Jumpstart Install Hang

Hi Everyone,

I was wondering if someone might be able to help me out. I am setting up a
jumpstart environment for the first time and my test install is hanging.
Below is what happens when I perform a jumpstart install on a test machine:

[Begin Output]
ok boot net - install
Boot device: /pci@1f,0/pci@1,1/network@1,1 File and args: - install
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
2aa00
Requesting Internet address for 8:0:20:b2:e8:3b
SunOS Release 5.9 Version Generic_118558-11 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
whoami: no domain name
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?
SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?
Skipping interface hme1
Configured interface hme0
Searching for configuration file(s)...
[End Output]

It never proceeds beyond this point. Does anybody know what it is
specifically looking for at this point? I have spent a good amount of time
searching the internet for solutions but haven't found much. Any help at
all would be greatly appreciated. Thanks in advance.

Chris



.

Relevant Pages

  • Re: HOWTO configure Debian Woody
    ... first time it was probably left in the half-configured state. ... When in doubt just run 'apt-get install -f'. ... For X11 some people like to not use the Debian postinst debconf ... back and set the debconf configuration to "No". ...
    (Debian-User)
  • Re: Jumpstart Install Hang
    ... jumpstart environment for the first time and my test install is hanging. ... Below is what happens when I perform a jumpstart install on a test machine: ... Using RPC Bootparams for network configuration information. ...
    (comp.unix.solaris)
  • Re: Jumpstart Install Hang
    ... jumpstart environment for the first time and my test install is hanging. ... Below is what happens when I perform a jumpstart install on a test machine: ... Using RPC Bootparams for network configuration information. ...
    (comp.unix.solaris)
  • Re: IMHO, 9.0 kicks ass
    ... This is the first time I've had a SuSE install work perfectly ... This is also the first time I've got the built-in scanner on my LaserJet ... although that wasn't an automatic configuration (but ...
    (alt.os.linux.suse)
  • help with a home network jumpstart
    ... I have the blade running BIND 8 to serve DNS to the home network. ... Here's the output of the boot net - install: ... Using RPC Bootparams for network configuration information. ... Using begin script: install_begin ...
    (SunManagers)