Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- From: "Steve M. Fabac, Jr." <smfabac@xxxxxxx>
- Date: Wed, 14 Mar 2007 15:01:01 GMT
jboland@xxxxxxx wrote:
On 10 Mar, 17:45, "Steve M. Fabac, Jr." <smfa...@xxxxxxx> wrote:
Steve M. Fabac, Jr. wrote:
defbootstr link=perc disable=dptr,piiop,efp,wdex,mdac
Srom=wd(0,0,0,0) Stp0=perc(0,1,6,0) Sdsk=perc(0,0,0,0)
The above recommends setting both channels to RAID. I
know that I have not tried that. All failures to date have
been with channel 1 set to RAID and channel 2 set to SCSI.
I'll reset channel 2 to RAID the next time I'm on site on
this install.
Now, can anyone translate that defbootstr instruction above
for use on SCO 6.0?
Steve,
There is no direct translation of this. OpenServer 6 includes the
drivers for the Dell Perc RAID 4 and if the Perc controller is
properly configured it should just be picked up at ISL.
John
John,
What is "properly configured"? I can find no information at Dell or
SCO on the "proper" configuration. The mega driver says it works
with the perc4/Di but it has no "proper" configuration information
in the driver package description.
--
Steve Fabac
S.M. Fabac & Associates
816/765-1670
.
- Follow-Ups:
- References:
- Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- From: Steve M. Fabac, Jr.
- Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- From: Steve M. Fabac, Jr.
- Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- From: jboland
- Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- Prev by Date: Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- Next by Date: HP External USB DVD writer on Openserver 6.0
- Previous by thread: Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- Next by thread: Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
- Index(es):
Relevant Pages
|
