T3 Array with NT2000 Server

From: Rodrick Brown (phusnikn-nospam-_at_cynikal.net)
Date: 08/09/03 

Date: Sat, 09 Aug 2003 07:33:01 GMT

Anyone here successfully using NT 2000 with T3 Array ? for the life of me
i'm unable to get the NT box to see any luns I have not yet tried to update
the firmware on the Qlogic switches or the T3 so I'm not sure if this is
needed if anyone has this working and can give some insight please give me a
heads up.

Relevant Pages

  • T3 Array with NT2000 Server
    ... Anyone here successfully using NT 2000 with T3 Array? ... for the life of me ... i'm unable to get the NT box to see any luns I have not yet tried to update ... heads up. ...
    (comp.sys.sun.admin)
  • SUMMARY: 1TB External RAID shows up as 512GB
    ... that multi-LUN SCSI-based devices fail to show LUNS beyond the first one. ... The raid controller is Compaq smart array controller 5300 ... The driver for the raid controller is cpqary3. ...
    (SunManagers)
  • Re: RAID A1000: Cant see the module
    ... I applied the glm patch also. ... You should see the luns listed... ... so it seems the system is quite confused with the array. ... backout patch and rm6, clean the references to it and power-cycle system ...
    (comp.unix.solaris)
  • Re: Please help - adaptec 2820sa not ... RESOLVED
    ... Sysinstall does _not_ see my 2.7TB raid6 array. ... You should make two LUNs, and concat them or stripe them with GEOM. ... You shouldn't waste either disk space or money. ... If I make one array, I lose 25% to raid overhead. ...
    (freebsd-questions)
  • SUMMARY: Help! Self Induced 6540 Catastrophe
    ... firmware command for a StorageTek 6540 to revert a 'reset array' ... rather than manually recreating the LUNs. ... I've finally caught up after losing everything on this array. ...
    (SunManagers)