Setting up ftp server and netgear rp114

From: LordTaki (taki666@hotmail.com)
Date: 04/03/03 

From: taki666@hotmail.com (LordTaki)
Date: 3 Apr 2003 05:32:37 -0800

Hi everyone,

here's my situation.

I have two ftp servers in my lan and a very weak netgear rp114.

The first ftp server is 192.168.0.26 running on port 21 (W2000).
The second ftp server is 192.168.0.24 running on port 8079 (Solaris
5.8 Generic_108528-18 sun4u sparc SUNW,Ultra-60).

A week ago I had only the Solaris server running on port 21.
The port-forwarding on the netgear rp114 was simple:
PORT - SERVER IP ADRESS
21 - 192.168.0.24

Now...
I've edited /etc/inet/services to set ftp port to 8079.
The ftp server is working fine locally.
I've edited the netgear configuration:
21 - 192.168.0.26
8079 - 192.168.0.24

When I try to upload a file it creates an empty one :(

I tried to play with the ftp-data parameter in /etc/inet/services
without any good result :(

Any idea?

Thanks.

Relevant Pages

  • RE: blocking IPs for FTP server
    ... With Port Sentry you can use the Advanced Stealth Scan Detection. ... blocking IPs for FTP server ... holding too many open connections. ...
    (Security-Basics)
  • RE: Hidden windows ports, files and services.
    ... also apply for IE's cache. ... be the work of a root kit of some sort. ... and I'd like to analyze the ftp server. ... |was by doing an nmap port scan of the system. ...
    (Security-Basics)
  • Re: Hidden windows ports, files and services.
    ... and I'd like to analyze the ftp server. ... Prior to XP SP2, I used to be able to go through the c$ share and see ... was by doing an nmap port scan of the system. ... downloaded fresh version of each and tried again. ...
    (Security-Basics)
  • Re: Ports necessary for running a FTP-server?
    ... The FTP server should be listening on the LAN IP address of the Winroute ... The port mapping should redirect FTP traffic to the Winroute LAN ... >> install will not allow an Internet client to connect to a Winroute ...
    (comp.security.firewalls)
  • Re: Why do i need to use passive transfers?
    ... data connection from its TCP port 20 to a port specified by the FTP client ... The FTP server in PORT mode does not try ... The reason why PASV mode works so often behind a firewall is that the ... establish the data connection with the client. ...
    (comp.security.firewalls)