Re: how to check hardware configuration

Brian Mac wrote:
definitely prtdiag -v is a great place to start. for hard disk
information, take a look at iostat (the -E option is quite helpful for
finding out sizing information).


Yep... some of the commands below will only work on
certain hardware configurations...
(hyphenized names below require your input)

/usr/platform/your-model/sbin/prtdiag
/usr/sfw/bin/ipmitool fru
/usr/sbin/prtconf -pv
/usr/bin/iostat -Enr
/usr/sbin/psrinfo -p -v
/usr/bin/kstat ce:interface-name
/usr/sbin/ndd -set /dev/interface-name instance interface-number
/usr/sbin/ndd -get /dev/interface-name link_speed
/usr/sbin/ndd -get /dev/interface-name link_duplex
/usr/sbin/ndd -get /dev/interface-name link_mode

And if you have x86 Solaris platforms, I recommend compiling
dmidecode (google for it).
.

Relevant Pages