Re: Additional Network Cards

From: Bryan Brock (bbrock_at_gmail.com)
Date: 01/10/05 

Date: 10 Jan 2005 10:36:18 -0800

Not sure about Cisco and the 500au, but with Cisco and Sun HW, I've had
success forcing the UNIX machine to 100-Full and setting the Cisco
switch to Auto-detect.

Relevant Pages

  • Re: Cat 2924
    ... Copyright 1986-2004 by cisco Systems, ... BOX in both H/W and S/W, compared to a C2924-XL Switch... ... FastEthernet0/1 failed front-end loopback test ... to make the port configuration "visible", you need to apply 2 commands ...
    (comp.dcom.sys.cisco)
  • Re: VPN over wireless
    ... I personally use Cisco since I am Cisco Certified. ... Support with a Cisco Switch it would work. ... on my network - and no success. ... You will still the need the Router to issue DHCP and ...
    (microsoft.public.windows.server.sbs)
  • Re: Cat 2924
    ... Copyright 1986-2004 by cisco Systems, ... BOX in both H/W and S/W, compared to a C2924-XL Switch... ... FastEthernet0/1 failed front-end loopback test ... to make the port configuration "visible", you need to apply 2 commands ...
    (comp.dcom.sys.cisco)
  • Re: Brocade / Cisco interop issue
    ... By bouncing the host port connected to the Cisco switch you're causing the ... to see if this removes the Brocade failure. ...
    (comp.arch.storage)
  • Re: Cisco vs. Netgear: 24 port gigabit managed switch
    ... The Baystack 450 is 10/100 with no gigabit. ... All three of my 450 stacks connect up to our HP9304 backbone switch via gig ethernet on multimode. ... But the Cisco 2970 and 3560 and 3750 are noticably more flexible ... layer 3 facilities for about 6 months, ...
    (comp.dcom.lans.ethernet)