Re: Possible to burn CD that is readable on both Windows & Solaris?





ohaya wrote:
>
> Joerg Schilling wrote:
> >
> > In article <43D4804D.CACBEF9F@xxxxxxx>, ohaya <ohaya@xxxxxxx> wrote:
> > >Hi,
> > >
> > >I would like to burn some data CDs that will be readable on both Windows
> > >and Solaris. The files have long filenames.
> > >
> > >I've been trying to use mkisofs.exe (mkisofs 2.01-bootcd.ru
> > >(i686-pc-mingw32)) to create the .iso, and Nero to burn the .iso to CD.
> > >
> > >I've tried a number of command lines including:
> > >
> > >mkisofs -J -l -r -R -T -V %1 -allow-multidot -o %2.iso \%3
> > >
> > >where:
> > >
> > >%1 = label for CD
> > >%2 = name of .iso file
> > >%3 = directory where files are
> > >
> > >After burning the .iso with Nero, the CD is readable in Windows,
> > >including the long filenames, but it won't mount on Solaris, either
> > >using volmgt or manually.
> >
> > Did you try to use a cd-recording progrma that is known to work?
> >
> > ftp://ftp.berlios.de/pub/cdrecord/
> >
>
> Joerg,
>
> I've really been trying :(.
>
> I have both the cygwin mkisofs.exe, but I can't seem to make a CDROM
> that Solaris will even recognize. What I mean is when I put the CDROM
> into the drive on the Sun, the light blinks for a second, and that's it.
>
> I have some other CDs that someone else made, and I put them in the Sun,
> and the light comes on (not just blinks) and the CD drive spins up. I
> can then mount those other CDROMs both manually and using volmgt.
>
> For mkisofs, I've tried:
>
> mkisofs -o cd1.iso -J -R -V mylabel \CDROMDIR [to try both Solaris/Win
> compat.]
>
> mkisofs -o cd1.iso -R -V mylabel \CDROMDIR [to try just Solaris compat.]
>
> Thus far, I've been doing the burn using Nero, and I've gone through a
> pile of CDRs, with none of them mountable on Solaris, but I'm about to
> try cdrecord. If I do that, what would an appropriate command line be?
> I'm thinking something like:
>
> cdrecord -v speed=40 -dao -device=2,0,0 -eject cd1.iso
>
> (I did the -scanbus, and the CD burner looked like "2,0,0".).
>
> Does that cdrecord command like look correct?
>
> Thanks,
> Jim


Hi,

I just tried cdrecord, but again, the resulting CDROM would not mount on
my Sun Blade :(. Here's the cdrecord output:

-scanbus:

E:\'Ziptemp\cdrtools>cdrecord -scanbus
Cdrecord-Clone 2.01.01a01 (i686-pc-cygwin) Copyright (C) 1995-2004 Jörg
Schillin
g
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'ST380013' 'A ' '3.54' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) HOST ADAPTOR
scsibus1:
1,0,0 100) 'Imation ' 'IMW121032IAB ' '2.4B' Removable
CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) HOST ADAPTOR
scsibus2:
2,0,0 200) 'LITE-ON ' 'LTR-48125W ' 'VS0D' Removable
CD-ROM
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) HOST ADAPTOR


My attempt to burn:

E:\'Ziptemp\cdrtools>cdrecord -v speed=40 -dao dev=2,0,0 -eject cd1.iso
Cdrecord-Clone 2.01.01a01 (i686-pc-cygwin) Copyright (C) 1995-2004 Jörg
Schillin
g
TOC Type: 1 = CD-ROM
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'LTR-48125W '
Revision : 'VS0D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1422080 = 1388 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 547 MB
Total size: 629 MB (62:20.48) = 280536 sectors
Lout start: 629 MB (62:22/36) = 280536 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 79309
Forcespeed is OFF.
Starting to write CD/DVD at speed 40 in real SAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 547 of 547 MB written (fifo 100%) [buf 97%] 38.4x.
Track 01: Total bytes read/written: 574537728/574537728 (280536
sectors).
Writing time: 156.163s
Average write speed 25.4x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 2.560s
cdrecord: fifo had 9050 puts and 9050 gets.
cdrecord: fifo was 0 times empty and 6013 times full, min fill was 89%.
.



Relevant Pages

  • lite-on burner, suse 8.2
    ... I've tried to burn cd's under SuSE 8.2 pro several times with my lite-on ... cdrecord: Warning: using inofficial libscg transport code version ... Waiting for reader process to fill input buffer ... ...
    (alt.os.linux.suse)
  • Re: gtoaster problem
    ... > If you burn files, on Track you should have only Gnometoaster ... cdrecord -v dev=1,0,0 datacd.raw ... Waiting for reader process to fill input buffer ... ... Sense Key: ...
    (Fedora)
  • cdrecord fails performing OPC
    ... I have a Sony CDRW/DVDRW drive that can burn DVD perfectly well ... However if I try to burn any CD-R using cdrecord ... Profile: 0x002B ... Waiting for reader process to fill input buffer ... ...
    (comp.os.linux.hardware)
  • Re: Trick to burning a bootable Debian CD?
    ... >> Are there any freeware utilities to burn an ISO image to CD (e.g., ... contain Freedos or even the first part of a Windows installer. ... all you need to do is download the images and burn them to CD. ... This can be done in the same run of cdrecord as you ...
    (Debian-User)
  • Re: latest cdrecord problem status
    ... > burn away, or b) boot into an earlier kernel. ... > Here's a trick I've used to help teach myself the necessary cdrecord ... installing, or **not** installing the ide-scsi module. ...
    (Fedora)