Re: How to format DOS partition?


"Jean-Pierre Radley" <jpr@xxxxxxx> wrote in message
news:20070921173955.GE2980@xxxxxxxxxxxxxxxxxxx
Arby typed (on Fri, Sep 21, 2007 at 01:20:33PM -0400):
| I'm trying to allow the booting of either MS-DOS (version 5.00 or 6.22)
or
| SCO Openserver 5.0.7 from a SCSI drive. At boot time, the "bootos ?"
| command shows that there's both a DOS_16 partition (32 MB in size) and
an
| Osr (8.5 GB in size) partition. (I installed Osr 5.0.7 with the
"custom"
| partition option.) Osr 5.0.7 boots fine, but when bootong from an
MS-DOS
| floppy, the MS-DOS fdisk command doesn't see any valid DOS partitions on
the
| hard drive.
|
| I've booted a couple parttion managers from a bootable CD-ROM, and they
see
| both partitions, as well as unused space and the master boot record
(MBR).
|
| Any suggestions on how I can format the DOS_16 partition so that it will
| boot dos when I enter the DOS command at the "boot:" prompt?

I've always thought it was necessary to install DOS (or Windows) first,
and then install OSR 5.

--
JP
==> http://www.frappr.com/cusm <==

Thanks. Your suggestion worked. All that was required was to wipe
everything clean and start again. After MS-DOS 6.22's FDISK command failed
to work on this drive (for some reason), I tried "Free FDISK", version
1.3.0, by Brian E. Reifsnyder, and it worked perfectly. It's just 38kB in
size and looks and feels just like MS-DOS's fdisk. With it, I created a 30
MB DOS_16 partition, formatted it, installed the DOS files that I needed
there, then installed Osr 5.0.7 (again). Osr's boot manager now works as
documented.

Thanks to Symbios's aspi8xx.sys and cdsym.sys drivers, DOS now sees the
CD-ROM.

This server-to-be has a second SCSI drive; I'll probably just use a freeware
version of the MS-DOS based Ranish Partition Manager to copy the entire
disk0 image to the second drive . . . to be used if I mess up the
installation: reboot, goto DOS at the boot: prompt, run the partition
manager, clone the second drive unto the first drive, reboot, and cross my
fingers.

For grins I'm playing with NDIS drivers on the onboard NIC. I'm accustomed
to having NetWare servers available as all-purpose file servers, but none
exist at this site. I wonder if I can get some version of Microsoft's SMB
working on DOS???

Is there a DOS based Drive Image- or Ghost- like program that's smart enough
to compress SCO Osr Unix partitions when creating an image file?



.

Relevant Pages

  • Re: Windows multiboot (aaargh!)
    ... > - Make a DOS boot floppy with FDISK and FORMAT on, ... The Linux boot floppy is a bit more tricky. ... > partition, ...
    (Debian-User)
  • Re: Using MSDOS
    ... The second partition is available for anything, such as MSDOS, and can be ... Use your boot floppy as boot image for the CD. ... that the DOS partition needs to be reasonably near the front of the ... format DOS and XPe partitions with /s, ...
    (microsoft.public.windowsxp.embedded)
  • Re: Windows multiboot (aaargh!)
    ... If I want to boot DOS I just ... They don't insist on being the first partition. ... that are to be for 95 or 98, install MSCDEX.EXE and the CD-ROM ...
    (Debian-User)
  • Re: Dual boot question
    ... >>> Windows 2000 running and now I want to run DOS on it as well. ... > partition is 10GB, is that too big for DOS? ... Download a copy of the XOSL boot manager. ... Install the second hard disk as the primary master. ...
    (microsoft.public.win2000.setup)
  • Re: MS DOS 5-1 (fdisk command)
    ... Dos 5.00.500 comes with XP. ... One uses Disk Management or XP's setup program to partition. ... the fdisk command (along with several other DOS ...
    (microsoft.public.windowsxp.general)