Re: How to add a TZ87 drive on alphaserver 100 tru64 v4.0

From: Brian Haley (Brian.Haley_at_nospam_hp.com)
Date: 02/01/05

  • Next message: clifford.kh.yeung_at_gmail.com: "Re: Monitoring dlm locks - system wide..." 
    Date: Tue, 01 Feb 2005 19:13:17 GMT

    You'll need to boot genvmunix first though, and I'm pretty sure doconfig
    isn't in /sys/conf, it's in /usr/sbin/

    -Brian

    Richard Zoller wrote:
    > The device is probably not seen by the kernel.
    >
    > $ cd /sys/conf
    > $ ./doconfig (Do not use the -c parameter and do not edit the kernel
    > file manually)
    >
    > The same topic has been discussed a couple of threads further up.
    > (DAT72 install problem...)
    >
    > Ric
    >
    > Fodil wrote:
    >
    >> Hi
    >>
    >> Any help about what to do for the system to be able to use this new
    >> device
    >> is very welcome.
    >>
    >> The device is seen at the >>> level as DKA400
    >> bus 0 node 4 target 4 lun 0
    >> I tryied cd /dev
    >> ./MAKEDEV tz4 unsuccessfully
    >> Still can't mount the device
    >>
    >> Regards.
    >>
    >> Fodil
    >
    >

  • Next message: clifford.kh.yeung_at_gmail.com: "Re: Monitoring dlm locks - system wide..."
    • Quantcast