Sol10 X86 and Adaptec RAID card

From: Lemieux (jlemieux_at_ccs.carleton.ca)
Date: 06/29/05 

Date: 29 Jun 2005 19:11:05 GMT

I installed an Adaptec 2230SLP Raid card in a Sol10
X86 machine. I know that Sol10 has Adaptec drivers (aac) but they don't get
loaded on boot -r.
Also checked the Device Configuration Assistant and no
Adaptec device shows up on the list. I'm I missing
something here?
I was able to create a Raid drive with on the board bios.
On boot up the RAID controller reports that the RAID
drive is ready.

Hoping to use Sol10 instead of Red Hat since I'm
surrounded by Sparc Solaris machines.

Thanks

Relevant Pages

  • Re: Xp and RAID from Adaptec problem
    ... Adaptec, I set up RAID 1. ... XPSP1 Pro, F6 to install RAID driver, select newest drivers from ... Check the boot order in the BIOS. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Problems with software RAID on SATA
    ... Connected to this are two 320GB drives ... >>which I want to turn into a RAID1 array. ... >>I'm almost certain it's a problem with initting the RAID arrays at boot. ...
    (Debian-User)
  • Re: Paul and Old Man: Cannot fix RAID5 failure ...
    ... I removed the drive reported in error, no boot or rebuild. ... I tried Universal Boot Disc but it won't load the RAID driver ... I was considering a parallel WinXP installation on a 4th disk, ... Maybe like in my case, actually 2 drives failed, while the RAID bios ROM ...
    (alt.comp.periphs.mainboard.asus)
  • Re: [SLE] please!! help me, completly lost!
    ... >machine which was equipped with hard drives configured as RAID.. ... or else to boot from a floppy. ... This is due to a bug in grub. ... Once booted you can switch to grub and setup the MBR on both drives. ...
    (SuSE)
  • problem with ldconfig
    ... Well, after I had reloaded my raid, ... I used to either hit F1 (to boot the ... Well, the other thing that's come up, I can't get my nvidia driver to work ... Version: GnuPG v2.0.4 (FreeBSD) ...
    (freebsd-hackers)