find out whether a disk has used at all

From: Joe Philip (joe.philip_at_verizon.net)
Date: 02/27/04 

Date: Fri, 27 Feb 2004 20:52:21 GMT

One of the disks in my A5100 array is not showing up in under Veritas or SDS
control. I want to use this disk for some other purpose. How do I make sure
that it is not used at all?

Relevant Pages

  • Disaster Recovery, SDS, Volume Manager
    ... Volume Manager. ... what's everyone's opinion on using SDS for the boot ... Since the 880's disks are 73GB, ... control of Volume Manager. ...
    (SunManagers)
  • Re: Partioning and volume creation
    ... going with the expensive Veritas Volume Manager. ... > disks throught the Fiber channel controller. ... > the 7 partitions limit. ... > disks from different disk arrays. ...
    (SunManagers)
  • Re: Linux does not care for data integrity
    ... > final non-volatile media control you can get a sane database but still ... Get an UPS just for the disks. ... caches after the rest of the machine died from a power loss. ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • SAN doubt (while upgrading OS)
    ... some disks from EMC and some of the disks from Hitachi storages. ... pkginfo | grep -i hitachi ... application VRTSfspro VERITAS File System ...
    (SunManagers)
  • Re: AS/400 RAID Array (or how to get a 9337 working?)
    ... If my memory did not fail me, when the control ... status of the disks, perhaps you may want to reformat everything and reraid ... > screens. ... > exhibiting this behavior. ...
    (comp.sys.ibm.as400.misc)