boot disk

From: sheep99dog (sheep99dog_at_go.com)
Date: 05/08/04 

Date: Sat, 8 May 2004 12:54:48 -0400

How does Solaris know where to boot from when it sees a

boot disk

command? Can I set this to correspond to booting from something like

/pci@1e,600000/pci@3/SUNW,isptwo4@sd@1,0

TIA.

Sheepdog

Relevant Pages

  • RE: XP Pro recovery console issue
    ... 301680 How To Create a Boot Disk for an NTFS or FAT Partition in Windows ... Use this command to repair the MBR of the boot partition. ... If the fixmbr command detects an invalid or non-standard partition table ...
    (microsoft.public.windowsxp.hardware)
  • Re: Windows reboot automatically continuously every time at the end of the procedure of load the SO
    ... > II tried with win98 boot disk but this doesn't work because my C drive is ... How I can disable any service with the Command Console? ... folder and any folder outside of this folder the console not allow to ... - To access your NTFS partition with the NTFS boot disk from your link: ...
    (microsoft.public.win2000.general)
  • Re: Computer problem - stop error on boot up
    ... it's running scandisk through DOS (it suggested scandisk rather than chkdsk). ... Use a boot disk from a 98/ME machine if you have one -- hopefully this comp has a floppy drive-- and boot the computer using the boot disk. ... When you come to the command prompt you want to use the chkdsk. ...
    (sci.med.transcription)
  • using dd to clone a system disk
    ... I have an ultra 10 with two 8 gig internal drives. ... boot disk and connected it to the 2nd. ... command) changed the jumper to indicate it is the master drive ...
    (SunManagers)
  • Re: command line set /p problem
    ... but command /k set is the only way to run a Dos command in NT. ... > floppy the version of command.com does not support the '/p' switch. ... The boot disk was created using ...
    (microsoft.public.windowsxp.help_and_support)