  • From: Tony Lawrence
• Re: VisionFS upgrade
  • From: M Fuller
• Re: VisionFS upgrade
  • From: Scott McMillan
• VisionFS upgrade
  • From: M Fuller
• Re: Com 1 sticks at 2400 baud
  • From: John DuBois
• Re: Com 1 sticks at 2400 baud
  • From: Flip
• Re: Com 1 sticks at 2400 baud
  • From: Scott McMillan
• Com 1 sticks at 2400 baud
  • From: Flip
• Re: printerserver
  • From: Flip
• Re: Problems with OpenServer 6
  • From: pisymbol
• Re: nmap for openserver
  • From: Boyle M. Owl
• Re: printerserver
  • From: Brian K. White
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Glenn
• Re: printerserver
  • From: Rob Steinmetz
• Re: printerserver
  • From: Brian K. White
• Re: Problems with OpenServer 6
  • From: C. Coulter
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Eric
• Re: Mozilla 1.7.13 Mail & Newsgroups window on OSR6
  • From: Roger Cornelius
• nmap for openserver
  • From: Joe Chasan
• Re: Problems with OpenServer 6
  • From: D . Thomas Podnar
• Re: printerserver
  • From: Ian Wilson
• Re: printerserver
  • From: Bill Vermillion
• Re: printerserver
  • From: Flip
• Problem adding NIC drivers to OSR 6.0.0
  • From: RWP
• Re: Unixware 7.1.0 and ide drives over 128gb
  • From: pisymbol
• Re: Problems with OpenServer 6
  • From: pisymbol
• Re: Problems with OpenServer 6
  • From: C. Coulter
• Re: Mozilla 1.7.13 Mail & Newsgroups window on OSR6
  • From: Bob Cole
• Mozilla 1.7.13 Mail & Newsgroups window on OSR6
  • From: Roger Cornelius
• Re: Problems with OpenServer 6
  • From: pisymbol
• Re: Problems with OpenServer 6
  • From: D . Thomas Podnar
• Re: printerserver
  • From: Bill Vermillion
• Re: Problems with OpenServer 6
  • From: C. Coulter
• Re: Problems with OpenServer 6
  • From: Jeff Hyman
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: D . Thomas Podnar
• Re: printerserver
  • From: Ian Wilson
• Re: printerserver
  • From: Bill Vermillion
• Re: Unixware 7.1.0 and ide drives over 128gb
  • From: philby
• printerserver
  • From: Flip
• Problems with OpenServer 6
  • From: C. Coulter
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Chris Schmidt
• Re: Unixware 7.1.0 and ide drives over 128gb
  • From: Pat Welch
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: D. Thomas Podnar
• Re: Open Server 3.0 network printer problem Part III
  • From: Rob Steinmetz
• Re: Unixware 7.1.0 and ide drives over 128gb
  • From: philby
• Re: Open Server 3.0 network printer problem Part III
  • From: Brian K. White
• Re: Unixware 7.1.0 and ide drives over 128gb
  • From: Pat Welch
• Re: OSR507 Calendar Service - removable?
  • From: Dave Dickerson
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Bill Vermillion
• Re: sendmail : .forward and keeping copy
  • From: Bill Vermillion
• Re: Open Server 3.0 network printer problem Part III
  • From: Rob Steinmetz
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Chris Schmidt
• Re: Open Server 3.0 network printer problem Part III
  • From: Bela Lubkin
• Unixware 7.1.0 and ide drives over 128gb
  • From: philby
• Re: Open Server 3.0 network printer problem Part III
  • From: Brian K. White
• Re: How to mount and recover a storage array
  • From: Pat Welch
• Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Pat Welch
• How to mount and recover a storage array
  • From: Unixcat
• Re: Open Server 3.0 network printer problem Part III
  • From: Rob
• Re: OSR507 Calendar Service - removable?
  • From: Jeff Hyman
• Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
  • From: Chris Schmidt
• OSR507 Calendar Service - removable?
  • From: Dave Dickerson
• Re: sendmail : .forward and keeping copy
  • From: pablo
• Re: sendmail : .forward and keeping copy
  • From: Bill Vermillion
• Re: Open Server 3.0 network printer problem Part III
  • From: Brian K. White
• Re: Open Server 3.0 network printer problem Part III
  • From: Brian K. White
• Re: osr6 not killing child procs when osr5 did
  • From: foz_67
• Re: sendmail : .forward and keeping copy
  • From: Boyd Lynn Gerber
• Re: sendmail : .forward and keeping copy
  • From: pablo
• Re: sendmail : .forward and keeping copy
  • From: pablo
• Re: osr6 not killing child procs when osr5 did
  • From: Joe Chasan
• Re: Open Server 3.0 network printer problem Part III
  • From: Rob
• Re: osr6 not killing child procs when osr5 did
  • From: foz_67
• Re: osr6 not killing child procs when osr5 did
  • From: Joe Chasan
• Re: osr6 not killing child procs when osr5 did
  • From: ThreeStar
• Re: sendmail : .forward and keeping copy
  • From: Bill Vermillion
• osr6 not killing child procs when osr5 did
  • From: Joe Chasan
• Re: Open Server 3.0 network printer problem Part III
  • From: Brian K. White
• Re: Open Server 3.0 printer problem Part II
  • From: Rob
• Open Server 3.0 network printer problem Part III
  • From: Rob
• Re: is the SECSTOPIO = 1 still a problem in OSR6??
