Re: Adding a second processor SUN 250 with Solaris 8
- From: Michael Laajanen <michael_laajanen@xxxxxxxxx>
- Date: Wed, 08 Mar 2006 13:47:56 +0100
rapaz wrote:
Hi Michael,I guess that this variable is used as part of the server tolerance for failing parts so Solaris when a CPU fails during operation this varible is set during dump or similar process and then the system comes up in
I´ve done "setenv .upa-noprobe-mask 0" in Openboot and boot -r. Now I
can see the second processor.
with prtdiag:
System Configuration: Sun Microsystems sun4u Sun (TM) Enterprise 250
(2 X Ultr
aSPARC-II 296MHz)
System clock frequency: 99 MHz
Memory size: 1536 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
SYS 0 0 296 2,0 US-II 2.0
SYS 1 1 296 2,0 US-II 2.0
========================= Memory =========================
Interlv. Socket Size
Bank Group Name (MB) Status
---- ----- ------ ---- ------
0 none U0701 128 OK
0 none U0801 128 OK
0 none U0901 128 OK
0 none U1001 128 OK
1 none U0702 128 OK
1 none U0802 128 OK
1 none U0902 128 OK
1 none U1002 128 OK
2 none U0703 128 OK
2 none U0803 128 OK
2 none U0903 128 OK
2 none U1003 128 OK
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
SYS PCI 33 0 TSI,gfxp GFXP
No failures found in System
===========================
With psrvinfo -v:
Status of processor 0 as of: 03/08/06 13:04:22
Processor has been on-line since 03/08/06 12:59:41.
The sparcv9 processor operates at 296 MHz,
and has a sparcv9 floating point processor.
Status of processor 1 as of: 03/08/06 13:04:22
Processor has been on-line since 03/08/06 12:59:43.
The sparcv9 processor operates at 296 MHz,
and has a sparcv9 floating point processor.
even with uname:
SunOS tox 5.8 Generic_117350-33 sun4u sparc SUNW,Ultra-250System =
SunOS
Node = tox
Release = 5.8
KernelID = Generic_117350-33
Machine = sun4u
BusType = <unknown>
Serial = <unknown>
Users = <unknown>
OEM# = 0
Origin# = 1
NumCPU = 2
It seems to be working. I dont know why was the reason to have the
.upa-noprobe-mask set to 2.
Thank you very much for your help, Michael.
Best Regards
-Ramón
reduced mode(onlyone CPU).
/michael
.
- Follow-Ups:
- References:
- Adding a second processor SUN 250 with Solaris 8
- From: rapaz
- Re: Adding a second processor SUN 250 with Solaris 8
- From: Michael Laajanen
- Re: Adding a second processor SUN 250 with Solaris 8
- From: rapaz
- Re: Adding a second processor SUN 250 with Solaris 8
- From: Michael Laajanen
- Re: Adding a second processor SUN 250 with Solaris 8
- From: rapaz
- Re: Adding a second processor SUN 250 with Solaris 8
- From: Michael Laajanen
- Re: Adding a second processor SUN 250 with Solaris 8
- From: rapaz
- Adding a second processor SUN 250 with Solaris 8
- Prev by Date: Re: How to restart DNS.
- Next by Date: Re: How to restart DNS.
- Previous by thread: Re: Adding a second processor SUN 250 with Solaris 8
- Next by thread: Re: Adding a second processor SUN 250 with Solaris 8
- Index(es):
Relevant Pages
|
