SunBlade 150 with IntraServer ITI-6200
From: Langelage, Frank (frank_at_lafr.de)
Date: 09/30/03
- Next message: Pewter: "Sun PCI Compatibility"
- Previous message: Chandra Garud: "Re: process address in ps -le"
- Next in thread: David B. Chorlian: "Re: SunBlade 150 with IntraServer ITI-6200"
- Reply: David B. Chorlian: "Re: SunBlade 150 with IntraServer ITI-6200"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 30 Sep 2003 00:39:36 +0200
I try to get IntraServer card running with my SunBlade 150 on Solaris 9
(08/03 with all patches) but did not succeed so far.
I can see the devices when executing "show-devs" at ok-prompt and
"probe-scsi-all" shows me the attached disks.
But after reconfigure-reboot I still have no scsi devices in /dev/dsk.
partitial output of prtdiag:
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
0 pci 33 +s/system-board isa/isadma (dma)
0 pci 33 +s/system-board isa/su (serial)
0 pci 33 +s/system-board isa/su (serial)
0 pci 33 +s/system-board pci108e,1101 (network)
SUNW,pci-eri
0 pci 33 +s/system-board pciclass,0c0010 (firewire)
0 pci 33 +s/system-board pci10b9,5451 (sound)
0 pci 33 +s/system-board pci10b9,5229 (ide)
0 pci 33 +s/system-board SUNW,m64B (display)
ATY,RageXL
0 pci 33 +tem-board/PCI2 IntraServer,Ultra2-scsi (scs+
IntraServer,ITI62xx
0 pci 33 +s/system-board IntraServer,Ultra2-scsi (scs+
IntraServer,ITI62xx
partitial output from prtconf -v:
pci, instance #0
Driver properties:
name='pm-want-child-notification?' type=boolean dev=none
name='pm-components' type=string items=3 dev=none
value='NAME=PCI bridge PM' + '1=Clock Off (B2)' +
'3=Full Power (B0)'
name='device_type' type=string items=1 dev=none
value='pci'
Hardware properties:
name='pci-config-regs' type=byte items=32
value=01.47.10.40.01.00.23.a0.00.00.00.00.00.00.00.00.00.01.01.00.22.80.11.11.03.00.03.00.00.01.ff.f1
IntraServer,Ultra2-scsi (driver not attached)
disk (driver not attached)
tape (driver not attached)
IntraServer,Ultra2-scsi (driver not attached)
disk (driver not attached)
tape (driver not attached)
There are drivers for this card for older versions of SunOS. I tried
this and got this on boot up:
LSI Logic 64-bit PCI Ultra2 Hi Performance SCSI Driver
Copyright 2001 LSI Logic
Copyright 1999, 2000 IntraServer Technology, Inc.
Copyright 1995, 1998 LSI Logic
ITHPS-5.03.00
ithps: [ID 294247 kern.warning] WARNING: ithps0: Fatal error (-7)
mapping PCI register memory
ithps: [ID 256581 kern.warning] WARNING: ithps0: Failed to map device
registers
ithps: [ID 240198 kern.warning] WARNING: ithps0: Failed to attach. This
adapter will not be installed
ithps: [ID 294247 kern.warning] WARNING: ithps1: Fatal error (-7)
mapping PCI register memory
ithps: [ID 256581 kern.warning] WARNING: ithps1: Failed to map device
registers
ithps: [ID 240198 kern.warning] WARNING: ithps1: Failed to attach. This
adapter will not be installed
This driver seems not to work with Solaris 9.
Also I read articles in this group saying, that adapters with chips like
this one (LSI Logic 53C896) are supported by Solaris 9.
What am I missing ?
Is anybody out there who got this card running on a Sparc system with
Solaris 9 ?
regards
Frank
- Next message: Pewter: "Sun PCI Compatibility"
- Previous message: Chandra Garud: "Re: process address in ps -le"
- Next in thread: David B. Chorlian: "Re: SunBlade 150 with IntraServer ITI-6200"
- Reply: David B. Chorlian: "Re: SunBlade 150 with IntraServer ITI-6200"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
