Re: Does 5.0.7 run well on modern hardware?
- From: stephen@xxxxxxxxxxxx (Stephen M. Dunn)
- Date: Wed, 30 Jul 2008 02:32:56 GMT
In article <48Pjk.16733$mh5.7268@xxxxxxxxxxxxxxxxxxxx> "Bob Bailin" <72027.3605@xxxxxxxxxxxxxx> writes:
$The main problem 5.0.7 has with modern motherboards is that it doesn't
$support native SATA controllers (AHCI). It will work with SATA drives
$if the BIOS is set to legacy mode, but that's not an option if you're dual
$booting with XP, which works much more efficiently in native AHCI mode.
Fair'nuff - but I don't mind using a recent PATA drive, and while
there are quite a few motherboards that omit PATA, there's no shortage
of boards that still offer it (albeit usually only one channel).
$If you use an old PCI video card, it's sure to work, but again, XP will
$run terribly on it, and you generally can't use both onboard and PCI
$video simultaneously on most motherboards.
Yup - really not a practical option. I don't need high-end video
cards, but I do need something better than PCI. It would have to be
either the embedded video or a PCIe card.
$The simplest solution would be to get yourself a free copy of MS Virtual PC
$or VMware and install 5.0.7 on a virtual machine. There have been numerous
$posts in the ng on this topic.
Yeah, I know that's an option. It's not one I'm particularly keen
on, but if the final answer to my question is "you're not gonna get
5.0.7 to run on anything remotely modern" then I'll consider whether
this one is worth the hassle - and from the numerous posts in the ng
on this topic, I know that sometimes this does *not* go smoothly.
Thanks for your response!
--
Stephen M. Dunn <stephen@xxxxxxxxxxxx>
----------------------------------------------------------------------------------> http://www.stevedunn.ca/ <----------------<<<
Say hi to my cat -- http://www.stevedunn.ca/photos/toby/
.
- Follow-Ups:
- Re: Does 5.0.7 run well on modern hardware?
- From: Bill Campbell
- Re: Does 5.0.7 run well on modern hardware?
- References:
- Does 5.0.7 run well on modern hardware?
- From: Stephen M. Dunn
- Re: Does 5.0.7 run well on modern hardware?
- From: Bob Bailin
- Does 5.0.7 run well on modern hardware?
- Prev by Date: Re: Does 5.0.7 run well on modern hardware?
- Next by Date: Re: Does 5.0.7 run well on modern hardware?
- Previous by thread: Re: Does 5.0.7 run well on modern hardware?
- Next by thread: Re: Does 5.0.7 run well on modern hardware?
- Index(es):
Relevant Pages
|