  • From: jboland
• sendmail : .forward and keeping copy
  • From: pablo
• Re: Proliant Ml370 G3 with 2CPU and SCO
  • From: jboland
• Re: Telnet sessions abnormal termination
  • From: jboland
• Re: Telnet sessions abnormal termination
  • From: James_Szabadics
• is the SECSTOPIO = 1 still a problem in OSR6??
  • From: XeniXman
• Re: Telnet sessions abnormal termination
  • From: Nachman Yaakov Ziskind
• Re: Telnet sessions abnormal termination
  • From: ThreeStar
• Re: Open Server 3.0 printer problem Part II
  • From: Rob
• Re: Proliant Ml370 G3 with 2CPU and SCO
  • From: Scott McMillan
• Proliant Ml370 G3 with 2CPU and SCO
  • From: Omar
• Telnet sessions abnormal termination
  • From: James_Szabadics
• Re: Open Server 3.0 printer problem Part II
  • From: Nachman Yaakov Ziskind
• Open Server 3.0 printer problem Part II
  • From: Rob
• Re: Ancient SCO Unix Question
  • From: Boyd Lynn Gerber
• Re: Ancient SCO Unix Question
  • From: Bill Campbell
• Re: Menu for SCO Unixware
  • From: Ian Wilson
• Re: Ancient SCO Unix Question
  • From: Boyd Lynn Gerber
• Re: Ancient SCO Unix Question
  • From: Boyd Lynn Gerber
• Re: Ancient SCO Unix Question
  • From: Rob Steinmetz
• Re: Ancient SCO Unix Question
  • From: Bela Lubkin
• Re: Ancient SCO Unix Question
  • From: Bill Vermillion
• Re: Ancient SCO Unix Question
  • From: Bill Campbell
• Re: Ancient SCO Unix Question
  • From: Bela Lubkin
• Re: Menu for SCO Unixware
  • From: philby
• Re: LAN drivers for UW 7.1.0
  • From: philby
• Re: Ancient SCO Unix Question
  • From: Brian K. White
• Re: Ancient SCO Unix Question
  • From: Rob Steinmetz
• Re: Ancient SCO Unix Question
  • From: Bill Vermillion
• Re: Ancient SCO Unix Question
  • From: Boyd Lynn Gerber
• Re: LAN drivers for UW 7.1.0
  • From: Steve M. Fabac, Jr.
• Re: Ancient SCO Unix Question
  • From: Rob Steinmetz
• Re: Ancient SCO Unix Question
  • From: Rob Steinmetz
• Re: Ancient SCO Unix Question
  • From: Bill Campbell
• Re: Ancient SCO Unix Question
  • From: Boyd Lynn Gerber
• Re: Menu for SCO Unixware
  • From: Bill Campbell
• Re: Ancient SCO Unix Question
  • From: Bill Campbell
• LAN drivers for UW 7.1.0
  • From: philby
• Re: Menu for SCO Unixware
  • From: philby
• Ancient SCO Unix Question
  • From: Rob Steinmetz
• FS: New Specialix Modular Terminal Adapters MTA/M XIO
  • From: Electronicamuse
• Re: uucp using wildcard
  • From: Bill Campbell
• uucp using wildcard
  • From: Peter Dominey
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Bill Vermillion
• Re: sco 5.06 IRQ conflicts...
  • From: Bill Vermillion
• Re: Disk error
  • From: Walter Vaughan
• Re: sco 5.06 IRQ conflicts...
  • From: akhan
• Disk error
  • From: Tore
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Günther Stößl
• Re: sco 5.06 IRQ conflicts...
  • From: Lori
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Lori
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Lori
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Brian K. White
• Re: OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Jean-Pierre Radley
• Re: IOMEGA Rev intermittent failures
  • From: billa
• OpenServer 5.0.6 doesn't find SCSI Tape
  • From: Günther Stößl
• Re: VMWARE AND SCO
  • From: Bela Lubkin
• Re: IOMEGA Rev intermittent failures
  • From: Brian K. White
• Re: IOMEGA Rev intermittent failures
  • From: Pat Welch
• VMWARE AND SCO
  • From: naveedkb
• Re: sco osr5 snmp fails - getone localhost public mib-2.25.1.6.0
  • From: Jeff Liebermann
• Re: IOMEGA Rev intermittent failures
  • From: Enrique Arredondo
• sco osr5 snmp fails - getone localhost public mib-2.25.1.6.0
  • From: dustinable
• Re: adst70 troubles with OpenServer 6
  • From: jboland
• Re: Let the festivities begin
  • From: lumber_cartel

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(16)