SRM Console disappeared

From: Gary Smith (mintofoxburr_at_yahoo.ca)
Date: 03/18/04

  • Next message: Bob Harris: "Re: Performance problem (I/O)" 
    Date: 18 Mar 2004 08:52:03 -0800

    I had just updated a DS10 with SRM 6.6 Went well did a verify reset
    the Alpha and now nothing the Alpha comes on boot I get no screen,
    nothing. Took the graphics card out and tried to boot to console and
    still nothing just a flashing cursor no SRM nothing, system seems to
    be on. Any suggestions please help.

  • Next message: Bob Harris: "Re: Performance problem (I/O)"

    Relevant Pages

    • Re: Compaq DS 10 Boot and module load problems
      ... in fact since you have SRM it's a lot easier ... First of all I'd suggest you upgrade to SUSE 8.1 (the network ... There is also lots of documentation specifically for Alpha (although ... you have to know where your boot partition and root ...
      (comp.os.linux.alpha)
    • Re: Alpha Server 1000A OS install and/or documentation help
      ... An Alpha Binaries CD will boot directly as has been mentioned ... >> I've tried every other avenue for documentation for the Alpha Server ... > As others have stated, VAX software will not run on an Alpha, and Alpha ... > a new hobbyist license and media with the latest available version of VMS. ...
      (comp.os.vms)
    • WARNING: iget, dinode no. 2 changed
      ... scheduled power outage. ... twin Alpha 255 via rlogin, or get an X screen using VNC), therefore I ... usually turn it on, wait a bit, type "boot" on the keyboard (the kbd LEDS ... and a corrupted entry in the binary error log. ...
      (Tru64-UNIX-Managers)
    • Re: DS10: "failed to load execlet"?
      ... It creates a new root and adds the required stuff in the LANCP database. ... You also want to make sure that CLUSTER_AUTHORIZE.DAT is going to be accessible to the new node if you plan to have it join the cluster. ... APB.EXE gets you to a point where there is some sort of MSCP access that allows the boot to continue. ... I have managed to have an alpha boot from a VAX without the alpha having VMSCLUSTER set to 0 and it completed the boot. ...
      (comp.os.vms)
    • Re: 433au workstation SRM console access.
      ... > On the SRM (I have Alpha Servers, not workstations. ... >>Sounds stupid but I am trying to access the SRM console on a 433au. ... The alpha stations I normally work with have a hardware ...
      (comp.unix.tru64)