Re: Solaris 10 Install on Netra T1 /sbin/init failure
From: Matty (mattyml_at_daemons.net)
Date: 06/04/05
- Next message: sriram.sitaraman_at_gmail.com: "Re: Real Audio / Helix Player Plugin for Solaris 10 sparc"
- Previous message: UNIX admin: "Re: KVM switch recommendation"
- In reply to: David Gresham: "Solaris 10 Install on Netra T1 /sbin/init failure"
- Next in thread: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Reply: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Reply: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 04 Jun 2005 15:58:28 -0400
David Gresham wrote:
> I am trying to install Solaris 10 on a Netra T1 with 320mb
> of memory and 2 18gb disks. I go through the process
> of basically taking the defaults and providing network
> information.
>
> It goes through the process of installing and when it boots
> I get the following:
>
>
> Netra t1 (UltraSPARC-IIi 360MHz), No Keyboard
> OpenBoot 3.10.24 ME, 320 MB memory installed, Serial #12757538.
> Ethernet address 8:0:20:c2:aa:22, Host ID: 80c2aa22.
>
>
>
> Executing last command: boot
> Boot device: /pci@1f,0/pci@1,1/scsi@2/disk@0,0:a File and args:
> SunOS Release 5.10 Version Generic 64-bit
> Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
> Use is subject to license terms.
> WARNING: exec(/sbin/init) failed (file not found).
>
> (Could not start init) Program terminated
> ok
>
> scsi-probe-all reveals:
>
> /pci@1f,0/pci@1,1/scsi@2
> Target 0
> Unit 0 Disk SEAGATE ST318404LSUN18G 5221
> Target 1
> Unit 0 Disk SEAGATE ST318404LSUN18G 4207
>
> ok
>
> printenv
>
> Variable Name Value Default Value
>
> tpe-link-test? true true
> scsi-initiator-id 7 7
> keyboard-click? false false
> keymap
> watchdog-timeout 65535 65535
> watchdog-enable? false false
> ttyb-rts-dtr-off false false
> ttyb-ignore-cd true true
> ttya-rts-dtr-off false false
> ttya-ignore-cd true true
> ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
> ttya-mode 9600,8,n,1,- 9600,8,n,1,-
> cpci-probe-list 0,1,2,3,4,5,6,7,8,9,a,b, ... 0,1,2,3,4,5,6,7,8,9,a,b,
> pcia-probe-list 1 1
> pcib-probe-list 1,2,3 1,2
> mfg-mode off off
> diag-level max max
> d7s-flipped? false false
> #power-cycles 53
> system-board-serial#
> system-board-date
> last-poweroff-cause 0 0
> env-monitor enabled enabled
> shutdown-temperature 74 72
> warning-temperature 69 67
> fcode-debug? false false
> output-device ttya screen
> input-device ttya keyboard
> load-base 16384 16384
> auto-boot-retry? false false
> use-boot-table? false false
> boot-command boot boot
> auto-boot? false true
> watchdog-reboot? false false
> diag-file
> diag-device net net
> boot-file
> boot-device /pci@1f,0/pci@1,1/scsi@2 ... disk net
> local-mac-address? false false
> net-timeout 0 0
> ansi-terminal? true true
> screen-#columns 80 80
> screen-#rows 34 34
> silent-mode? false false
> use-nvramrc? false false
> nvramrc
> security-mode none
> security-password
> security-#badlogins 0
> oem-logo
> oem-logo? false false
> oem-banner
> oem-banner? false false
> hardware-revision
> last-hardware-update
> diag-switch? false false
> ok
>
> any ideas? I saw now errors during the install process at all.
>
>
> Dave
I would recommend booting from CDROM and mounting the root partition to
see if /sbin/init exists. I would also check /var/sadm/install/contents
to see if SUNWcsr
- Next message: sriram.sitaraman_at_gmail.com: "Re: Real Audio / Helix Player Plugin for Solaris 10 sparc"
- Previous message: UNIX admin: "Re: KVM switch recommendation"
- In reply to: David Gresham: "Solaris 10 Install on Netra T1 /sbin/init failure"
- Next in thread: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Reply: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Reply: David Gresham: "Re: Solaris 10 Install on Netra T1 /sbin/init failure"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
