Re: Failed Controller w/ RAID Manager 6.2

I forgot to mention that I'm using RAID Manager 6.2 on a Solaris box.

I installed the new controller. I powered off the array and connected
it to the new controller.

I want to make sure I understand this correctly. I can just move the
A1000 to the new controller and do a boot -r? I don't want to loose my
current LUN configuration from the old controller.

.

Relevant Pages

  • Re: Installing Adaptec 1420SA SATA RAID controller
    ... neither disk nor RAID array. ... What about returning the Adaptec controller and replacing it with some ...
    (microsoft.public.windows.server.sbs)
  • Re: Advice on RAID crash
    ... the cascade effect eventually brought the whole array down. ... While the controller does "mask" things to some degree ... ... You should be able to plug in one of Adaptec's newer RAID controllers and have it natively pickup the existing array configuration on the existing drives. ...
    (microsoft.public.windows.server.sbs)
  • SUMMARY: Reduced scsi sync-speed
    ... First try was a controller reset on the infortrend raid array. ... Controller reboot time was somewhat less than 1 minute, ... raid controller) one of the two u320 scsi channels runs very slow. ...
    (SunManagers)
  • Re: Solaris 9/10, usb storage > 500 gig
    ... controller but only sees 500 gigs of the array. ... Solaris 9 and a rev of 10 from approx June ... Does Solaris support> 500 gig USB drives? ...
    (comp.unix.solaris)
  • Re: Installing Adaptec 1420SA SATA RAID controller
    ... creating an array from an existing disk. ... Any suggestions for a clean/simple/safe disk cloning/imaging utility? ... The new RAID controller knows ...
    (microsoft.public.windows.server.sbs)